Re: [PATCH v2 0/3] USB: add generic onboard USB HUB driver

Hi Fabio, Hi Peter, On 16.12.2015 11:11, Fabio Estevam wrote: > Hi Peter, > > On Wed, Dec 16, 2015 at 2:11 AM, Peter Chen wrote: > >> Thanks, Fabio, but I am curious how things like that? The USBOH3 clock >> is not opened, the usb driver will hang when it tries to

[PATCH v3] net/macb: add support for resetting PHY using GPIO

With device tree it is no more possible to reset the PHY at board level. Furthermore, doing in the driver allow to power down the PHY when the network interface is no more used. This reset can't be done at the PHY driver level. The PHY must be able to answer to the mii bus scan to let the kernel

Re: [PATCH v4 3/5] PCI: qcom: Add Qualcomm PCIe controller driver

Hi Stan, On Tue, Dec 15, 2015 at 10:24:07AM +0200, Stanimir Varbanov wrote: > On 12/03/2015 03:35 PM, Stanimir Varbanov wrote: > > From: Stanimir Varbanov > > > > The PCIe driver reuse the Designware common code for host > > and MSI initialization, and also program the

Re: [PATCH v2] arm64: dts: berlin4ct: switch to Cortex-A53 specific pmu nodes

On 15.12.2015 15:57, Jisheng Zhang wrote: > Commit ac82d1277215 ("arm64: perf: add Cortex-A53 support") adds the > cortex A53 PMU support, thus instead of using the generic armv8-pmuv3 > compatibility use the more specific Cortex A53 compatibility. > > Signed-off-by: Jisheng Zhang

Re: [PATCH v3] net/macb: add support for resetting PHY using GPIO

On Wed, Dec 16, 2015 at 07:31:30PM +0100, Gregory CLEMENT wrote: > +Optional properties for PHY child node: > +- reset-gpios : Should specify the gpio for phy reset reset-gpios plural or reset-gpio singular? > + > Examples: > > macb0: ethernet@fffc4000 { > @@ -29,4 +32,8 @@ Examples: >

Re: [PATCH V3] ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support

Hi I have address most of the changes but I have problem when I remove the group of pinctrl as you suggest On Mon, Dec 14, 2015 at 09:44:56AM +0100, Michael Trimarchi wrote: > Hi > > On Fri, Dec 11, 2015 at 04:36:17PM +0800, Shawn Guo wrote: > > On Wed, Nov 18, 2015 at 04:10:34PM +0100, Michael

Re: [PATCH v3] net/macb: add support for resetting PHY using GPIO

On Wednesday 16 December 2015 19:31:30 Gregory CLEMENT wrote: > diff --git a/drivers/net/ethernet/cadence/macb.c > b/drivers/net/ethernet/cadence/macb.c > index 88c1e1a..35661aa 100644 > --- a/drivers/net/ethernet/cadence/macb.c > +++ b/drivers/net/ethernet/cadence/macb.c > @@ -28,6 +28,7 @@ >

Re: [PATCH v3 4/9] pinctrl: Add STM32 MCUs support

Hi Maxime On 12/11/2015 09:25 AM, Maxime Coquelin wrote: This patch adds pinctrl and GPIO support to STMicroelectronic's STM32 family of MCUs. While it only supports STM32F429 for now, it has been designed to enable support of other MCUs of the family (e.g. STM32F746). Signed-off-by: Maxime

[RFC 1/3] i2c: document binding for multi-master case

From: Wolfram Sang We need this binding because some I2C master drivers will need to adapt their PM settings for the arbitration circuitry. I skipped the "i2c-" prefix because I can imagine to be useful outside of i2c. Signed-off-by: Wolfram Sang

Re: [PATCH v3] net/macb: add support for resetting PHY using GPIO

Hi Richard, On mer., déc. 16 2015, Richard Cochran wrote: > On Wed, Dec 16, 2015 at 07:31:30PM +0100, Gregory CLEMENT wrote: >> +Optional properties for PHY child node: >> +- reset-gpios : Should specify the gpio for phy reset > > reset-gpios plural or reset-gpio

Re: [PATCH RESEND v3 0/9] Add STM32 pinctrl/GPIO driver

Hi Maxime You can add my Acked-by after fixing the patch 4/9 Thanks Patrice On 12/11/2015 09:24 AM, Maxime Coquelin wrote: Hi Linus, Patrice, I resend the series for Patrice to review it. Thanks, Maxime This is the third round of STM32 pinctrl series, which improves DT bindings

[PATCH v3] extcon: add Maxim MAX3355 driver

Maxim Integrated MAX3355E chip integrates a charge pump and comparators to enable a system with an integrated USB OTG dual-role transceiver to function as an USB OTG dual-role device. In addition to sensing/controlling Vbus, the chip also passes thru the ID signal from the USB OTG connector. On

