On Fri, Dec 18, 2015 at 5:44 AM, kbuild test robot wrote:
> Hi Stanimir,
>
> [auto build test WARNING on next-20151218]
> [also build test WARNING on v4.4-rc5]
> [cannot apply to pci/next robh/for-next v4.4-rc5 v4.4-rc4 v4.4-rc3]
>
> url:
>
Hi,
On 2015년 12월 21일 02:15, Sergei Shtylyov wrote:
> Hello.
>
> On 12/20/2015 05:31 PM, Chanwoo Choi wrote:
>
>> This patch depend on GPIOLIB configuration as following:
>> I modified it with following diff and applied it.
>>
>> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
>>
On Fri, Dec 18, 2015 at 11:32:15AM +0100, Wolfram Sang wrote:
> On Fri, Dec 18, 2015 at 10:06:48AM +0100, Arnd Bergmann wrote:
> > On Friday 18 December 2015 08:35:32 Wolfram Sang wrote:
> > > >
> > > > It seems to me that we have some consensus around:
> > > >
> > > > compatible =
On Sun, Dec 20, 2015 at 7:43 PM, Hans de Goede wrote:
> Add a node describing the focaltech ft5306de4 touchscreen found on
> inet97fv2 tablets.
>
> Signed-off-by: Hans de Goede
> ---
> arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 11 +++
> 1 file
On Sun, Dec 20, 2015 at 7:42 PM, Hans de Goede wrote:
> Add a node describing the focaltech ft5406ee8 touchscreen found on
> inet-9f-rev03 / qware qw tb-g100 tablets.
>
> Signed-off-by: Hans de Goede
> ---
> arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
On Sun, Dec 20, 2015 at 7:43 PM, Hans de Goede wrote:
> The Wits Pro A20 DKT has a gbit ethernet port, enable it.
>
> Signed-off-by: Hans de Goede
Acked-by: Chen-Yu Tsai
--
To unsubscribe from this list: send the line "unsubscribe
Hi,
On Sun, Dec 20, 2015 at 7:43 PM, Hans de Goede wrote:
> The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet,
> featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack.
>
> Empire Electronix is written on the back of the tablet, the D709
On Wed, Dec 16, 2015 at 04:01:08PM +0200, Igor Grinberg wrote:
> Hi Shawn,
>
> On 12/14/15 04:43, Shawn Guo wrote:
> > On Thu, Dec 10, 2015 at 04:01:37PM +0200, Igor Grinberg wrote:
> >> From: Ilya Ledvich
>
> [...]
>
> >> diff --git
On Wed, Dec 16, 2015 at 07:12:05PM +0100, Michael Trimarchi wrote:
> Hi
>
> I have address most of the changes but I have problem when I remove
> the group of pinctrl as you suggest
...
> > > > + {
> > >
> > > Suggest move iomuxc node to the bottom to make the file a bit easier to
> > > read.
>
On Fri, Dec 11, 2015 at 07:12:11AM +0800, frank...@freescale.com wrote:
> From: Frank Li
>
> i.MX7D Supported ARCH Timer.
>
> Signed-off-by: Frank Li
> ---
> arch/arm/mach-imx/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git
On Sat, Dec 19, 2015 at 11:05 PM, wrote:
> From: Marcus Cooper
>
> The A20 Itead Core module comes with 4GB NAND and 1GB DDR RAM. All of the
> I/O interfaces are exposed via 4 groups of 2*30 1mm pitched female headers.
>
> Signed-off-by: Marcus Cooper
On Thu, Dec 17, 2015 at 03:23:59PM -0600, Zhi Li wrote:
> On Thu, Dec 17, 2015 at 2:45 PM, Stefan Agner wrote:
> > On 2015-12-10 15:12, frank...@freescale.com wrote:
> >> From: Frank Li
> >>
> >> add cortex a7 arch timer.
> >> uboot v2016.01-rc2 supported
Hi Biao and Joe,
On Fri, Dec 18, 2015 at 11:13 PM, Yingjoe Chen
wrote:
> On Fri, 2015-12-11 at 17:07 +0800, Biao Huang wrote:
>> Add mt2701 support using mediatek common pinctrl driver.
>> MT2701 have some special pins need an extra setting register
>> than other ICs,
On Sun, Dec 20, 2015 at 7:42 PM, Hans de Goede wrote:
> Add a node describing the focaltech ft5306de4 touchscreen found on
> chuwi-v7-cw0825 tablets.
>
> Signed-off-by: Hans de Goede
> ---
> arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 11
Hi
> > +thermal: thermal@e61f {
> > + compatible ="renesas,thermal-r8a7790",
> > + "renesas,rcar-gen2-thermal",
> > + "renesas,rcar-thermal";
>
> Isn't having both mutually exclusive?
