Hi,
On Thursday 26 March 2015 05:36 AM, Arun Ramamurthy wrote:
On 15-03-25 05:01 PM, Kishon Vijay Abraham I wrote:
On Thursday 26 March 2015 04:12 AM, Dmitry Torokhov wrote:
Hi Kishon,
On Thu, Mar 26, 2015 at 03:58:50AM +0530, Kishon Vijay Abraham I wrote:
Hi,
On Saturday 21 March 2015
-Original Message-
From: Wood Scott-B07421
Sent: Tuesday, March 31, 2015 3:15 AM
To: Medve Emilian-EMMEDVE1
Cc: devicetree@vger.kernel.org; aflem...@gmail.com; linuxppc-
d...@lists.ozlabs.org; Liberman Igal-B31950
Subject: Re: [PATCH 1/3] powerpc/mpc85xx: Add FMan clock nodes
On
From: kongxinwei kong.kongxin...@hisilicon.com
This patch adds the support for hisilicon thermal sensor, within
hisilicon SoC. there will register sensors for thermal framework
and use device tree to bind cooling device.
Signed-off-by: Leo Yan leo@linaro.org
Signed-off-by: kongxinwei
From: kongxinwei kong.kongxin...@hisilicon.com
Thank you all for giving this v1 patches stages some comments. Here is v2
patches and address all the issues raised as part of v1 review.
The Linaro connect introduce 96boards series in Hong Kong,The HiKey board
is the first board to be certified
From: kongxinwei kong.kongxin...@hisilicon.com
This adds documentation of device tree bindings for the
thermal sensor controller of hi6220 SoC.
Signed-off-by: Leo Yan leo@linaro.org
Signed-off-by: kongxinwei kong.kongxin...@hisilicon.com
---
.../bindings/thermal/hisilicon-thermal.txt
On Mon, Mar 30, 2015 at 08:16:23PM -0700, Scott Branden wrote:
+Required properties:
+ - compatible : brcm,cygnus-audio
+ - #address-cells: 32bit valued, 1 cell. 1
+ - #size-cells: 32bit valued, 1 cell. 1
+ - reg : Should contain audio registers location and length
+ -
Add a device tree binding documentation to the watchdog hardware block on the
Conexant CX92755 SoC. The CX92755 is from the Digicolor SoCs series. Other SoCs
in that series may share the same hardware block.
Signed-off-by: Baruch Siach bar...@tkos.co.il
---
v3:
No change
v2:
No change
---
This commit add a driver for the watchdog functionality of the Conexant CX92755
SoC, from the Digicolor series of SoCs. Of 8 system timers provided by the
CX92755, the first one, timer A, can reset the chip when its counter reaches
zero. This driver uses this capability to provide userspace with a
This is Thermal Monitoring Unit for QorIQ platform.
Signed-off-by: Jia Hongtao hongtao@freescale.com
---
.../devicetree/bindings/thermal/qoriq-thermal.txt | 58 +++
arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi | 82 ++
Hi,
Thanks for the review.
On 03.02.2015 0:20, Stephen Warren wrote:
On 01/29/2015 12:20 AM, Andrey Danin wrote:
NVEC driver was reimplemented to use tegra i2c. Use common i2c bindings
for NVEC node.
diff --git a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
Javier Martinez Canillas wrote:
On Tue, Mar 31, 2015 at 6:05 AM, Chanwoo Choi cw00.c...@samsung.com wrote:
Hi,
On 03/31/2015 12:21 AM, Krzysztof Kozlowski wrote:
Use a define instead of raw number as a ID for rtc_src clock.
Signed-off-by: Krzysztof Kozlowski k.kozlow...@samsung.com
Hi,
On Saturday 28 March 2015 05:58 AM, Brian Norris wrote:
Hi Kishon,
On Thu, Mar 26, 2015 at 03:29:44AM +0530, Kishon Vijay Abraham I wrote:
On Thursday 19 March 2015 06:53 AM, Brian Norris wrote:
Supports up to two ports which can each be powered on/off and configured
independently.