Re: [PATCH 1/2] devicetree: sound: add binding for WM8974 codec

On Wed, Dec 16, 2015 at 01:54:20PM +, Måns Rullgård wrote: > Mark Brown writes: > > I need the patch in a form I can apply. > I assumed your email client had some way of displaying the message I > replied to. Guess I was wrong. My workflow for reviewing and applying

Re: [PATCH v2 0/3] USB: add generic onboard USB HUB driver

On Wednesday 16 December 2015 16:59:39 Rob Herring wrote: > On Mon, Dec 14, 2015 at 3:35 AM, Arnd Bergmann wrote: > > On Monday 14 December 2015 15:26:11 Peter Chen wrote: > > I agree on doing it properly, but am not sure that pwrseq binding for > MMC is proper. The pwrseq binding

Re: [PATCH 16/19] ARM: dts: s5pv210: replace legacy *,wakeup property with wakeup-source

2015-10-21 19:10 GMT+09:00 Sudeep Holla : > Though the keyboard and other driver will continue to support the legacy > "gpio-key,wakeup", "linux,input-wakeup" boolean property to enable the > wakeup source, "wakeup-source" is the new standard binding. > > This patch replaces

[PATCH v2 0/8] Raspberry Pi 2 support.

This is a major rewrite of the previous Raspberry Pi 2 submission. SMP support is now included, and the DT includes are cleaned up to avoid massive duplication. The branch (based on 4.4-rc5, to get the USB regression fixes) can be found at: https://github.com/anholt/linux/tree/bcm2836-4.4

Re: [PATCH v2 0/3] USB: add generic onboard USB HUB driver

On Mon, Dec 14, 2015 at 3:35 AM, Arnd Bergmann wrote: > On Monday 14 December 2015 15:26:11 Peter Chen wrote: >> Hi all, >> >> There is a known issue that the USB code can't handle USB HUB's >> external pins well, in that case, it may cause some onboard >> USB HUBs can't work since

Re: [PATCH v2 3/4] ARM: dts: vf610-cosmic: relicense vf610-cosmic.dts under GPLv2/X11

Hi Matt, Any chance to get an Ack from you for this patch? -- Stefan On 2015-12-07 13:51, Stefan Agner wrote: > GPLv2-only devicetrees make reuse difficult for software components > licensed under a different license. > > The consensus is that a GPL/X11 dual-license should allow all necessary

Re: [PATCH 12/19] ARM: dts: exynos: replace legacy *,wakeup property with wakeup-source

On 16.12.2015 19:32, Sudeep Holla wrote: > > > On 15/12/15 23:32, Krzysztof Kozlowski wrote: >> On 16.12.2015 01:35, Sudeep Holla wrote: >>> >>> >>> On 21/10/15 11:10, Sudeep Holla wrote: Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup",

Re: [PATCH 12/19] ARM: dts: exynos: replace legacy *,wakeup property with wakeup-source

On 21.10.2015 19:10, Sudeep Holla wrote: > Though the keyboard and other driver will continue to support the legacy > "gpio-key,wakeup", "linux-keypad,wakeup" boolean property to enable the > wakeup source, "wakeup-source" is the new standard binding. > > This patch replaces all the legacy wakeup

[PATCH v2 2/8] irq: bcm2836: Add SMP support for the 2836

From: Andrea Merello The firmware sets the secondaries spinning waiting for a non-NULL value to show up in the last IPI mailbox. The original SMP port from the downstream tree was done by Andrea, and Eric cleaned it up/rewrote it a few times from there. Signed-off-by:

[PATCH v2 1/8] irq: bcm2836: Fix initialization of the LOCAL_IRQ_CNT*IRQ timers

The irqchip's register area includes the the setup for the timer's scaling factors, and for the platform we want a fixed configuration of these registers. Signed-off-by: Eric Anholt --- drivers/irqchip/irq-bcm2836.c | 26 ++ 1 file changed, 26

[PATCH v2 8/8] ARM: bcm2835: Add Kconfig support for bcm2836

This should be a complete port of bcm2835 functionality to bcm2836 (Raspberry Pi 2). Signed-off-by: Eric Anholt --- v2: Implement Arnd's feedback to not split to ARCH_BCM2836, and instead use more conditionals in ARCH_BCM2835. Also reduce diff between 2835 and 2836.

