On Sun, Jun 17, 2012 at 12:02:55PM -0600, Stephen Warren wrote:
> On 06/17/2012 05:51 AM, Roland Stigge wrote:
> > Hi,
> >
> > On 16/06/12 17:06, Stephen Warren wrote:
> >>> +- nxp,typecodes: groups of 2 bits for each of the 16 pins:
> >>> + 0: None
> >>> + 1: LED
> >>> + 2: Beep
> >>> + 3: GP
On Mon, Jun 18, 2012 at 02:25:20PM -0300, Fabio Estevam wrote:
> Nothing shows up in the console after connecting the stick.
>
> Attached my .config file.
>
You haven't enabled the following two in your .config.
CONFIG_USB_CHIPIDEA
CONFIG_USB_CHIPIDEA_HOST
--
Regards,
Shawn
__
On Mon, Jun 18, 2012 at 11:07 PM, Marek Vasut wrote:
>> What should be done in addition to Richard's patch in order to get USB
>> host to work on mx28evk?
>
> Ah right, you need to toggle the power supply (vbus) GPIO.
Toggle it where?
I see the following:
reg_usb0_vbus: usb0_vbus {
compatible
Dear Fabio Estevam,
> Peter,
>
> On Mon, Jun 18, 2012 at 10:14 PM, Chen Peter-B29397
>
> wrote:
> >> Nothing shows up in the console after connecting the stick.
> >>
> >> Attached my .config file.
> >
> > Make sure the vbus is on for your usb port.
>
> So what is the magic needed here? Isn't
Peter,
On Mon, Jun 18, 2012 at 10:14 PM, Chen Peter-B29397
wrote:
>> Nothing shows up in the console after connecting the stick.
>>
>> Attached my .config file.
>>
> Make sure the vbus is on for your usb port.
So what is the magic needed here? Isn't Richard's series supposed to work as is?
Wha
This patch adds a driver for the key scan interface of the LPC32xx SoC
Signed-off-by: Roland Stigge
For the DT binding: Acked-by: Rob Herring
---
Applies to v3.5-rc3
Changes since v4:
* Remove irq from struct lpc32xx_kscan_drv
Changes since v3:
* Make driver DT-only since LPC32xx is converted
This patch adds a driver for the MLC NAND controller of the LPC32xx SoC.
Signed-off-by: Roland Stigge
Signed-off-by: Alexandre Pereira da Silva
---
Applies to v3.5-rc3 + LPC32xx SLC NAND driver (Kconfig + Makefile)
Changes since v8:
* Use of_get_named_gpio() instead of of_get_named_gpio_flags(
Dear Fabio Estevam,
> Hi Richard,
>
> On Wed, Jun 13, 2012 at 9:34 AM, Richard Zhao
>
> wrote:
> > The work is based on ci13xxx rework done by Alexander Shishkin.
> >
> > Status:
> > - this version only support host
> > - usbotg controler works at host role
> >
> > Changes since last versi
Hi Richard,
On Wed, Jun 13, 2012 at 9:34 AM, Richard Zhao
wrote:
> The work is based on ci13xxx rework done by Alexander Shishkin.
>
> Status:
> - this version only support host
> - usbotg controler works at host role
>
> Changes since last version:
> - collect ack received.
>
> Richard Zhao
On 06/18/2012 02:03 AM, Laxman Dewangan wrote:
> Rakesh Kumar wrote at Monday, June 18, 2012 1:11 PM:
> > Stephen Warren wrote:
> >> Now if this means adding a child node under the SDIO controller
> >> to represent the attached device, and storing any settings
> >> required by that device in that c
Hi guys,
not sure why this email didn't go through but let me forward it to mailing list.
Thanks for your comments.
Thanks,
Michal
Original Message
Subject: DTS video mode parameters
Date: Thu, 14 Jun 2012 17:29:02 +0200
From: Davor Joja
To:
CC: Michal Simek , Goran Pantar
11 matches
Mail list logo
