Sergei Shtylyov sergei.shtyl...@cogentembedded.com writes:
Sigh. ePAPR standardizes the usb name for such nodes.
[...]
Indeed.
I'll send the v3 tomorrow.
Cheers.
--
Robert
--
To unsubscribe from this list: send the line unsubscribe devicetree in
Hi Rob,
-Original Message-
From: Rob Herring [mailto:robherri...@gmail.com]
Sent: Friday, June 19, 2015 11:48 AM
To: Ilya Faenson
Cc: mar...@holtmann.org; Arend Van Spriel; devicetree@vger.kernel.org;
linux-blueto...@vger.kernel.org
Subject: Re: FW: [PATCH v4 1/4] Broadcom Bluetooth
Hi Cyrille,
On Fri, Jun 19, 2015 at 10:49:35AM +0200, Cyrille Pitchen wrote:
+
+ clk_prepare_enable(clk);
I believe you need to have error handling here, not because it will
actually fail but to handle deferrals.
+ version = readl(map + FX_VERSION);
+ writel(mr, map + FX_MR);
+
* Add iMX7D SoC imx7d-pinfunc gpio pad settings
mux_reg conf_reg input_reg mux_mode input_val
* iMX7D GPIO1_IO7 to GPIO1_IO0 encode the pad group id in the most
significant bits of input_val to avoid group id overlap bweeten
iomuxc and iomuxc-lpsr.
Signed-off-by: Adrian Alonso
+ tglx, Kevin
On Thu, Jun 18, 2015 at 08:20:52PM -0700, Gregory Fong wrote:
On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris computersforpe...@gmail.com
wrote:
This patch set introduces system suspend/resume support for Broadcom STB
SoCs.
There are two suspend modes (S2 and S3) as well as
* Add imx7d SoC iomuxc-lpsr gpio group id's
* Add IOMUXC_LPSR_SUPPORT flag for pinctrl-imx driver to
support iomuxc-lpsr controller.
Signed-off-by: Adrian Alonso aalo...@freescale.com
---
drivers/pinctrl/freescale/pinctrl-imx7d.c | 17 +
1 file changed, 17 insertions(+)
diff
On Fri, Jun 19, 2015 at 3:41 PM, Brian Norris
computersforpe...@gmail.com wrote:
+ tglx, Kevin
^^ for real this time
On Thu, Jun 18, 2015 at 08:20:52PM -0700, Gregory Fong wrote:
On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris computersforpe...@gmail.com
wrote:
This patch set introduces
* Add iMX7D SoC imx7d-pinfunc gpio pad settings
mux_reg conf_reg input_reg mux_mode input_val
* iMX7D GPIO1_IO7 to GPIO1_IO0 encode the pad group id in the most
significant bits of input_val to avoid group id overlap bweeten
iomuxc and iomuxc-lpsr.
Signed-off-by: Adrian Alonso
* Extend pinctrl-imx driver to support iomux lpsr conntroller,
* iMX7D has two iomuxc controllers, iomuxc controller similar as
previous iMX SoC generation and iomuxc-lpsr which provides
low power state rentetion capabilities on gpios that are part of
iomuxc-lpsr (GPIO1_IO7..GPIO1_IO0).
*
* Add iomuxc lpsr register base address to extend
pinctrl-imx driver to support the iomux settings for pins
that support LPSR operation mode.
Signed-off-by: Adrian Alonso aalo...@freescale.com
---
arch/arm/boot/dts/imx7d.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
On Fri, Jun 19, 2015 at 2:59 PM, Adrian Alonso aalo...@freescale.com wrote:
* Extend pinctrl-imx driver to support iomux lpsr conntroller,
* iMX7D has two iomuxc controllers, iomuxc controller similar as
previous iMX SoC generation and iomuxc-lpsr which provides
low power state rentetion
Hi,
On 18/06/2015 at 00:28:06 +0530, Vaibhav Hiremath wrote :
- pdata = dev_get_platdata(pdev-dev);
- if (pdata == NULL)
- dev_warn(pdev-dev, No platform data!\n);
+ if (!pdata !node) {
+ dev_err(pdev-dev,
+ pm80x-rtc requires
On 19-06-15, 13:52, Rob Herring wrote:
On Fri, Jun 19, 2015 at 1:47 PM, Stephen Boyd sb...@codeaurora.org wrote:
But isn't this being removed? If it is removed, feel free to add
Sigh..