[PATCH v2 7/8] ARM: bcm2835: Add a compat string for bcm2836 machine probe

Supporting the 2836 requires using the new interrupt controller, which we have support for. Signed-off-by: Eric Anholt --- arch/arm/mach-bcm/board_bcm2835.c | 5 + 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-bcm/board_bcm2835.c

[PATCH v2 4/8] ARM: bcm2835: Split the DT for peripherals from the DT for the CPU

The set of peripherals remained constant across bcm2835 (Raspberry Pi 1) and bcm2836 (Raspberry Pi 2), but the CPU was swapped out. Split the files so that we can include just peripheral setup in 2836. Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2835.dtsi

[PATCH v2 5/8] ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.

For Raspberry Pi 2, we want to use the same general pin assignment bits, but need to use bcm2836.dtsi for the CPU instead. Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 +

[PATCH v2 3/8] dt-bindings: Add root properties for Raspberry Pi 2

Signed-off-by: Eric Anholt --- Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt index

[PATCH v2 6/8] ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B

The Pi 2 B ends up like a Pi 1 B+, with the same peripherals and pinout, but the CPU and memory layout changed to use the 2836. Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 35 arch/arm/boot/dts/bcm2836.dtsi| 77

Re: [PATCH 2/5] clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for aclk_vio

Am Mittwoch, 16. Dezember 2015, 16:27:18 schrieb Caesar Wang: > From: Yakir Yang > > ACLK_VIO is the noc bus clock for display module, display cann't > read data from ddr without this clock enabled. > > Due to it shouldn't belong to any driver, but we need it enabled, > so

Re: [PATCH v4 3/5] PCI: qcom: Add Qualcomm PCIe controller driver

On Thu, Dec 03, 2015 at 03:35:22PM +0200, Stanimir Varbanov wrote: > From: Stanimir Varbanov > > The PCIe driver reuse the Designware common code for host > and MSI initialization, and also program the Qualcomm > application specific registers. > > Signed-off-by: Stanimir

[PATCH v4 1/4] ARM: bcm2835: Define two new packets from the latest firmware.

These packets give us direct access to the firmware's power management code, as opposed to GET/SET_POWER_STATE packets that only had a couple of domains implemented. Signed-off-by: Eric Anholt --- include/soc/bcm2835/raspberrypi-firmware.h | 2 ++ 1 file changed, 2

Re: [PATCH v3] extcon: add Maxim MAX3355 driver

Hi Sergei, On 2015년 12월 17일 03:07, Sergei Shtylyov wrote: > Maxim Integrated MAX3355E chip integrates a charge pump and comparators to > enable a system with an integrated USB OTG dual-role transceiver to > function as an USB OTG dual-role device. In addition to sensing/controlling > Vbus, the

Re: [PATCH v2 2/8] irq: bcm2836: Add SMP support for the 2836

Hi Eric, On Wed, Dec 16, 2015 at 03:55:09PM -0800, Eric Anholt wrote: > @@ -226,6 +228,26 @@ static const struct irq_domain_ops > bcm2836_arm_irqchip_intc_ops = { > .xlate = irq_domain_xlate_onecell > }; > > +#ifdef CONFIG_SMP Why not put this section under the existing '#ifdef

Re: [PATCH v2 6/8] [Media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver

On Wed, 2015-12-16 at 14:47 +0100, Hans Verkuil wrote: > On 12/16/15 14:17, tiffany lin wrote: > > Hi Hans, > > > > > > On Tue, 2015-12-15 at 15:17 +0100, Hans Verkuil wrote: > >> > >> On 12/15/15 14:51, tiffany lin wrote: > >>> We are not familiar with v4l2-compliance utility, we will check how

Re: [PATCH v9 0/4] Exynos SROMc configuration and Ethernet support for SMDK5410

On 16.11.2015 16:43, Pavel Fedin wrote: > This patch extends Exynos SROM controller driver with ability to configure > controller outputs and enables SMSC9115 Ethernet chip on SMDK5410 board, > which is connected via SROMc bank #3. > > With this patchset, support for the whole existing SMDK range

Re: [PATCH v2 0/3] USB: add generic onboard USB HUB driver

On Wed, Dec 16, 2015 at 09:05:35PM +0100, Maciej S. Szmigiero wrote: > Hi Fabio, > Hi Peter, > > On 16.12.2015 11:11, Fabio Estevam wrote: > > Hi Peter, > > > > On Wed, Dec 16, 2015 at 2:11 AM, Peter Chen > > wrote: > > > >> Thanks, Fabio, but I am curious how things

Re: [RFC PATCH 3/7] doc: dt: mtd: partition: add on-flash format binding

On Tue, Dec 15, 2015 at 11:03:48AM +0100, Geert Uytterhoeven wrote: > Hi David, > > On Tue, Dec 15, 2015 at 7:00 AM, David Gibson > wrote: > >> If the only property needed is the partition table offset, it can be > >> encoded > >> in the unit-address, and the "reg"