On Tue, Mar 31, 2015 at 6:05 AM, Chanwoo Choi cw00.c...@samsung.com wrote:
Hi,
On 03/31/2015 12:21 AM, Krzysztof Kozlowski wrote:
Use a define instead of raw number as a ID for rtc_src clock.
Signed-off-by: Krzysztof Kozlowski k.kozlow...@samsung.com
---
Patch depends on new file
Javier Martinez Canillas wrote:
On Tue, Mar 31, 2015 at 1:38 AM, Chanwoo Choi cw00.c...@samsung.com wrote:
On 03/31/2015 12:19 AM, Krzysztof Kozlowski wrote:
Mark samsung,exynos3250-rtc compatible as deprecated because it
duplicates the samsung,s3c6410-rtc. Use samsung,s3c6410-rtc on
On Mon, Mar 30, 2015 at 08:16:24PM -0700, Scott Branden wrote:
The CC list for this patch is pretty wide - please look at who you're
sending this to and try to send to only relevant people (for example I'm
not sure the Raspberry Pi people need to review this). People working
upstream get a lot
On Tue, Mar 31, 2015 at 01:51:44AM +0300, Sergei Shtylyov wrote:
On 03/28/2015 11:28 AM, Richard Cochran wrote:
We also need SOB from Mitsuhiro and Masaru.
Hmm, it's the first time I encounter such requirement.
I think this is normal policy. I have seen it more than once on lkml.
The
On Tue, Mar 31, 2015 at 1:38 AM, Chanwoo Choi cw00.c...@samsung.com wrote:
On 03/31/2015 12:19 AM, Krzysztof Kozlowski wrote:
Mark samsung,exynos3250-rtc compatible as deprecated because it
duplicates the samsung,s3c6410-rtc. Use samsung,s3c6410-rtc on
Exynos3250 and Exynos4415 boards.
On Mon, Mar 30, 2015 at 08:16:22PM -0700, Scott Branden wrote:
The audio PLL is embedded in the audio block and only used
by the audio block. The audio PLL registers are also in the middle of
the audio register map.
When you say it's only used by the audio block do you mean to say that
the
Hello Alexandre,
On Tue, Mar 31, 2015 at 2:27 AM, Alexandre Belloni
alexandre.bell...@free-electrons.com wrote:
nitpick: I would prefer rtc: rtc-s3c instead of drivers/rtc/rtc-s3c.c
Yes but Krzysztof is following the convention used in drivers/rtc/
which I think is the correct thing to do even
Hi,
Now that miphy28lp phy is present upstream we can add sata DT nodes for
stih407 family silicon. As part of testing this I found a hang
with the current driver implmentation which does some register writes
before enabling the IP clock. Presumably on stih416 devices the sata
clock must have
On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
Hi Patrice, Maxime,
On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
Now there are generic phy type constants declared in phy.h, migrate over to
using them rather than defining our own. This change has been done as one
atomic commit
On 31/03/15 10:46, Robert Baldyga wrote:
IRQ handler touches info-edev, so if interrupt occurs before extcon
device initialization it can cause NULL pointer dereference. Doing extcon
initialization before IRQ handler registration fixes this problem.
Signed-off-by: Robert Baldyga
On Tue, 31 Mar 2015, Peter Griffin wrote:
On Tue, 31 Mar 2015, Lee Jones wrote:
On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
Hi Patrice, Maxime,
On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
Now there are generic phy type constants declared in phy.h, migrate over
Hi Jianwei,
The driver worked on a Vybrid VF610 device using the exported
framebuffer. However, when using X-Server through the DRM interface
directly (by using the modesetting driver) I get just a black screen so
far, still investigating the reason. What user-space interfaces did you
test?