Reviewed-by: Stephen Boyd sb...@codeaurora.org
Acked-by: Rob Herring r...@kernel.org
Thanks. And here is
On 19-06-15, 11:44, Stephen Boyd wrote:
On 06/18, Viresh Kumar wrote:
The problem you stated now was there with the current state of
bindings. The name is embedded into the OPP table node and so is fixed
for all the CPUs. Moving it to the CPU node will give all CPUs a
chance to name it
On Wed, Jun 17, 2015 at 11:51 PM, Jacek Anaszewski
j.anaszew...@samsung.com wrote:
Hi Matt,
On 06/18/2015 05:58 AM, Matt Ranostay wrote:
Several cap11xx variants have LEDs that be can be controlled, this
patchset implements this functionality.
Signed-off-by: Matt Ranostay
On Thu, Jun 18, 2015 at 03:46:20PM +0200, Boris Brezillon wrote:
+ dram = mv_mbus_dram_info_nooverlap();
This doesn't compile because it hasn't made it into mainline yet.
I'm afraid this patch-set will have to wait until that happens.
Cheers,
--
Email: Herbert Xu
On Thu, 2015-06-18 at 15:05 +0200, Cyrille Pitchen wrote:
--- /dev/null
+++ b/drivers/mfd/atmel-flexcom.c
+MODULE_ALIAS(platform:atmel_flexcom);
(The day before yesterday and yesterday I had a, well, lively
conversation regarding this macro. The interesting bits start at
On Fri, Jun 12, 2015 at 04:43:19PM +0800, Yi Zhang wrote:
Hi, Samuel and Lee:
Could you please share your comments on this patch?
then I can modify accordingly;
thanks very much;
- 88pm880 and 88pm886 are PMIC chips which integrates regulator,
gpadc, charger, fuelgauge, etc;
The commit dd11444327ce (spi: dw-spi: Convert 16bit accesses to 32bit
accesses) globally changed all register access in the dw_apb_ssi driver
to 32 bit access, which breaks data register (FIFO) access on picoXcell
platforms.
This series introduces a boolean to the core spi-dw driver to indicate
The commit dd11444327ce (spi: dw-spi: Convert 16bit accesses to 32bit
accesses) changed all 16bit accesses in the DW_apb_ssi driver to 32bit.
This, unfortunately, breaks data register access on picoXcell, where the
DW IP needs data register accesses to be word accesses (all other
accesses appear
This change documents a new property for the snps,dw-apb-ssi device,
allowing an implementer to interact with the SPI controller data
register in 16 bit mode only. This supports a change that unbreaks
this driver on picoXcell platforms.
Signed-off-by: Michael van der Westhuizen
On Fri, Jun 19, 2015 at 10:40:15AM +0200, Gregory CLEMENT wrote:
For this option you can use the branch mvebu/drivers located at
git://git.infradead.org/linux-mvebu.git.
In this branch there is the commit bus: mvebu-mbus: add
mv_mbus_dram_info_nooverlap()
but not only this one because
The detecting flag really refers to the microphone detection stage and
as such should be cleared before arizona_identify_headphones is called.
Also the mic flag should be set before identify headphones is called as
well.