Re: [GIT PULL 0/9] ARM: EXYNOS: Pull request for v4.5

On 17.12.2015 10:43, Krzysztof Kozlowski wrote: > On 02.12.2015 10:39, Krzysztof Kozlowski wrote: >> Hi Kukjin, >> >> A lot of stuff for v4.5 with 3 dependencies split into >> separate tags. The need for dependency is explained both >> in merge-commit and in description of a tag which is using >>

[PATCH 12/12] ASoC: rsnd: add Multi channel support

From: Kuninori Morimoto This patch adds Multi channel support on Renesas R-Car sound. This patch is tested on Salvator-X board, but it can't use Multi channel, because supported format is different between codec chip and R-Car. Thus, it was tested on board

[PATCH 10/12] ASoC: rsnd: add missing DT example for Simple Card

From: Kuninori Morimoto Signed-off-by: Kuninori Morimoto --- .../devicetree/bindings/sound/renesas,rsnd.txt | 40 ++ 1 file changed, 40 insertions(+) diff --git

[PATCH 11/12] ASoC: rsnd: add missing DT example for Simple Card with TDM

From: Kuninori Morimoto Signed-off-by: Kuninori Morimoto --- .../devicetree/bindings/sound/renesas,rsnd.txt| 19 +++ 1 file changed, 19 insertions(+) diff --git

Re: [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver

Ulf Hansson writes: > On 16 December 2015 at 02:27, Krzysztof Kozlowski > wrote: >> 2015-12-16 10:11 GMT+09:00 Sebastian Reichel : >>> Hi, >>> >>> On Tue, Dec 15, 2015 at 04:53:31PM -0800, Eric Anholt wrote: >> There are 6

Re: [PATCH v2 0/8] Raspberry Pi 2 support.

Arnd Bergmann writes: > On Wednesday 16 December 2015 15:55:07 Eric Anholt wrote: >> This is a major rewrite of the previous Raspberry Pi 2 submission. >> SMP support is now included, and the DT includes are cleaned up to >> avoid massive duplication. >> >> The branch (based on

[PATCH v4 4/4] ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.

From: Alexander Aring This connects the USB driver to the USB power domain, so that USB can actually be turned on at boot if the bootloader didn't do it for us. Signed-off-by: Alexander Aring Signed-off-by: Eric Anholt ---

[PATCH v4 0/4] Raspberry Pi power domains

Update from v3 to move the driver under drivers/soc. I've placed it under drivers/soc/bcm since that's how the other drivers under drivers/soc are structured. Alexander Aring (3): ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Add

[PATCH v4 3/4] dt-bindings: add rpi power domain driver bindings

From: Alexander Aring This patch adds devicetree tree bindings for the Raspberry Pi power domain driver. Signed-off-by: Alexander Aring Acked-by: Rob Herring Signed-off-by: Eric Anholt --- v2: Add the new domains

[PATCH v4 2/4] ARM: bcm2835: add rpi power domain driver

From: Alexander Aring This patch adds support for several power domains on Raspberry Pi, including USB (so it can be enabled even if the bootloader didn't do it), and graphics. This patch is the combined work of Eric Anholt (who wrote USB support inside of the Raspberry Pi

Re: [PATCH v3] extcon: add Maxim MAX3355 driver

2015-12-17 3:07 GMT+09:00 Sergei Shtylyov : > Maxim Integrated MAX3355E chip integrates a charge pump and comparators to > enable a system with an integrated USB OTG dual-role transceiver to > function as an USB OTG dual-role device. In addition to

Re: [GIT PULL 0/9] ARM: EXYNOS: Pull request for v4.5

On 02.12.2015 10:39, Krzysztof Kozlowski wrote: > Hi Kukjin, > > A lot of stuff for v4.5 with 3 dependencies split into > separate tags. The need for dependency is explained both > in merge-commit and in description of a tag which is using > the dependency. Hi everyone, It's been like two

Re: [PATCH v2 0/3] USB: add generic onboard USB HUB driver

On Thu, Dec 17, 2015 at 12:13:07AM +0100, Arnd Bergmann wrote: > On Wednesday 16 December 2015 16:59:39 Rob Herring wrote: > > On Mon, Dec 14, 2015 at 3:35 AM, Arnd Bergmann wrote: > > > On Monday 14 December 2015 15:26:11 Peter Chen wrote: > > > > I agree on doing it properly, but

[PATCH 6/6] dt-bindings: add document for rk3036-vop

Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org Signed-off-by: Mark Yao ---

Re: [PATCH v2 0/8] Raspberry Pi 2 support.

