?
And to decide whether it's otg controller or not, the driver read the
capability registers.
A user may wish to restrict even a 'fine otg hw design' to be used in
pure host or device mode. That's where the dr_mode property jumps in.
Lothar Waßmann
Hi,
Shawn Guo writes:
On Sun, May 27, 2012 at 04:11:29AM +0200, Marek Vasut wrote:
Add simple binding for the stmp3xxx-rtc.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Alessandro Zummo a.zu...@towertech.it
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely
Hi,
Dong Aisheng writes:
On Mon, Mar 19, 2012 at 3:02 PM, Grant Likely grant.lik...@secretlab.ca
wrote:
On Mon, 19 Mar 2012 17:49:02 +0100, Lothar Waßmann
l...@karo-electronics.de wrote:
Hi,
Grant Likely writes:
On Mon, 19 Mar 2012 07:54:33 +0100, Lothar Waßmann
l...@karo
Hi,
Grant Likely writes:
On Fri, 16 Mar 2012 11:01:35 +0800, Dong Aisheng aisheng.d...@freescale.com
wrote:
On Thu, Mar 15, 2012 at 07:22:04PM +0800, Lothar Waßmann wrote:
Hi,
Dong Aisheng writes:
On Thu, Mar 15, 2012 at 02:53:29PM +0800, Lothar Waßmann wrote:
Hi
Hi,
Grant Likely writes:
On Mon, 19 Mar 2012 07:54:33 +0100, Lothar Waßmann l...@karo-electronics.de
wrote:
Grant Likely writes:
On Fri, 16 Mar 2012 11:01:35 +0800, Dong Aisheng
aisheng.d...@freescale.com wrote:
On Thu, Mar 15, 2012 at 07:22:04PM +0800, Lothar Waßmann wrote
Hi,
Dong Aisheng writes:
On Thu, Mar 15, 2012 at 07:22:04PM +0800, Lothar Waßmann wrote:
[...]
My proposal is only set the fixed part(first two octets) in board dts file,
each board knows it's value, and read the left 4 octets from OCOTP
dynamically.
The OUI part is three bytes, not two
Hi,
Dong Aisheng writes:
On Thu, Mar 15, 2012 at 02:53:29PM +0800, Lothar Waßmann wrote:
Hi,
Dong Aisheng writes:
On Wed, Mar 14, 2012 at 10:16:43PM +0800, s.ha...@pengutronix.de wrote:
On Wed, Mar 14, 2012 at 08:45:23PM +0800, Dong Aisheng wrote:
On Wed, Mar 14, 2012 at 01:23
someone used '=' instead of '=='.
You should make it clear that that's not the case like:
| while ((child = of_get_next_child(np, child)) != NULL)
Lothar Waßmann
--
___
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
have no errata.
Fortunately there is an i2c-gpio driver that can be used on the
corresponding pins. ;-)
Lothar Waßmann
--
___
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Hi,
Shawn Guo writes:
On Mon, Jul 11, 2011 at 09:15:34AM +0200, Lothar Waßmann wrote:
Hi,
Shawn Guo writes:
spi_imx_devtype_data has already been driver private data. There is
really no need to make a copy in spi_imx_data. Instead, a reference
pointer works perfectly fine
needed and discard everything else
after initialisation.
Lothar Waßmann
--
___
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag
11 matches
Mail list logo