Otherwise the microphone detection will not be disabled during the
headphone
This patch adds bindings for the basic microphone detection platform
data.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 30 ++
include/linux/mfd/arizona/pdata.h |3 +++
2 files changed, 33
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
Documentation/devicetree/bindings/mfd/arizona.txt | 16
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt
On Fri, Jun 19, 2015 at 7:44 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 07:31:49PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 6:08 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 05:28:11PM +0900, Chanwoo
Am Donnerstag, 18. Juni 2015, 18:15:03 schrieb Heiko Stuebner:
Am Donnerstag, 18. Juni 2015, 13:29:11 schrieb Eddie Huang:
Add clk_null, which represents clocks that can not / need not
controlled by software.
There are many clocks' parent set to clk_null.
Devicetree is supposed to
On Fri, Jun 19, 2015 at 08:03:37PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 7:44 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 07:31:49PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 6:08 PM, Charles Keepax
Hi ,
On Fri, Jun 19, 2015 at 5:30 PM, Suman Tripathi stripa...@apm.com wrote:
This patch disables the 1.8V signaling for arasan 4.9a version
of SDHCI controller with the help SDHCI_QUIRK2_NO_1_8_V quirk.
Signed-off-by: Suman Tripathi stripa...@apm.com
---
---
This series adds basic microphone detection DT/ACPI bindings
using the device properties API.
The MFD parts and the extcon parts can go seperately through
there respective trees, but I sent them together so everyone
can see what is going on. There is no build dependency
although the MFD patch
Currently micd_dbtime can be set to 0 for default, 1 for 4 measurements,
or a greater than 16-bit value for 2 measurements. This patch simplifies
the symantics to 2 for 2 measurements, 4 for 4 measurements and any
other value for the default.
I am not super keen on changing the symantics of the
This patch adds bindings for the basic microphone detection platform
data.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 18 ++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c |4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 1fbe3b4..c4d179b 100644
---
The device properties API will load data from both device tree and ACPI,
update the binding to use this API instead of the OF API.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 11 +--
1 files changed, 5 insertions(+), 6
On Fri, Jun 19, 2015 at 07:31:49PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 6:08 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 05:28:11PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 5:17 PM, Charles Keepax
On 19/06/15 11:36, maitysancha...@gmail.com wrote:
Hello Srinivas,
On 15-05-21 17:44:12, Srinivas Kandagatla wrote:
This patch adds bindings for simple nvmem framework which allows nvmem
consumers to talk to nvmem providers to get access to nvmem cell data.
Signed-off-by: Maxime Ripard
The detecting flag really refers to the microphone detection stage and
as such should be cleared before arizona_identify_headphones is called.
Also the mic flag should be set before identify headphones is called as
well.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
Documentation/devicetree/bindings/mfd/arizona.txt | 16
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt
Convert to using the newer gpiod interface for the micd_pol_gpio.
Although we still carry support for the old gpio interface from pdata.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 41 ++
1 files
Hello Srinivas,
On 15-05-21 17:44:12, Srinivas Kandagatla wrote:
This patch adds bindings for simple nvmem framework which allows nvmem
consumers to talk to nvmem providers to get access to nvmem cell data.
Signed-off-by: Maxime Ripard maxime.rip...@free-electrons.com
[Maxime Ripard: intial
Device tree and ACPI primarily deal with unsigned ints, many of the
pdata members in the Arizona driver are signed ints but are only ever
assigned positive values. Changing these pdata fields to unsigned ints
avoids us having to choose between overly verbose code and Sparse
warnings.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c |4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 9262b45..e31613a 100644
---
Convert to using the newer gpiod interface for the micd_pol_gpio.
Although we still carry support for the old gpio interface from pdata.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 41 ++
1 files
The device properties API will load data from both device tree and ACPI,
update the binding to use this API instead of the OF API.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 11 +--
1 files changed, 5 insertions(+), 6
This series adds basic microphone detection DT/ACPI bindings
using the device properties API.
