Hello Jacob,
On 2023-07-13 18:59, Jacob Killelea wrote:
Hi Christian,
This looks awesome! Do you have any interest in adding support for the
i.MXRT1062 based Teensy 4.0 and Teensy 4.1?
- Jacob
the Teensy look like interesting boards. Maybe a bit low on memory. That
would make it difficult
On Thu, Jul 13, 2023 at 4:11 PM Karel Gardas
wrote:
>
> Folks,
>
> please take this patch as an attempt to renew old discussion or rather
> start a new one focused solely on importing new ARM CMSIS code which is
> (i) under Apache 2 license but (ii) without any NOTICE file.
>
The absence of a
Folks,
please take this patch as an attempt to renew old discussion or rather
start a new one focused solely on importing new ARM CMSIS code which is
(i) under Apache 2 license but (ii) without any NOTICE file.
I hope technical advantages are huge and there is no hinder involved
like with
Hello Amar,
github.com mirroring of RTEMS repositories is not working since March
23[1] of this year. This was reported several times IIRC on devel@ and
discord channels. Since this is already several months of outage, I
would like to ask you if you plan to make that working again or shall
Add information about the new i.MXRT1166 BSP. Rework some parts that
have been changed during or as preparation for that variant:
* The BSP now adapts to the Chip variant. It's no longer necessary to
overwrite the PLL settings in an application.
* Improve documentation on how to adapt to differ
The function returned a multiplexer value instead of the frequency.
---
bsps/arm/imxrt/mcux-sdk/drivers/qtmr_1/fsl_qtmr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/bsps/arm/imxrt/mcux-sdk/drivers/qtmr_1/fsl_qtmr.c
b/bsps/arm/imxrt/mcux-sdk/drivers/qtmr_1/fsl_qtmr.c
index
---
rtemsbsd/sys/arm/freescale/imx/imx_rtems_gpio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/rtemsbsd/sys/arm/freescale/imx/imx_rtems_gpio.c
b/rtemsbsd/sys/arm/freescale/imx/imx_rtems_gpio.c
index c24732cc..da64922f 100644
--- a/rtemsbsd/sys/arm/freescale/imx/imx_rt
The flash configuration is something very board specific. So move the
file to a board specific location. Beneath that, not all controllers and
configurations need the flash config right at the address 0 of the
flash. For example on the i.MXRT11xx, the config has an offset for some
flash types.
---
Useful for creating an application specific device tree that is based on
the evaluation board.
---
spec/build/bsps/arm/imxrt/bspimxrt1052.yml | 1 +
1 file changed, 1 insertion(+)
diff --git a/spec/build/bsps/arm/imxrt/bspimxrt1052.yml
b/spec/build/bsps/arm/imxrt/bspimxrt1052.yml
index ec218112a
The imx-gpio driver used in i.MX and i.MXRT BSPs generates a name based
on a fixed string. The original code only used one digit for the
controller. With the 13 GPIO controllers of the i.MXRT1166, that isn't
enough any more. This patch extends the name to two digits which should
be enough for the n
According to the reference manual the bits exist and they can be used.
Also confirmed by NXP support in the community forum:
https://community.nxp.com/t5/i-MX-RT/i-MXRT1160-LPSPI-HREQ-supported/m-p/1668647#M25512
---
.../devices/MIMXRT1166/MIMXRT1166_cm7.h | 25 +++
1 file c
Hello,
some weeks back, I mentioned that I want to add a new BSP variant to the
i.MXRT family. Now I have finally a version that is clean enough to
publish it. I'm sure that some more patches for further components will
follow (like USB). But the current version is stable and usable enough
to publ
On 2023-07-12 15:49, Sebastian Huber wrote:
v3:
* Restore previous behaviour of gptimer_tlib_reset().
* Use new IRQ(A)MP register block API also for
LEON_Enable_interrupt_broadcast() and
LEON_Disable_interrupt_broadcast().
* Add GRCAN - CanTxIRQ.
* Expand GRCLKGATE register bit fields.
13 matches
Mail list logo