On Tue, Apr 28, 2015 at 9:08 PM, Ben Shelton wrote:
> Hi Punnaiah,
>
> On 04/13, Punnaiah Choudary Kalluri wrote:
>> Add driver for arm pl353 static memory controller nand interface with
>> HW ECC support. This controller is used in xilinx zynq soc for interfacing
>> the nand flash memory.
>>
>> S
Hi Punnaiah,
On 04/13, Punnaiah Choudary Kalluri wrote:
> Add driver for arm pl353 static memory controller nand interface with
> HW ECC support. This controller is used in xilinx zynq soc for interfacing
> the nand flash memory.
>
> Signed-off-by: Punnaiah Choudary Kalluri
[...]
> +
> +static
Hi Paul Bolle,
On Tue, Apr 14, 2015 at 12:27 AM, Paul Bolle wrote:
> On Mon, 2015-04-13 at 21:42 +0530, Punnaiah Choudary Kalluri wrote:
>
>> --- a/drivers/mtd/nand/Makefile
>> +++ b/drivers/mtd/nand/Makefile
>
>> +obj-$(CONFIG_MTD_NAND_PL353) += pl353_nand.o
>
> (I think pl353_nand.o can
On Mon, 2015-04-13 at 21:42 +0530, Punnaiah Choudary Kalluri wrote:
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> +obj-$(CONFIG_MTD_NAND_PL353) += pl353_nand.o
(I think pl353_nand.o can be part of a module. If that's incorrect, you
can stop reading here.)
> ---
Add driver for arm pl353 static memory controller nand interface with
HW ECC support. This controller is used in xilinx zynq soc for interfacing
the nand flash memory.
Signed-off-by: Punnaiah Choudary Kalluri
---
Changes in v6:
- Fixed the checkpatch.pl reported warnings
- Using the address cyc