The MFD parts and the extcon parts can go seperately through
there respective trees, but I sent them together so everyone
can see what is going on. There is no build dependency
although the MFD patch
This patch adds the SDHCI support for APM X-Gene SoC using ARASAN SDHCI
controller.
v1 change:
* Use the CONFIG_ARM64_DMA_HAS_IOMMU for dma-mapping.
v2 change:
* Drop the IOMMU support and switching to PIO mode for arasan.
controller integrated inside APM X-Gene SoC.
v3 change:
* Change
This patch adds the arasan mmc nodes to reuse the of-arasan
driver for APM X-Gene SoC.
Signed-off-by: Suman Tripathi stripa...@apm.com
---
---
arch/arm64/boot/dts/apm/apm-mustang.dts | 4 +++
arch/arm64/boot/dts/apm/apm-storm.dtsi | 43 +
2 files changed, 47
This patch disables the 1.8V signaling for arasan 4.9a version
of SDHCI controller with the help SDHCI_QUIRK2_NO_1_8_V quirk.
Signed-off-by: Suman Tripathi stripa...@apm.com
---
---
drivers/mmc/host/sdhci-of-arasan.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
Hi Alexey,
On 06/18/2015 07:45 PM, Alexey Klimov wrote:
Hi Jacek,
On Mon, May 25, 2015 at 6:13 PM, Jacek Anaszewski
j.anaszew...@samsung.com wrote:
This patch adds helper functions for registering/unregistering
LED Flash class devices as V4L2 sub-devices. The functions should
be called from
Hi Thomas, Herbert,
On 19/06/2015 10:24, Thomas Petazzoni wrote:
Hello Herbert,
On Fri, 19 Jun 2015 14:42:56 +0800, Herbert Xu wrote:
On Thu, Jun 18, 2015 at 03:46:20PM +0200, Boris Brezillon wrote:
+ dram = mv_mbus_dram_info_nooverlap();
This doesn't compile because it hasn't made it
This driver supports the new Atmel Flexcom. The Flexcom is a wrapper which
integrates one SPI controller, one I2C controller and one USART. Only one
function can be enabled at a time. This driver selects the function once
for all, when the Flexcom is probed, according to the value of the new
On Fri, Jun 19, 2015 at 05:28:11PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 5:17 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 11:25:57AM +0900, Chanwoo Choi wrote:
Hi Charles,
On Thu, Jun 18, 2015 at 11:43 PM, Charles Keepax
On Fri, Jun 19, 2015 at 05:39:22PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 5:14 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 11:36:47AM +0900, Chanwoo Choi wrote:
Hi Charles,
On Thu, Jun 18, 2015 at 11:43 PM, Charles Keepax
On Fri, Jun 19, 2015 at 6:08 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 05:28:11PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 5:17 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 11:25:57AM +0900, Chanwoo
On Fri, Jun 19, 2015 at 11:36:47AM +0900, Chanwoo Choi wrote:
Hi Charles,
On Thu, Jun 18, 2015 at 11:43 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
Convert to using the newer gpiod interface for the micd_pol_gpio.
Although we still carry support for the old gpio
On Fri, Jun 19, 2015 at 11:25:57AM +0900, Chanwoo Choi wrote:
Hi Charles,
On Thu, Jun 18, 2015 at 11:43 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
This patch adds bindings for the basic microphone detection platform
data.
Signed-off-by: Charles Keepax
On Fri, Jun 19, 2015 at 6:13 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 05:39:22PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 5:14 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 11:36:47AM +0900, Chanwoo
Hello Herbert,
On Fri, 19 Jun 2015 14:42:56 +0800, Herbert Xu wrote:
On Thu, Jun 18, 2015 at 03:46:20PM +0200, Boris Brezillon wrote:
+ dram = mv_mbus_dram_info_nooverlap();
This doesn't compile because it hasn't made it into mainline yet.