On Wednesday 16 December 2015 15:55:07 Eric Anholt wrote: > This is a major rewrite of the previous Raspberry Pi 2 submission. > SMP support is now included, and the DT includes are cleaned up to > avoid massive duplication. > > The branch (based on 4.4-rc5, to get the USB regression fixes) can

Re: [PATCH v3 0/5] Add reboot notifier driver for rockchip platform

On Mon, Dec 14, 2015 at 2:30 AM, Andy Yan wrote: > On 2015年12月12日 05:29, Heiko Stübner wrote: >> Am Mittwoch, 18. November 2015, 17:47:24 schrieb Andy Yan: >>> >>> rockchip platform have a protocol to pass the kernel reboot >>> mode to bootloader by some special registers

Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.

On 16-12-15, 21:29, Dawei Chien wrote: > Use Intelligent Power Allocation (IPA) technical to add dynamic power model > for binding CPU thermal zone. The power allocator governor allocates power > budget to control CPU temperature. > > Power Allocator governor is able to keep SOC temperature

Re: [PATCH v3] extcon: add Maxim MAX3355 driver

Hi, On 2015년 12월 17일 11:16, Chanwoo Choi wrote: > Hi Sergei, > > On 2015년 12월 17일 03:07, Sergei Shtylyov wrote: >> Maxim Integrated MAX3355E chip integrates a charge pump and comparators to >> enable a system with an integrated USB OTG dual-role transceiver to >> function as an USB OTG dual-role

Re: [PATCH v6 4/5] iommu/mediatek: Add mt8173 IOMMU driver

On Wed, 2015-12-16 at 12:48 +, Robin Murphy wrote: > On 16/12/15 05:59, Yong Wu wrote: > > On Tue, 2015-12-15 at 12:37 +, Robin Murphy wrote: > >> On 15/12/15 03:28, Yong Wu wrote: > >>> On Mon, 2015-12-14 at 15:16 +0100, Joerg Roedel wrote: > On Tue, Dec 08, 2015 at 05:49:12PM +0800,

Re: [PATCH 2/2] Input: add touchscreen support for TS-4800

Hi Damien, On Thu, Dec 10, 2015 at 11:11:12AM -0500, Damien Riegel wrote: > On this board, the touchscreen, an ads7843, is not handled directly by > Linux but by a companion FPGA. This FPGA is memory-mapped and the IP > design is very similar to the mk712. > > This commit adds the support for

Re: [PATCH 1/5] clk: rockchip: rk3036: include downstream muxes into fractional dividers

Hi Caesar, [auto build test ERROR on rockchip/for-next] [also build test ERROR on next-20151216] [cannot apply to clk/clk-next v4.4-rc5] url: https://github.com/0day-ci/linux/commits/Caesar-Wang/Kylin-board-is-based-on-RK3036-SOCs-add-the-initiation/20151216-163233 base: https

Re: [PATCH 1/3] ARM: dts: lpc4337-ciaa: enable EEPROM memory

Joachim, El 14/12/15 a las 19:52, Joachim Eastwood escribió: > Hi Ariel, > > On 25 November 2015 at 13:28, Ariel D'Alessandro > wrote: >> (+To: Joachim) >> >> El 23/11/15 a las 09:37, Ariel D'Alessandro escribió: >>> The CIAA-NXP board has a NXP LPC4337 SoC that

Re: [PATCH 1/2] devicetree: sound: add binding for WM8974 codec

On Wed, Dec 16, 2015 at 01:31:30PM +, Måns Rullgård wrote: > This is the 1/1 you were missing. I need the patch in a form I can apply. > Am I the only one who is annoyed by scripts/get_maintainer.pl not > returning all the addresses it should in cases like this? Is there some > trick I'm

Re: [PATCH v2 6/8] [Media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver

On 12/16/15 14:17, tiffany lin wrote: > Hi Hans, > > > On Tue, 2015-12-15 at 15:17 +0100, Hans Verkuil wrote: >> >> On 12/15/15 14:51, tiffany lin wrote: >>> We are not familiar with v4l2-compliance utility, we will check how to >>> use it. >> >> It's part of v4l-utils.git

[PATCH] devicetree: sound: add binding for WM8974 codec

This adds a binding for the Wolfson WM8974 mono audio codec. Signed-off-by: Mans Rullgard --- Sending this patch again, this time including Mark Brown. --- Documentation/devicetree/bindings/sound/wlf,wm8974.txt | 15 +++ 1 file changed, 15 insertions(+) create mode

Re: [PATCH 5/5] ARM: config: Add the rk3036 configure for kylin board

Hi Caesar, Am Mittwoch, 16. Dezember 2015, 16:27:21 schrieb Caesar Wang: > Add RK3036-specific configuration for Kylin board. > > Signed-off-by: Caesar Wang I don't think we generally do per-board defconfigs in the mainline kernel anymore. If you are missing specific

