Hi,
On 10/07/2015 05:01 PM, Stefan Monnier wrote:
@Maxime: How should we handle this? In its current form, the patch applies
only to the BananaPi dts by overriding the inherited opp from the SoC dtsi.
In an earlier discussion, it was said that this can be done, even though it
might not be the mo
Hi Maxime,
Maxime Ripard schrieb am 07.10.2015 19:49:
> Hi Timo,
>
> On Wed, Oct 07, 2015 at 05:49:18PM +0200, Timo Sigurdsson wrote:
>> Hi Kevin,
>> Hi Maxime,
>>
>> Kevin Hilman schrieb am 07.10.2015 16:36:
>>
>> > "Timo Sigurdsson" writes:
>> >> I still think that the lower voltages may be
Hi Timo,
On Wed, Oct 07, 2015 at 05:49:18PM +0200, Timo Sigurdsson wrote:
> Hi Kevin,
> Hi Maxime,
>
> Kevin Hilman schrieb am 07.10.2015 16:36:
>
> > "Timo Sigurdsson" writes:
> >> I still think that the lower voltages may be the cause of your problem
> >> with that specific board, so could yo
Hi Kevin,
Hi Maxime,
Kevin Hilman schrieb am 07.10.2015 16:36:
> "Timo Sigurdsson" writes:
>> I still think that the lower voltages may be the cause of your problem
>> with that specific board, so could you please test the attached patch on
>> top of my patch that you first experienced the probl
"Timo Sigurdsson" writes:
> Kevin Hilman schrieb am 24.09.2015 19:57:
>> kernelci.org started finding boot faiulres[1] on bananapi linux-next
>> around next-20150918, but it was only failing in some labs and not
>> others. I finally bisected it down to this patch, which landed in
>> linux-next i
Hi Timo,
On Mon, Oct 05, 2015 at 07:39:57PM +0200, Timo Sigurdsson wrote:
> Hi Kevin,
>
> Kevin Hilman schrieb am 24.09.2015 19:57:
> > kernelci.org started finding boot faiulres[1] on bananapi linux-next
> > around next-20150918, but it was only failing in some labs and not
> > others. I finall
Hi Kevin,
Kevin Hilman schrieb am 24.09.2015 19:57:
> kernelci.org started finding boot faiulres[1] on bananapi linux-next
> around next-20150918, but it was only failing in some labs and not
> others. I finally bisected it down to this patch, which landed in
> linux-next in the form of 2d665a8a8
On Fri, Sep 25, 2015 at 05:05:58PM +0200, Timo Sigurdsson wrote:
> Hi Kevin,
>
> Kevin Hilman schrieb am 25. Sept 2015 01:57:
>
> > On Tue, Aug 18, 2015 at 8:36 AM, Maxime Ripard
> > wrote:
> >> On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
> >>> sun7i-a20-bananapi.dts doesn't
Hi Kevin,
Kevin Hilman schrieb am 25. Sept 2015 01:57:
> On Tue, Aug 18, 2015 at 8:36 AM, Maxime Ripard
> wrote:
>> On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
>>> sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209
>>> PMU
>>> driver, so add them to allow
On Tue, Aug 18, 2015 at 8:36 AM, Maxime Ripard
wrote:
> On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
>> sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
>> driver, so add them to allow for voltage-scaling with cpufreq-dt.
>>
>> Signed-off-by: Timo Sigur
On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
> sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
> driver, so add them to allow for voltage-scaling with cpufreq-dt.
>
> Signed-off-by: Timo Sigurdsson
Queued, thanks!
Maxime
--
Maxime Ripard, Free Elec
On Mon, Aug 03, 2015 at 03:11:41PM +0200, Hans de Goede wrote:
> Hi,
>
> On 03-08-15 11:47, Maxime Ripard wrote:
> >On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
> >>sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
> >>driver, so add them to allow for vo
On Tue, Aug 04, 2015 at 11:02:24AM +0200, Timo Sigurdsson wrote:
> Hi Maxime,
>
> Maxime Ripard schrieb am 03.08.2015 11:47:
> > What regulator provides the 3.3V regulator used in the rest of this DT
> > then (MMC, GMAC) ?
>
> For GMAC, there is a reg_gmac_3v3 defined in sun7i-a20-bananapi.dts [1
Hi,
On 02-08-15 18:18, Timo Sigurdsson wrote:
sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
driver, so add them to allow for voltage-scaling with cpufreq-dt.
Signed-off-by: Timo Sigurdsson
Thanks for doing this, looks good to me:
Acked-by: Hans de Goede
Regards
Hi Maxime,
Maxime Ripard schrieb am 03.08.2015 11:47:
> What regulator provides the 3.3V regulator used in the rest of this DT
> then (MMC, GMAC) ?
For GMAC, there is a reg_gmac_3v3 defined in sun7i-a20-bananapi.dts [1].
MMC uses reg_vcc3v3 included from sunxi-common-regulators.dtsi. Am I
missing
Hi,
On 03-08-15 11:47, Maxime Ripard wrote:
On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
driver, so add them to allow for voltage-scaling with cpufreq-dt.
Signed-off-by: Timo Sigurdsson
---
Changes s
On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
> sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
> driver, so add them to allow for voltage-scaling with cpufreq-dt.
>
> Signed-off-by: Timo Sigurdsson
> ---
> Changes since v1 (RFC):
>
> - Dropped the ch
sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
driver, so add them to allow for voltage-scaling with cpufreq-dt.
Signed-off-by: Timo Sigurdsson
---
Changes since v1 (RFC):
- Dropped the changes to the cpufreq operating points and renamed the patch
accordingly
- Limited
18 matches
Mail list logo