"rcar-thermal" is very basic version of "rcar-gen2",
and
Hi,
On Sat, Dec 19, 2015 at 11:05 PM, wrote:
> From: Marcus Cooper
>
> Itead have a core module board that can be populated with either
> an Allwinner A10 or A20 SoC. This patch creates a common dtsi
> which these boards can use.
>
> Signed-off-by:
On Wed, Dec 16, 2015 at 04:09:02PM +0200, Igor Grinberg wrote:
> Hi Shawn,
>
> On 12/14/15 04:47, Shawn Guo wrote:
> > On Mon, Dec 07, 2015 at 09:14:31AM +0200, Ilya Ledvich wrote:
> >> Ilya Ledvich (8):
> >> ARM: dts: imx7d: cl-som-imx7: add basic module support
> >> ARM: dts: imx7d:
Hi Bjorn, can you comment on this. Marc has also replied for query on
irq_dispose_mapping().
> Subject: RE: [PATCH v11] PCI: Xilinx-NWL-PCIe: Added support for Xilinx NWL
> PCIe Host Controller
>
> > Subject: Re: [PATCH v11] PCI: Xilinx-NWL-PCIe: Added support for
> > Xilinx NWL PCIe Host
Hi Mark
On 12/21/2015 03:25 PM, Mark yao wrote:
Hi Yakir
I want to convert drm/rockchip to support atomic api,
I'd like you can do some modify to adapt it.
Sure, would update as soon as possible.
Thanks,
- Yakir
- Mark
On 2015年11月11日 15:45, Yakir Yang wrote:
Hi guys:
Here are a
Hi Mark,
On 12/21/2015 03:31 PM, Mark yao wrote:
On 2015年11月11日 15:46, Yakir Yang wrote:
+hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+drm_connector_helper_add(>connector,
+ _hdmi_connector_helper_funcs);
+drm_connector_init(drm, >connector,
On Fri, Dec 18, 2015 at 11:08:26AM +0100, Alexander Aring wrote:
...
> Uncompressing Linux... done, booting the kernel.
> [0.00] Booting Linux on physical CPU 0x0
> [0.00] Initializing cgroup subsys cpuset
> [0.00] Initializing cgroup subsys cpu
> [0.00]
As the Dan report the smatch check the thermal driver warning:
drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
(s32min-s32max > s32max)'
Although The shut_temp read from DT is u32,the temperature is currently
Add a node describing the focaltech ft5306de4 touchscreen found on
inet97fv2 tablets.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 11 +++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
The Wits Pro A20 DKT has a gbit ethernet port, enable it.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
Add a node describing the focaltech ft5406ee8 touchscreen found on
inet-9f-rev03 / qware qw tb-g100 tablets.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 10 ++
1 file changed, 10 insertions(+)
diff --git
Add a node describing the focaltech ft5306de4 touchscreen found on
chuwi-v7-cw0825 tablets.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 11 +++
1 file changed, 11 insertions(+)
diff --git
The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet,
featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack.
Empire Electronix is written on the back of the tablet, the D709 model
info can be found in the about tablet menu in android.
The PCB has no markings to
在 2015年12月18日 04:09, Eduardo Valentin 写道:
Hello,
On Thu, Dec 03, 2015 at 04:48:38PM +0800, Caesar Wang wrote:
This series pacthes to support the next soc for this thermal driver.
I don't add the dts thermal data since these SoCs have *_not_* land
in this mainline. I believe these SoCs dts
Some displays have a reset input and/or need a regulator to function
properly. Allow to specify them for panel-dpi devices.
Signed-off-by: Uwe Kleine-König
---
Documentation/devicetree/bindings/display/panel/panel-dpi.txt | 2 ++
1 file changed, 2 insertions(+)
On Sat, 2015-12-19 at 21:38 -0600, Rob Herring wrote:
> On Tue, Dec 15, 2015 at 08:45:23PM +0300, Sergei Ianovich wrote:
>
> Nothing in this is specific to ICP, so the subject should be updated.
>
> > Signed-off-by: Sergei Ianovich
> > CC: Alexandre Belloni
[Cc += devicetree@vger.kernel.org]
Hello Tomi,
On Wed, Dec 16, 2015 at 07:35:30PM +0200, Tomi Valkeinen wrote:
>
> On 10/12/15 15:11, Uwe Kleine-König wrote:
> > From: Uwe Kleine-König
> >
> > Some displays have a reset input. To assert that the display is
> >
On Sat, 2015-12-19 at 21:38 -0600, Rob Herring wrote:
> On Tue, Dec 15, 2015 at 09:58:53PM +0300, Sergei Ianovich wrote:
> > This provides an MTD device driver for 512kB of battery backed up
> > SRAM
> > on ICPDAS LP-8X4X programmable automation controllers.