Re: [PATCH V4 16/16] ARM64: tegra: select PM_GENERIC_DOMAINS

On 16 December 2015 at 12:40, Jon Hunter wrote: > > On 16/12/15 09:47, Ulf Hansson wrote: >> On 16 December 2015 at 10:40, Jon Hunter wrote: >>> Hi Ulf, >>> >>> On 15/12/15 19:54, Ulf Hansson wrote: On 4 December 2015 at 15:57, Jon Hunter

[PATCH v6 2/3] arm64: dts: mt8173: Add thermal zone node.

This adds thermal zone node to Mediatek MT8173 dtsi file. Signed-off-by: Dawei Chien --- This patch is base on patchset: https://lkml.org/lkml/2015/11/30/239 --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 43 ++ 1 file changed, 43

[PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.

Use Intelligent Power Allocation (IPA) technical to add dynamic power model for binding CPU thermal zone. The power allocator governor allocates power budget to control CPU temperature. Power Allocator governor is able to keep SOC temperature within a defined temperature range to avoid SOC

[PATCH v6 3/3] arm64: dts: mt8173: Add dynamic power node.

This device node is for calculating dynamic power in mW. Since mt8173 has two clusters, there are two dynamic power coefficient as well. Signed-off-by: Dawei Chien --- This patch is base on patchset: https://lkml.org/lkml/2015/11/17/251 ---

[PATCH v6 1/3] thermal: mediatek: Add cpu dynamic power cooling model.

MT8173 cpufreq driver select of_cpufreq_power_cooling_register registering cooling devices with dynamic power coefficient. Signed-off-by: Dawei Chien --- This patch is base on patchset: https://lkml.org/lkml/2015/11/17/251 --- drivers/cpufreq/mt8173-cpufreq.c | 11

Re: [PATCH 1/2] devicetree: sound: add binding for WM8974 codec

Mark, This is the 1/1 you were missing. Am I the only one who is annoyed by scripts/get_maintainer.pl not returning all the addresses it should in cases like this? Is there some trick I'm missing? Mans Rullgard writes: > This adds a binding for the Wolfson WM8974 mono audio

Re: [PATCH 3/5] ARM: dts: rockchip: update the core dts for rk3036

Hi Caesar, Am Mittwoch, 16. Dezember 2015, 16:27:19 schrieb Caesar Wang: > Update the core dts for rk3036 SoCs. > > 1) Add the display (lcdc, hdmi, vop...) device node. > 2) modify the i2s name to i2s0 and i2s1. >Although there is only one i2s IP inside the rk3036, >we need use all of

Re: [PATCH 1/2] devicetree: sound: add binding for WM8974 codec

Mark Brown writes: > On Wed, Dec 16, 2015 at 01:31:30PM +, Måns Rullgård wrote: > >> This is the 1/1 you were missing. > > I need the patch in a form I can apply. I assumed your email client had some way of displaying the message I replied to. Guess I was wrong. >> Am

Re: [PATCH v4 1/3] dt-binding: power: Add otg regulator binding

On Wed, Dec 16, 2015 at 12:13:50AM +0100, Sebastian Reichel wrote: > On Tue, Dec 15, 2015 at 11:52:10AM -0800, Tim Bird wrote: > > Add a binding for the regulator which controls the OTG chargepath switch. > > The OTG switch gets its power from pm8941_5vs1, and that should be > > expressed as a

Re: [PATCH v5 2/3] arm64: dts: mt8173: Add thermal zone node.

On Wed, 2015-12-16 at 19:22 +0800, Daniel Kurtz wrote: > On Wed, Dec 16, 2015 at 6:09 PM, dawei chien wrote: > > On Wed, 2015-12-16 at 16:34 +0800, Daniel Kurtz wrote: > >> On Wed, Dec 16, 2015 at 11:59 AM, Dawei Chien > >> wrote: > >> > > >>

Re: [PATCH v2 6/8] [Media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver

Hi Hans, On Tue, 2015-12-15 at 15:17 +0100, Hans Verkuil wrote: > > On 12/15/15 14:51, tiffany lin wrote: > > Hi Hans, > > > > Thanks for your time. > > > > On Mon, 2015-12-14 at 13:50 +0100, Hans Verkuil wrote: > >> Hi Tiffany, > >> > >> My apologies for the long delay, but I finally have