When
2015-03-31 10:12 GMT+02:00 Alexandre Belloni
alexandre.bell...@free-electrons.com:
On 31/03/2015 at 09:47:15 +0900, Chanwoo Choi wrote :
Are you absolutely sure that the exynos3250 IP is the same as the
s3c6410 (I don't know much about the exynos family). The concern being
that if at one
Hi Sascha,
On Mon, 2015-03-30 at 19:23 +0200, Sascha Hauer wrote:
On Mon, Mar 30, 2015 at 04:14:12PM +0800, Eddie Huang wrote:
Hi Sascha,
[...]
+ if (i2c-speed_hz 40)
+ control_reg |= I2C_CONTROL_RS;
+ if (i2c-op == I2C_MASTER_WRRD)
Currently the ahci_st driver will hang the system on probe, as the
st_configure_oob function does some register writes before the IP
is clocked. This patch moves the function call to after
ahci_platform_enable_resources (which enables the IP clock), and
resolves the hang.
Addtionally
As part of testing ahci_st driver working on stih407 I noticed
several things wrong in the DT documentation: -
1) Compatible string doesn't match the driver code
2) pwr-rst reset isn't documented (but exists in the driver)
3) some whitespace issues (spaces not tabs)
Also add in a stih407 family
Now that the miphy28lp is upstream, we can add the sata dt nodes
for stih407 family silicon. This has been tested on b2120 board
J4 (sata0 channel). These nodes are disabled by default as a
special mini pci-e to sata daughter board is required which
isn't shipped with the board.
Signed-off-by:
IRQ handler touches info-edev, so if interrupt occurs before extcon
device initialization it can cause NULL pointer dereference. Doing extcon
initialization before IRQ handler registration fixes this problem.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
This patch adds VBUS pin detection support to extcon-usb-gpio driver.
It allows to use this driver with boards which have both VBUS and ID
pins, or only one of them.
Following table of states presents relationship between this signals
and detected cable type:
State|ID | VBUS
Hello,
This patch set modifies extcon-usb-gpio driver fixing bugs, and adds
new features - VBUS pin detection support and 'debounce' property in
devicetree node. It also updates documentation with information about
new features.
More detailed description of changes can be found in commit
Add information about VBUS pin detection support, 'debounce' property
and some other details.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
.../devicetree/bindings/extcon/extcon-usb-gpio.txt | 23 --
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git
This patch adds devicetree property for setting debounce value. It allows
to set debounce time shorter or longer depending on the needs of given
platform.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/extcon/extcon-usb-gpio.c | 14 +-
1 file changed, 9
This adds support for OMAP3 chips to ti-soc-thermal. As requested by
TI people, it is marked unreliable and warning is printed.
Signed-off-by: Pavel Machek pa...@ucw.cz
---
Patch is against thermal linus tree, please apply so that it has
chance for 4.1.
diff --git
On Tue, Mar 31, 2015 at 08:43:49AM +0200, Richard Cochran wrote:
I think this is normal policy. I have seen it more than once on lkml.
The reason for the author's SOB is to make sure that he or she is
really authorized (like from the employer) to contribute the driver.
Another issue is
On 31/03/2015 at 09:47:15 +0900, Chanwoo Choi wrote :
Are you absolutely sure that the exynos3250 IP is the same as the
s3c6410 (I don't know much about the exynos family). The concern being
that if at one point you have an errata on one or ther other, you will
have to break the DT ABI by
Hi,
On 31/03/2015 at 08:49:39 +0200, Javier Martinez Canillas wrote :
Hello Alexandre,
On Tue, Mar 31, 2015 at 2:27 AM, Alexandre Belloni
alexandre.bell...@free-electrons.com wrote:
nitpick: I would prefer rtc: rtc-s3c instead of drivers/rtc/rtc-s3c.c
Yes but Krzysztof is following
This patch adds nodes for the Goodix GT911 touchscreen controller found
on the Wexler TAB7200 tablet. Controller uses one of following I2C
addresses: 0x5d or 0x14, so just add two nodes.
