art logic and the card shouldn't be
> left in an unknown state.
>
> So the problem here is not that the system is not being reset (that I
> think that works) but that on reboot, the system is not able to boot
> again since the ROM is not able to read the second stage bootloader.
>
> Mark
ig:
https://raw.githubusercontent.com/tobiasjakobi/odroid-environment/master/sourcecode/system/vanilla-4.3-debug.conf
halt -p works (power goes down to 0W)
reboot does not work, stuck at 0.5W, right after
"systemd-shutdown[1]: rebooting".
reboot did work with 4.3.0-rc3 from above repo (witho
Am Dienstag, 20. Oktober 2015, 21:22:05 schrieb Alim Akhtar:
> On Tue, Oct 20, 2015 at 9:17 PM, Alim Akhtar <alim.akh...@gmail.com> wrote:
> > Hi Markus,
> >
> > On Tue, Oct 20, 2015 at 8:29 PM, Markus Reichl <m.rei...@fivetechno.de>
> > wrote:
> >
ay
with make exynos_defconfig on Odroid U3.
"halt -p" worked (power 0.0W).
"reboot" got stuck at 0.5W.
Without your patch set reboot worked.
Thanks,
--
Markus Reichl
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
linux.am...@gmail.com
Tested-by: Markus Reichl m.rei...@fivetechno.de
This does not look right.
You put this Tested-by since beginning of this patchset (v1) but first
it was LDO10. Then you proposed LDO18 and now you use LDO7 from my
suggestion. Which of this was tested by Markus because I
This patch adds the RGB-LED on XU3 as 3 gpio-leds.
It is derived from hardkernel's 3.10 tree.
Tested-by: Anand Moon linux.am...@gmail.com
Signed-off-by: Markus Reichl m.rei...@fivetechno.de
---
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 24
1 file changed, 24
in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
MarkusTested-by: Markus Reichl m.rei...@fivetechno.de
Best Regards,
---
Markus Reichl
--
To unsubscribe from this list: send the line unsubscribe devicetree in
the body
