Add dt for rk3288 i2s controller, since i2s clock pins and data pins
default to be GPIO, this patch also add pinctrl to mux them.
Tested on RK3288 board.
Signed-off-by: Jianqun Xu <jay...@rock-chips.com>
---
arch/arm/boot/dts/rk3288.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 5950b0a..0e2a815 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -130,6 +130,21 @@
status = "disabled";
};
+ i2s: i2s@ff890000 {
+ compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+ reg = <0xff890000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_clk>;
+ status = "disabled";
+ };
+
uart0: serial@ff180000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0xff180000 0x100>;
@@ -463,6 +478,17 @@
};
};
+ i2s0 {
+ i2s0_clk: i2s0_clk {
+ rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>,
+ <6 1 RK_FUNC_1 &pcfg_pull_none>,
+ <6 2 RK_FUNC_1 &pcfg_pull_none>,
+ <6 3 RK_FUNC_1 &pcfg_pull_none>,
+ <6 4 RK_FUNC_1 &pcfg_pull_none>,
+ <6 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins = <6 20 RK_FUNC_1
&pcfg_pull_none>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