Signed-off-by: Aleksei Mamlin mamli...@gmail.com
---
DT support for the Goodix GT911 touchscreen controller
Hi!
+io-channels = twl_madc 1,
+ twl_madc 10,
+ twl_madc 12;
+io-channel-names = temp,
+ ichg,
+ vbat;
+};
On 03/31/2015 05:16 AM, Scott Branden wrote:
[...]
+- ssp-port-id: The ssp port interface to use
+ Valid value are 0, 1, 2, or 3 (for spdif)
How about using 'reg' as the property name here. It is the standard property
name for identifying or assigning an address to a sub-node.
--
To
Hi Lee,
On Tue, 31 Mar 2015, Lee Jones wrote:
On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
Hi Patrice, Maxime,
On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
Now there are generic phy type constants declared in phy.h, migrate over to
using them rather than defining our
The patch adds a mismatch between the Kconfig symbol (a bool) and the
code (which suggests that a modular build is also possible).
On Mon, 2015-03-30 at 16:16 -0700, Andrew Bresticker wrote:
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
+config PINCTRL_PISTACHIO
+ def_bool
2015-03-31 10:20 GMT+02:00 Alexandre Belloni
alexandre.bell...@free-electrons.com:
Hi,
On 31/03/2015 at 08:49:39 +0200, Javier Martinez Canillas wrote :
Hello Alexandre,
On Tue, Mar 31, 2015 at 2:27 AM, Alexandre Belloni
alexandre.bell...@free-electrons.com wrote:
nitpick: I would prefer
Hi Bjorn,
pci-st.c driver could be modular with modification of pcie-designware
core driver. But as Fabrice said it should be another patchset.
What do you prefer ?
drop all the module related macros as mentioned by Paul ?
or
keep macros like other vendors do ?
Thanks
Gabriel
On 18 March
Hi Sakari,
On 03/31/2015 11:14 AM, sakari.ai...@iki.fi wrote:
Hi Mark and Jacek,
On Mon, Mar 30, 2015 at 02:20:03PM +0100, Mark Rutland wrote:
Hi,
+Optional properties:
+- maxim,trigger-type : Flash trigger type.
+ Possible trigger types:
+ LEDS_TRIG_TYPE_EDGE (0) -
Add optional DT properties to set open delay, sample delay and number
of averages per sample for each adc step. Open delay, sample delay
and averaging are some of the parameters that affect the sampling rate
and accuracy of the sample. Making these parameters configurable via
DT will help in
Hi,
This patch adds optional DT properties for tscadc to set open delay,
sample delay and number of averages per sample for each adc channel.
Open delay, sample delay and averaging are some of the parameters that
affect the sampling rate and accuracy of the tscadc. Decreasing delays
and
Refactor DT parsing into a separate function from probe() to
help addition of more DT parameters later.
No functional changes.
Signed-off-by: Vignesh R vigne...@ti.com
---
drivers/iio/adc/ti_am335x_adc.c | 29 +++--
1 file changed, 19 insertions(+), 10 deletions(-)
diff
Hi Marek,
On Sat, Mar 28, 2015 at 04:33:02PM +0100, Marek Vasut wrote:
On Friday, March 27, 2015 at 05:36:29 AM, Baruch Siach wrote:
Add a driver for the USB PHY on the Conexant CX92755 SoC, from the
Digicolor series of SoCs. The PHY is connected to the on-chip chipidea
usb2 host.
The
Hi Sascha,
On Tue, 2015-03-31 at 15:08 +0800, Eddie Huang wrote:
Hi Sascha,
On Mon, 2015-03-30 at 19:23 +0200, Sascha Hauer wrote:
On Mon, Mar 30, 2015 at 04:14:12PM +0800, Eddie Huang wrote:
Hi Sascha,
[...]