Re: [PATCH v2] ARM: dts: imx7d: cl-som-imx7: add basic module support

Hi Shawn, On 12/14/15 04:43, Shawn Guo wrote: > On Thu, Dec 10, 2015 at 04:01:37PM +0200, Igor Grinberg wrote: >> From: Ilya Ledvich [...] >> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt >> b/Documentation/devicetree/bindings/arm/fsl.txt >> index

Re: [PATCH v6 4/5] iommu/mediatek: Add mt8173 IOMMU driver

On Tue, Dec 15, 2015 at 12:37:34PM +, Robin Murphy wrote: > The potential issue I *do* see, looking more closely, is that > iommu_group_get_for_dev() is setting group->domain but not calling > the attach_dev callback, which looks wrong... Attaching the device happens from

Re: [PATCH 1/2] devicetree: add vendor prefix for Kyocera Corporation

On Wed, Dec 02, 2015 at 07:41:10PM +0100, Lucas Stach wrote: > KYO is the stock ticker symbol of Kyocera Corporation. > > Signed-off-by: Lucas Stach > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Both patches

Re: [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7

Hi Shawn, On 12/14/15 04:47, Shawn Guo wrote: > On Mon, Dec 07, 2015 at 09:14:31AM +0200, Ilya Ledvich wrote: >> Ilya Ledvich (8): >> ARM: dts: imx7d: cl-som-imx7: add basic module support >> ARM: dts: imx7d: cl-som-imx7: add usb otg support >> ARM: dts: imx7d: cl-som-imx7: add eMMC support

[PATCH v3 5/7] media: set proper max seg size for devices on Exynos SoCs

All multimedia devices found on Exynos SoCs support only contiguous buffers, so set DMA max segment size to DMA_BIT_MASK(32) to let memory allocator to correctly create contiguous memory mappings. Signed-off-by: Marek Szyprowski ---

[PATCH v3 0/7] Exynos: MFC driver: reserved memory cleanup and IOMMU support

Hello, This patchset finally perform cleanup of custom code in s5p-mfc codec driver. The first part is removal of custom, driver specific code for intializing and handling of reserved memory. Instead, a generic code for reserved memory regions is used. Then, once it is done, the proper setup of

[PATCH v3 4/7] media: vb2-dma-contig: add helper for setting dma max seg size

Add a helper function for device drivers to set DMA's max_seg_size. Setting it to largest possible value lets DMA-mapping API always create contiguous mappings in DMA address space. This is essential for all devices, which use dma-contig videobuf2 memory allocator and shared buffers.

[PATCH v3 6/7] media: s5p-mfc: replace custom reserved memory init code with generic one

This patch removes custom code for initialization and handling of reserved memory regions in s5p-mfc driver and replaces it with generic named reserved memory regions specified in device tree. s5p-mfc driver now handles two reserved memory regions: "left" and "right", defined by generic reserved

[PATCH v3 3/7] of: reserved_mem: add support for named reserved mem nodes

This patch allows device drivers to initialize more than one reserved memory region assigned to given device. When driver needs to use more than one reserved memory region, it should allocate child devices and initialize regions by index or name for each of its child devices. Signed-off-by: Marek

[PATCH v3 7/7] media: s5p-mfc: add iommu support

This patch adds support for IOMMU to s5p-mfc device driver. MFC firmware is limited and it cannot use the default configuration. If IOMMU is available, the patch disables the default DMA address space configuration and creates a new address space of size limited to 256M and base address set to

[PATCH v3 2/7] ARM: dts: exynos4412-odroid*: enable MFC device

Enable support for Multimedia Codec (MFC) device for all Exynos4412-based Odroid boards. Signed-off-by: Marek Szyprowski --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 24 1 file changed, 24 insertions(+) diff --git

[PATCH v3 1/7] ARM: Exynos: convert MFC device to generic reserved memory bindings

This patch replaces custom properties for definining reserved memory regions with generic reserved memory bindings. All custom code for handling MFC-specific reserved memory can be now removed from Exynos-DT generic board code. Signed-off-by: Marek Szyprowski ---

Re: [PATCH 2/3] ARM: dts: lpc4337-ciaa: enable SCT-PWM

Joachim, El 14/12/15 a las 19:48, Joachim Eastwood escribió: > Hi Ariel, > > Sorry for the late reply. I have just started to put together my DT > for 4.5 branch now. > > On 25 November 2015 at 13:28, Ariel D'Alessandro > wrote: >> (+To: Joachim) >> >> El 23/11/15 a

Re: [PATCH v2 1/3] reset: Add shared reset_control_[de]assert variants

Hi Maxime, Am Mittwoch, den 16.12.2015, 11:29 +0100 schrieb Maxime Ripard: > On Mon, Dec 14, 2015 at 10:50:55AM +0100, Philipp Zabel wrote: > > Am Montag, den 14.12.2015, 10:36 +0100 schrieb Maxime Ripard: > > > Hi, > > > > > > On Fri, Dec 11, 2015 at 04:41:58PM +0100, Hans de Goede wrote: > > >

Re: [PATCH v5 2/3] arm64: dts: mt8173: Add thermal zone node.

