Hi,
On Mon, 2011-03-28 at 12:29 +0200, Norman Feske wrote:
> Apart from the constant noise, microphone recording and playback seems to
> work. The same for line in
> recording and playback. - I wonder then why the input has no effect on
> the effects in flickernoise?
This is unexpected indeed...
Hi Sebastien,
On 03/17/2011 05:59 PM, Sebastien Bourdeauducq wrote:
> You may also want to run the testing tool at
> http://www.milkymist.org/test_tool/boot.bin
> use this command to run (with the jtag/serial cable connected):
> flterm --port /dev/ttyUSB0 --kernel boot.bin
> and type "serialboot"
Hi Sébastien,
> You may also want to run the testing tool at
> http://www.milkymist.org/test_tool/boot.bin
> use this command to run (with the jtag/serial cable connected):
> flterm --port /dev/ttyUSB0 --kernel boot.bin
> and type "serialboot" at the BIOS prompt (you'll need to abort automatic
> b
Hi,
> Since the ML401 board that uses the LM4550B codec exhibits significant
> noise on the outputs as well (at least on my board), I suspect the codec
> chip may have something to do with that. I have just requested samples
> of WM9707, we'll see if it improves things (it should be an easy PCB
>
Hi,
On Thu, 2011-03-17 at 17:52 +0100, Norman Feske wrote:
> I think, I tried almost all of the effects.
You may also want to run the testing tool at
http://www.milkymist.org/test_tool/boot.bin
use this command to run (with the jtag/serial cable connected):
flterm --port /dev/ttyUSB0 --kernel boo
Hi Sebastien,
> Which patch did you try? Some are programmed not to react to audio at
> all. What audio source did you connect and how?
I think, I tried almost all of the effects. Some look really cool even
without any input. .-) For the output, I tried a headphone as well as a
set of active spea
Hi,
On Thu, 2011-03-17 at 11:23 +0100, Norman Feske wrote:
> However, today I noticed a problem with audio. Audio input
> does not seem to have any influence on the graphical effects.
Which patch did you try? Some are programmed not to react to audio at
all. What audio source did you connect and
Hello,
I received my MM1 board yesterday and so far, enjoyed very much
exploring it. However, today I noticed a problem with audio. Audio input
does not seem to have any influence on the graphical effects.
Furthermore, the audio output is extremely noisy regardless of the
volume sliders or the pre