+ if (i2c-speed_hz 40)
+
Hi Mark and Jacek,
On Mon, Mar 30, 2015 at 02:20:03PM +0100, Mark Rutland wrote:
Hi,
+Optional properties:
+- maxim,trigger-type : Flash trigger type.
+Possible trigger types:
+LEDS_TRIG_TYPE_EDGE (0) - Rising edge of the signal
triggers
+
On 31/03/15 10:46, Robert Baldyga wrote:
Add information about VBUS pin detection support, 'debounce' property
and some other details.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
.../devicetree/bindings/extcon/extcon-usb-gpio.txt | 23
--
1 file changed,
Add compatible string definitions and supported pin functions.
Signed-off-by: Ivan T. Ivanov ivan.iva...@linaro.org
---
.../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt| 2 ++
.../devicetree/bindings/pinctrl/qcom,pmic-mpp.txt | 2 ++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
Hi Robert,
On 31/03/15 10:46, Robert Baldyga wrote:
This patch adds VBUS pin detection support to extcon-usb-gpio driver.
It allows to use this driver with boards which have both VBUS and ID
pins, or only one of them.
Following table of states presents relationship between this signals
and
On 31/03/15 10:46, Robert Baldyga wrote:
This patch adds devicetree property for setting debounce value. It allows
to set debounce time shorter or longer depending on the needs of given
platform.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/extcon/extcon-usb-gpio.c | 14
Hi Grant,
On Mar 30, 2015, at 22:04 , Grant Likely grant.lik...@secretlab.ca wrote:
On Thu, 22 Jan 2015 22:31:46 +0200
, Pantelis Antoniou pa...@antoniou-consulting.com
wrote:
Hi Joe,
On Jan 21, 2015, at 19:37 , Joe Perches j...@perches.com wrote:
On Wed, 2015-01-21 at 19:06 +0200,
Adds the i2c bus controller driver for the Ingenic JZ4780 SoC.
Signed-off-by: Zubair Lutfullah Kakakhel zubair.kakak...@imgtec.com
---
V2 - V3
Rebase to 4.0-rc6
checkpatch --strict fixes
Add compile_test
sparse fix for a cast warning
sort include/kconfig
reordered a while loop
dev_err - dev_dbg
Hi,
Here we have two patches that add support for the i2c
controller present in the Ingenic JZ4780.
Driver tested on the MIPS Creator CI20.
V2 - V3
Fixes based on feedback from Wolfram Sang. Thank-you.
Details in individual patch commit message
Rebased to v4.0-rc6
V1 - V2
Rebased to v4.0-rc3
Adds DT documentation for the the i2c controller for the JZ4780 SoC
Signed-off-by: Zubair Lutfullah Kakakhel zubair.kakak...@imgtec.com
---
V2 - V3
Rebase to v4.0-rc6
V1 - V2
Reworded example node. Was separated between board/soc.
No need for that as such.
Rebase to v4.0-rc3
---
Hi,
On Thu, Mar 26, 2015 at 03:53:40PM +0100, Hans de Goede wrote:
Hi All,
Here is v2 of my cleaned up version of Maxime's sunxi SRAM controller driver.
Changes since v1:
- Make the SUNXI_SRAM Kconfig option hidden, enabled by default if ARCH_SUNXI
- Fix some typos in the comments in the
Hi Hans,
On Sun, Mar 29, 2015 at 08:13:51PM +0200, Hans de Goede wrote:
Add a node for the chipone-icn8318 touchscreen found on the Utoo P66 tablet.
Signed-off-by: Hans de Goede hdego...@redhat.com
---
arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 22 ++
1 file changed,
On 17 March 2015 at 04:13, Chaotian Jing chaotian.j...@mediatek.com wrote:
Add Mediatek MMC driver code
Would be nice to get simple overview of what features the
driver/controller supports. Please add that to the commit message.