I'm afraid this patch-set will have to wait
On Fri, Jun 19, 2015 at 5:17 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 11:25:57AM +0900, Chanwoo Choi wrote:
Hi Charles,
On Thu, Jun 18, 2015 at 11:43 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
This patch adds bindings for the
ChangeLog
v3:
- remove MODULE_ALIAS()
- add Acked-by from Boris Brezillon and Alexandre Belloni
v2:
- enhance the documentation of DT bindings and change the way the ranges
property is used.
- replace __raw_readl() and __raw_writel() by readl() and writel().
- change the module license to GPL
Signed-off-by: Cyrille Pitchen cyrille.pitc...@atmel.com
Acked-by: Boris Brezillon boris.brezil...@free-electrons.com
Acked-by: Alexandre Belloni alexandre.bell...@free-electrons.com
---
.../devicetree/bindings/mfd/atmel-flexcom.txt | 58 ++
1 file changed, 58
On Fri, Jun 19, 2015 at 5:14 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 11:36:47AM +0900, Chanwoo Choi wrote:
Hi Charles,
On Thu, Jun 18, 2015 at 11:43 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
Convert to using the newer gpiod
On Fri, Jun 19, 2015 at 06:50:03PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 6:13 PM, Charles Keepax
ckee...@opensource.wolfsonmicro.com wrote:
On Fri, Jun 19, 2015 at 05:39:22PM +0900, Chanwoo Choi wrote:
On Fri, Jun 19, 2015 at 5:14 PM, Charles Keepax
From: Frank Li frank...@freescale.com
Add imx6ul support
Signed-off-by: Anson Huang b20...@freescale.com
Signed-off-by: Bai Ping b51...@freescale.com
Signed-off-by: Fugang Duan b38...@freescale.com
Signed-off-by: Frank Li frank...@freescale.com
---
drivers/clk/imx/Makefile | 1
On Thu, Jun 18, 2015 at 3:37 PM, Ilya Faenson ifaen...@broadcom.com wrote:
Hi Rob.
-Original Message-
From: linux-bluetooth-ow...@vger.kernel.org
[mailto:linux-bluetooth-ow...@vger.kernel.org] On Behalf Of Rob Herring
Sent: Thursday, June 18, 2015 3:41 PM
To: Ilya Faenson
Cc:
From: Frank Li frank...@freescale.com
Add new SOC i.MX6UL dtb file support, including evk board
support
i.MX6 Ultralite processor include one ARM cortext-A7 core.
Offer high perfomance and lowest power consumption.
Main included:
- 4 MMC/SD/SDIO
- 2 USB 2.0 OTG
- 3 I2S/SAI/AC97
- 4 eCSPI
- 4
From: Frank Li frank...@freescale.com
add pin mux define file
Signed-off-by: Bai Ping b51...@freescale.com
Signed-off-by: Anson Huang b20...@freescale.com
Signed-off-by: Frank Li frank...@freescale.com
---
arch/arm/boot/dts/imx6ul-pinfunc.h | 938 +
1 file
From: Frank Li frank...@freescale.com
This part just add necessary change to boot imx6ul.
Update clock and pinctrl for imx6ul
Signed-off-by: Frank Li frank...@freescale.com
Signed-off-by: Frank Li frank...@freescale.com
---
.../devicetree/bindings/clock/imx6ul-clock.txt | 13
From: Frank Li frank...@freescale.com
i.MX6UL is a new SOC, add MSL support
Signed-off-by: Frank Li frank...@freescale.com
---
arch/arm/mach-imx/Kconfig | 8
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/mach-imx6ul.c | 43 +
3
From: Frank Li frank...@freescale.com
Add i.MX6UL pinctrl driver support.