On Wed, Dec 16, 2015 at 6:09 PM, dawei chien wrote: > On Wed, 2015-12-16 at 16:34 +0800, Daniel Kurtz wrote: >> On Wed, Dec 16, 2015 at 11:59 AM, Dawei Chien >> wrote: >> > >> > This adds thermal zone node to Mediatek MT8173 dtsi file. >> > >>

Re: [PATCH V4 16/16] ARM64: tegra: select PM_GENERIC_DOMAINS

On 16/12/15 09:47, Ulf Hansson wrote: > On 16 December 2015 at 10:40, Jon Hunter wrote: >> Hi Ulf, >> >> On 15/12/15 19:54, Ulf Hansson wrote: >>> On 4 December 2015 at 15:57, Jon Hunter wrote: Enable PM_GENERIC_DOMAINS for tegra 64-bit devices.

Re: [PATCH v6 4/5] iommu/mediatek: Add mt8173 IOMMU driver

On 16/12/15 05:59, Yong Wu wrote: On Tue, 2015-12-15 at 12:37 +, Robin Murphy wrote: On 15/12/15 03:28, Yong Wu wrote: On Mon, 2015-12-14 at 15:16 +0100, Joerg Roedel wrote: On Tue, Dec 08, 2015 at 05:49:12PM +0800, Yong Wu wrote: +static int mtk_iommu_attach_device(struct iommu_domain

[PATCH 1/2] devicetree: sound: add binding for WM8974 codec

This adds a binding for the Wolfson WM8974 mono audio codec. Signed-off-by: Mans Rullgard --- The Linux driver for this device currently only supports I2C, but SPI could easily be added if necessary, and DT bindings are supposed to be generic. ---

Re: [PATCH v7 02/14] drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.

Hi Philipp, On Wed, Dec 16, 2015 at 5:52 PM, Philipp Zabel wrote: > Hi Daniel, > > Am Dienstag, den 15.12.2015, 02:57 +0800 schrieb Daniel Kurtz: >> HI Philipp, >> >> This driver is looking really good. >> >> But, still some things to think about (mostly small) inline

Re: [PATCH v3 0/3] usb: renesas_usbhs: More compat strings

Hi, Simon Horman writes: > Hi, > > this short series adds generic, and soc-specific r8a7792 and r8a7793 compat > strings to the Renesas USBHS driver. The intention is to provide a complete > set of compat strings for known R-Car SoCs. > > Changes since v2: > * Split

Re: [PATCH] usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller

Hi, Arnd Bergmann writes: >> +struct renesas_usb3; >> +struct renesas_usb3_request { >> +struct usb_request req; >> +struct list_headqueue; >> +}; > > There is already a list_head in struct usb_request. Could you use that? > (I don't know, just asking because

Re: [PATCH v2 0/6] pwm: lpc32xx: fixes in the LPC32xx PWM driver

On Sun, Dec 06, 2015 at 01:31:56PM +0200, Vladimir Zapolskiy wrote: > The changeset fixes a number of issues within current implementation > of LPC32xx PWM controller driver, namely > - the SoC has two independent PWM controllers with one channel each, > - runtime warnings from common clock

Re: [PATCH 1/2] dt-bindings: GPIO: Add generic serializer binding

On Mon, Dec 14, 2015 at 5:19 PM, Andrew F. Davis wrote: > On 12/14/2015 04:36 PM, Rob Herring wrote: >> >> On Mon, Dec 14, 2015 at 10:41 AM, Andrew F. Davis wrote: >>> >>> On 12/11/2015 03:48 PM, Linus Walleij wrote: On Fri, Dec 11, 2015 at 8:46 PM,

[PATCH v6 1/9] mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings

The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. It is functionally identical to AXP221; only the regulator default voltage/status and the external host interface are different. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard

[PATCH v6 6/9] mfd: axp20x: Add support for RSB based AXP223 PMIC

The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. It is functionally identical to AXP221; only the regulator default voltage/status and the external host interface are different. Signed-off-by: Chen-Yu Tsai --- drivers/mfd/Kconfig| 11 +++

[PATCH v6 5/9] mfd: axp20x: Whitespace, open parenthesis alignment code style fixes

This fixes some leftover code style issues in the axp20x core. Signed-off-by: Chen-Yu Tsai --- drivers/mfd/axp20x.c | 8 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 631ad64ddf69..54a00168da26 100644 ---

  1   2   >