Signed-off-by: Chaotian Jing chaotian.j...@mediatek.com
---
Hi,
On Mon, Mar 30, 2015 at 10:50:52AM -0700, Tony Lindgren wrote:
* Jarkko Nikula jarkko.nik...@bitmer.com [150330 10:46]:
Well, there has been regression but finding exactly how far should the
fix go didn't look instantly straightforward due all DT, codec driver
mic bias etc changes and
Hi,
On 03/31/2015 12:20 PM, Roger Quadros wrote:
On 31/03/15 10:46, Robert Baldyga wrote:
Add information about VBUS pin detection support, 'debounce' property
and some other details.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
On 03/31/2015 11:30 AM, Roger Quadros wrote:
On 31/03/15 10:46, Robert Baldyga wrote:
This patch adds devicetree property for setting debounce value. It allows
to set debounce time shorter or longer depending on the needs of given
platform.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
Hi Sascha,
On Tue, 2015-03-31 at 19:52 +0200, Sascha Hauer wrote:
On Tue, Mar 31, 2015 at 07:50:58PM +0800, Eddie Huang wrote:
Hi Sascha,
On Tue, 2015-03-31 at 15:08 +0800, Eddie Huang wrote:
Hi Sascha,
speed = 40 here to make this more obvious?
There are two cases,
On Mon, Mar 23, 2015 at 02:32:07AM +, yoshihiro shimoda wrote:
+static void usb_dmac_chan_remove(struct usb_dmac_chan *uchan)
+{
+ tasklet_kill(uchan-task);
that part is good, but how about disabling irq? you can still get
insterrupt
Thank you for the point!
Hi Vinod,
+static void usb_dmac_chan_remove(struct usb_dmac_chan *uchan)
+{
+ tasklet_kill(uchan-task);
that part is good, but how about disabling irq? you can still get
insterrupt
Thank you for the point! I will add calling usb_dmac_chan_halt() to
On Wed, Mar 18, 2015 at 04:16:34PM +, Zubair Lutfullah Kakakhel wrote:
Hi,
Here we have three patches that add a DMA driver for the Ingenic JZ4780 SoC.
JZ4780 support is still in-flight.
These are based on 4.0-rc4.
Applied, thanks
Please ensure you use the right subsystem name in
This patch adds vendor prefix for Kinetic technologies
Signed-off-by: Ingi Kim ingi2@samsung.com
Acked-by: Rob Herring r...@kernel.org
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git
This patch adds the device tree bindings for ktd2692 flash LEDs.
Add optional properties 'flash-timeout-us' to control flash timeout
and 'vin-supply' for flash-led regulator
Signed-off-by: Ingi Kim ingi2@samsung.com
---
.../devicetree/bindings/leds/leds-ktd2692.txt | 32
This patch adds ktd2692 Flash LED driver with LED Flash class
Change in v5:
- Clean up the code
- Fix help message of Kconfig
- Fix issue related with regulator and mutex usage
- Remove tab spaces in bindings
Change in v4:
- Clean up the code
-
Quoting Jassi Brar (2015-03-02 02:28:44)
On 2 March 2015 at 15:48, Lee Jones lee.jo...@linaro.org wrote:
On Mon, 02 Mar 2015, Jassi Brar wrote:
On Mon, Mar 2, 2015 at 2:06 PM, Lee Jones lee.jo...@linaro.org wrote:
On Sat, 28 Feb 2015, Jassi Brar wrote:
On 28 February 2015 at 02:44,
Quoting Lee Jones (2015-03-02 00:16:06)
On Sat, 28 Feb 2015, Maxime Coquelin wrote:
Hi Lee,
On 02/27/2015 10:14 PM, Lee Jones wrote:
Lots of platforms contain clocks which if turned off would prove fatal.