Signed-off-by: Anson Huang b20...@freescale.com
Signed-off-by: Frank Li frank...@freescale.com
---
drivers/pinctrl/freescale/Kconfig | 7 +
drivers/pinctrl/freescale/Makefile | 1 +
From: Frank Li frank...@freescale.com
Add basic function support i.mx6ul.
add simple dts.
add full pin function define
add clock support.
add low level debug
Change from v1 to v2:
- Remove unnecessary clk_register_clkdev for gpt
- use fat iomux in dts
- use macro GPIO_ACTIVE_LOW
Anson Huang
From: Frank Li frank...@freescale.com
default enable imx6ul support
Signed-off-by: Frank Li frank...@freescale.com
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig
b/arch/arm/configs/imx_v6_v7_defconfig
index
From: Anson Huang b20...@freescale.com
Enable low-level debug support for i.MX6UL by adding the
debug port definitions for the SoC.
Singed-off-by: Anson Huang b20...@freescale.com
Signed-off-by: Fugang Duan b38...@freescale.com
Signed-off-by: Frank Li frank...@freescale.com
---
On Thu, Jun 18, 2015 at 03:46:16PM +0200, Boris Brezillon wrote:
Hello,
This patch series adds a new driver supporting Marvell's CESA IP.
This driver addresses some limitations of the existing one.
From a performance and CPU load point of view the most important
limitation in the existing
Currently micd_dbtime can be set to 0 for default, 1 for 4 measurements,
or a greater than 16-bit value for 2 measurements. This patch simplifies
the symantics to 2 for 2 measurements, 4 for 4 measurements and any
other value for the default.
I am not super keen on changing the symantics of the
The device properties API will load data from both device tree and ACPI,
update the binding to use this API instead of the OF API.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 11 +--
1 files changed, 5 insertions(+), 6
The detecting flag really refers to the microphone detection stage and
as such should be cleared before arizona_identify_headphones is called.
Also the mic flag should be set before identify headphones is called as
well.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
On Thu, 2015-06-18 at 17:06 +0100, Adam Thomson wrote:
--- /dev/null
+++ b/drivers/power/da9150-fg.c
+/* Register external function to give battery temperature */
+void da9150_fg_register_temp_cb(struct power_supply *psy, da9150_read_temp_t
cb,
+ void
On 06/19/15 17:47, Rob Herring wrote:
On Thu, Jun 18, 2015 at 3:37 PM, Ilya Faensonifaen...@broadcom.com wrote:
Hi Rob.
-Original Message-
From: linux-bluetooth-ow...@vger.kernel.org
[mailto:linux-bluetooth-ow...@vger.kernel.org] On Behalf Of Rob Herring
Sent: Thursday, June 18, 2015
This series adds basic microphone detection DT/ACPI bindings
using the device properties API.
The MFD parts and the extcon parts can go seperately through
there respective trees, but I sent them together so everyone
can see what is going on. There is no build dependency
although the MFD patch
Convert to using the newer gpiod interface for the micd_pol_gpio.
Although we still carry support for the old gpio interface from pdata.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 41 ++
1 files
This patch adds bindings for the basic microphone detection platform
data.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
drivers/extcon/extcon-arizona.c | 18 ++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git
Device tree and ACPI primarily deal with unsigned ints, many of the
pdata members in the Arizona driver are signed ints but are only ever
assigned positive values. Changing these pdata fields to unsigned ints
avoids us having to choose between overly verbose code and Sparse
warnings.
Signed-off-by: Charles Keepax ckee...@opensource.wolfsonmicro.com
---
Documentation/devicetree/bindings/mfd/arizona.txt | 16
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt
On Fri, Jun 19, 2015 at 11:43 AM, Nicolae Rosia nicolae.ro...@gmail.com wrote:
Hi,
I can't seem to find a datasheet for this series.
Have not public yet.
best regards
Frank Li
Best regards,
Nicolae Rosia
On Fri, Jun 19, 2015 at 6:32 PM, frank...@freescale.com wrote:
From: Frank Li
Hi,
On Fri, Jun 19, 2015 at 6:32 PM, frank...@freescale.com wrote:
From: Frank Li frank...@freescale.com
[...]