> >
> > SRAM chip is connected via
Hi Rob,
On Sunday 20 December 2015 09:09 AM, Rob Herring wrote:
> On Tue, Dec 15, 2015 at 02:46:08PM +0530, Kishon Vijay Abraham I wrote:
>> Deprecate using phy-omap-control driver to power on/off the PHY,
>> and use *syscon* framework to do the same. This handles
>> powering on/off the PHY for
Hi,
2015-12-18 12:16 GMT+01:00 Maxime Ripard :
>> sun4i_spi_write(sspi, SUN4I_CLK_CTL_REG, reg);
>>
>> + /*
>> + * Setup wait time between words.
>> + *
>> + * Wait time is set in SPI_CLK cycles. The SPI hardware needs 3
>> + *
I think the tsadc is fakly hand on pinky board,
maybe that's fixed in newest kernel.
As the following patch is a example:
https://patchwork.kernel.org/patch/7472051/
I don't have meet this issue on pinky board.
Let me know if that's still hanging on pinky board.
Signed-off-by: Caesar Wang
Hi Heiko,
在 2015年12月20日 01:16, Heiko Stübner 写道:
Hi Caesar,
Am Donnerstag, 17. Dezember 2015, 22:21:46 schrieb Caesar Wang:
Kylin-board is based on RK3036 SOCs, add the initiation
version for working.
I've applied:
- patch1 (please include the "rockchip:" part in dts subjects)
- patch3
Hi Yakir
I want to convert drm/rockchip to support atomic api,
I'd like you can do some modify to adapt it.
- Mark
On 2015年11月11日 15:45, Yakir Yang wrote:
Hi guys:
Here are a brief introduction to Innosilicon HDMI IP:
- Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant
On 2015年11月11日 15:46, Yakir Yang wrote:
+ hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+ drm_connector_helper_add(>connector,
+_hdmi_connector_helper_funcs);
+ drm_connector_init(drm, >connector, _hdmi_connector_funcs,
+
On 12/21/15 08:41, Shawn Guo wrote:
> On Wed, Dec 16, 2015 at 04:09:02PM +0200, Igor Grinberg wrote:
>> Hi Shawn,
>>
>> On 12/14/15 04:47, Shawn Guo wrote:
>>> On Mon, Dec 07, 2015 at 09:14:31AM +0200, Ilya Ledvich wrote:
Ilya Ledvich (8):
ARM: dts: imx7d: cl-som-imx7: add basic module
On Fri, Dec 11, 2015 at 01:36:26PM +, Mans Rullgard wrote:
> Add auart4 2-pin configuration on auart0 rts/cts pads.
>
> Signed-off-by: Mans Rullgard
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to
Hi,
This patch depend on GPIOLIB configuration as following:
I modified it with following diff and applied it.
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index ba4db7d..3d89e60 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -54,6 +54,7 @@ config
Hi Caesar,
Am Sonntag, 20. Dezember 2015, 20:49:14 schrieb Caesar Wang:
> Hi Heiko,
>
> 在 2015年12月20日 01:16, Heiko Stübner 写道:
> > Hi Caesar,
> >
> > Am Donnerstag, 17. Dezember 2015, 22:21:46 schrieb Caesar Wang:
> >> Kylin-board is based on RK3036 SOCs, add the initiation
> >> version for
On Wed, Nov 25, 2015 at 10:46:49AM -0800, Curt Brune wrote:
> + /* Check if the ports have an ordering, defined by 'cell-index' */
> + if (((indexp = (u32*)of_get_property(np, "cell-index", )) != NULL)
> &&
> + (len == sizeof(u32)))
> + index = *indexp;
> +
> /*
On Sat, Dec 19, 2015 at 09:39:24PM -0600, Rob Herring wrote:
> On Mon, Dec 14, 2015 at 09:53:05PM +0100, Linus Walleij wrote:
> > According to commit 2503a5ecd86c002506001eba432c524ea009fe7f
> > "ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore
> > boards with L220" Some PB11MPCore
Hello.
On 12/20/2015 05:31 PM, Chanwoo Choi wrote:
This patch depend on GPIOLIB configuration as following:
I modified it with following diff and applied it.
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index ba4db7d..3d89e60 100644
--- a/drivers/extcon/Kconfig
+++
45 matches
Mail list logo