The only way to recover from these catastrophic failures is to restart
the
On Wed, 2015-04-01 at 12:58 +0900, Ingi Kim wrote:
This patch adds a driver to support the ktd2692 flash LEDs.
ktd2692 can control flash current by ExpressWire interface.
trivia:
diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
[]
+static void
On Tue, 2015-03-31 at 21:52 -0700, Grant Likely wrote:
Thinking about this more, I'd like to suggest a different format that
gives us a nice hack on the name that makes it easy to remember:
'%pOF[...]'
'O' still means 'object', but it is also overloaded for Open Firmware.
That still
This patch adds a driver to support the ktd2692 flash LEDs.
ktd2692 can control flash current by ExpressWire interface.
Signed-off-by: Ingi Kim ingi2@samsung.com
---
drivers/leds/Kconfig| 9 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-ktd2692.c | 405
On Tue, Mar 17, 2015 at 12:46:12AM -0500, Andy Gross wrote:
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t
cookie,
+ struct dma_tx_state *txstate)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct virt_dma_desc *vd;
+ enum dma_status ret;
On Tue, 31 Mar 2015 13:03:05 +0300
, Pantelis Antoniou pantelis.anton...@konsulko.com
wrote:
+Device tree nodes:
+
+ %pOn[fnpPcCFr]
+
+ For printing device tree nodes. The optional arguments are:
+ f device node full_name
+ n device node name
+ p device node
On Mon, Mar 30, 2015 at 04:16:53PM -0700, Andrew Bresticker wrote:
This series adds support for the system pin and GPIO controller on the IMG
Pistachio SoC. Pistachio's system pin controller manages 99 pins, 90 of
which are MFIOs which can be muxed between multiple functions or used
as
On 03/30/2015 11:14 PM, Baruch Siach wrote:
Add a device tree binding documentation to the watchdog hardware block on the
Conexant CX92755 SoC. The CX92755 is from the Digicolor SoCs series. Other SoCs
in that series may share the same hardware block.
Signed-off-by: Baruch Siach
Hi,
On Tuesday 31 March 2015 05:04 PM, Baruch Siach wrote:
Hi Marek,
On Sat, Mar 28, 2015 at 04:33:02PM +0100, Marek Vasut wrote:
On Friday, March 27, 2015 at 05:36:29 AM, Baruch Siach wrote:
Add a driver for the USB PHY on the Conexant CX92755 SoC, from the
Digicolor series of SoCs. The PHY
On 03/27/2015 10:22 PM, Russell King - ARM Linux wrote:
On Fri, Mar 27, 2015 at 02:26:52PM +0200, Peter Ujfalusi wrote:
Do not direct map the virtual channels to sDMA request number. When the
sDMA is behind of a crossbar this direct mapping can cause situations when
certain channel can not be
This patch adds documentation for a pinctrl-names property.
The property, when present, is used for switching the source
of the strobe signal for the device.
Signed-off-by: Jacek Anaszewski j.anaszew...@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Bryan Wu coolo...@gmail.com
From: Wolfram Sang wsa+rene...@sang-engineering.com
I wanted to disable a node via OF_DYNAMIC by setting its status to disabled.
This code is the minimal testcase, the same happens in a more complex scenario.
There is something wrong with freeing resources. Is my module wrong? Or is it a
bug?
Hi Tejun,
On Tue, 31 Mar 2015, Tejun Heo wrote:
On Tue, Mar 31, 2015 at 08:35:09AM +0100, Peter Griffin wrote:
Currently the ahci_st driver will hang the system on probe, as the
st_configure_oob function does some register writes before the IP
is clocked. This patch moves the function
Hi,
On Tuesday 31 March 2015 09:11 PM, Baruch Siach wrote:
Hi Kishon,
On Tue, Mar 31, 2015 at 08:56:54PM +0530, Kishon Vijay Abraham I wrote:
On Tuesday 31 March 2015 05:04 PM, Baruch Siach wrote:
On Sat, Mar 28, 2015 at 04:33:02PM +0100, Marek Vasut wrote:
On Friday, March 27, 2015 at
On 31.03.2015 17:09, Stephen Warren wrote:
On 03/31/2015 12:40 AM, Andrey Danin wrote:
Hi,
Thanks for the review.