+ cpus {
+ #address-cells = 1;
+ #size-cells = 0;
+
+ cpu0: cpu@0 {
+ compatible = arm,cortex-a7;
+
Hi,
I can't seem to find a datasheet for this series.
Best regards,
Nicolae Rosia
On Fri, Jun 19, 2015 at 6:32 PM, frank...@freescale.com wrote:
From: Frank Li frank...@freescale.com
Add basic function support i.mx6ul.
add simple dts.
add full pin function define
add clock support.
add
On Thu, 2015-06-18 at 17:06 +0100, Adam Thomson wrote:
--- /dev/null
+++ b/include/linux/mfd/da9150/fg.h
+/*
+ * Function template to provide battery temperature. Should provide
+ * 0.1 degrees C resolution return values.
+ */
+typedef int (*da9150_read_temp_t)(void *context);
+
+/*
The Plumbers conference has officially filled up and
closed registration BUT I might be able to get one or
two more people into the conference.
If you think that your presence will provide a positive
contribution to the device tree track, please email me
by Monday afternoon (California time, PDT,
On Thu, Jun 18, 2015 at 07:20:26PM -0700, Gregory Fong wrote:
On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris
computersforpe...@gmail.com wrote:
Useful for waking the system from suspend after a specified period of
time.
This IP could potentially be supported as an RTC driver (for use with
On 06/18, Viresh Kumar wrote:
On 17-06-15, 18:30, Stephen Boyd wrote:
An operating-point(s?)-names property seems ok... but doesn't that mean
that every CPU that uses the OPP has to have the same list of
operating-point-names?
Why do you think so? For me the operating-points-v2-names
Hello.
On 06/19/2015 09:38 PM, Robert Jarzmik wrote:
Add the usb host controller to pxa27x and pxa3xx.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
arch/arm/boot/dts/pxa27x.dtsi | 8
arch/arm/boot/dts/pxa3xx.dtsi | 8
2 files changed, 16 insertions(+)
Add the correct address and size to the device-tree description.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
arch/arm/boot/dts/pxa27x.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 1402e23..fc79df9
Add the 3 possible mmc controllers on pxa3xx SoCs to the devicetree
description. Add the dma and clocks to the device-tree description of
pxa27x and pxa3xx at the same time.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
arch/arm/boot/dts/pxa2xx.dtsi | 4
The pxa27x SoCs have an embedded camera host controller. Add the
description to the family description.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
Since v1: Sergey's comment on ePAR standard: imaging
---
arch/arm/boot/dts/pxa27x.dtsi | 17 +
1 file changed, 17
On 06/19/15 20:49, Rob Herring wrote:
On Fri, Jun 19, 2015 at 12:06 PM, Arend van Sprielar...@broadcom.com wrote:
On 06/19/15 17:47, Rob Herring wrote:
On Thu, Jun 18, 2015 at 3:37 PM, Ilya Faensonifaen...@broadcom.com
wrote:
Hi Rob.
-Original Message-
From:
Add the SoC embedded DMA controller, shared with the mmp architecture.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
arch/arm/boot/dts/pxa27x.dtsi | 9 +
arch/arm/boot/dts/pxa3xx.dtsi | 9 +
2 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/pxa27x.dtsi
Add the usb host controller to pxa27x and pxa3xx.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
arch/arm/boot/dts/pxa27x.dtsi | 8
arch/arm/boot/dts/pxa3xx.dtsi | 8
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/pxa27x.dtsi
Add the dma client description for pxa3xx-nand to use its dma through
device-tree.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
arch/arm/boot/dts/pxa3xx.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index
On 06/18, Viresh Kumar wrote:
On 18-06-15, 07:55, Viresh Kumar wrote:
Why do you think so? For me the operating-points-v2-names property
will be present in CPU node (as there is no OPP node which can have
it) and so every CPU is free to choose what it wants to.
So, I had something like
1 - 100 of 103 matches
Mail list logo