On 03.02.2015 0:20, Stephen Warren wrote:
On 01/29/2015 12:20 AM, Andrey Danin wrote:
NVEC driver was reimplemented to use tegra i2c. Use common i2c bindings
for NVEC node.
Hello.
On 03/31/2015 03:21 AM, Simon Horman wrote:
Define the generic R8A7790 part of the EtherAVB device node.
Please repost once this binding (and associated driver) has been accepted.
OK, but will you merge patch #1?
Based on original patch by Mitsuhiro Kimura
On 03/30/2015 11:14 PM, Baruch Siach wrote:
This commit add a driver for the watchdog functionality of the Conexant CX92755
SoC, from the Digicolor series of SoCs. Of 8 system timers provided by the
CX92755, the first one, timer A, can reset the chip when its counter reaches
zero. This driver
Hello Tejun,
On 03/31/2015 05:29 PM, Tejun Heo wrote:
On Tue, Mar 31, 2015 at 08:35:09AM +0100, Peter Griffin wrote:
Currently the ahci_st driver will hang the system on probe, as the
st_configure_oob function does some register writes before the IP
is clocked. This patch moves the function
Maxime,
On Tuesday 31 March 2015 01:10 PM, Lee Jones wrote:
On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
Hi Patrice, Maxime,
On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
Now there are generic phy type constants declared in phy.h, migrate over to
using them rather than
From: Richard Cochran richardcoch...@gmail.com
Date: Tue, 31 Mar 2015 08:43:49 +0200
On Tue, Mar 31, 2015 at 01:51:44AM +0300, Sergei Shtylyov wrote:
On 03/28/2015 11:28 AM, Richard Cochran wrote:
We also need SOB from Mitsuhiro and Masaru.
Hmm, it's the first time I encounter such
I've just pushed PATCH v5 - it adds more precise description
of current settings constraints.
On 03/31/2015 03:52 PM, Jacek Anaszewski wrote:
This patch adds device tree binding documentation for
the flash cell of the Maxim max77693 multifunctional device.
Signed-off-by: Jacek Anaszewski
This patch adds device tree binding documentation for
the flash cell of the Maxim max77693 multifunctional device.
Signed-off-by: Jacek Anaszewski j.anaszew...@samsung.com
Signed-off-by: Andrzej Hajda a.ha...@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Lee Jones
Use skyworks as the vendor prefix for the Skyworks Solutions, Inc.
Signed-off-by: Jacek Anaszewski j.anaszew...@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: devicetree@vger.kernel.org
---
.../devicetree/bindings/vendor-prefixes.txt|1 +
1 file changed, 1
This patch adds device tree binding documentation for
1.5A Step-Up Current Regulator for Flash LEDs.
Signed-off-by: Jacek Anaszewski j.anaszew...@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Bryan Wu coolo...@gmail.com
Cc: Richard Purdie rpur...@rpsys.net
Cc:
Hello.
On 3/29/2015 9:09 PM, Hans de Goede wrote:
The eMMC on the A13 based Utoo-P66 tablet does not properly support hpi,
and trying to enable it results in the eMMC not working, so add a child-node
describing the eMMC, and set the broken-hpi property on it.
Signed-off-by: Hans de Goede
On 17 March 2015 at 04:13, Chaotian Jing chaotian.j...@mediatek.com wrote:
Add PM support for Mediatek MMC driver
Signed-off-by: Chaotian Jing chaotian.j...@mediatek.com
---
drivers/mmc/host/mtk-sd.c | 94
++-
1 file changed, 93 insertions(+), 1
1 - 100 of 161 matches
Mail list logo