Has anyone else had trouble with fldigi and the 746pro ? I have tried every
combo, but still wont work. I am using the latest version. I did have it
working, but when I closed the program and came back it quit and can't get it
back. Just curious if fldigi wont work with the 746pro as it i
I recently purchased a Signalink USB interface which works fine all
but, no audio to the rig. This was also a problem with my last
interface that didn't use a USB port bit rather the computer sound
card. The rig is 746 pro connected via the data jack. Any one else
have any ideas before I ha
Thanks to all who replied to my question. I have now got power out
but the alc cannot be adjusted with the sound sliders. The meter on
the 746Pro shows as much alc as power. I am using the computer
soundcard ( Realtek ). The computer is HP 1.6ghz and G3ZLY dual usb
interface with Mixw. Could
I have tried everything I can think of and cannot get the 746 to
transmit. The audio from my speakers sounds perfect with no
distortion etc, but no transmitting. The card is the computer card
Realtek and I also tried with a USB external card, still no luck. Am
I missing something here ? If anyo
digitalradio@yahoogroups.com, "W2ZEY" <[EMAIL PROTECTED]> wrote:
>
> Could you provide some details about the set up, i.e. the computer,
interface, radio, etc.? Thanks.
>
>
>
> 73 / Larry / W2ZEY
>
>
>
> _
>
> From: digitalradio@yahoogroups.com
[
Forgive me if this is the wrong place to ask this. When opening a
digital program I get a lot of noise. It covers all but the strongest
signals but is not present in the receiver when the computer has
anything else on including the internet home page. Anyone have any
ideas? Help would be apprec
---
I just copied a partial picture om 7033.99. Couldnt make it all
out but the word Guatemala was definetly there. Maybe a TG9 ?
Mike K9HCK
In digitalradio@yahoogroups.com, "Andrew O'Brien" <[EMAIL PROTECTED]>
wrote:
>
> What is this mode ?
>
> http://www.obriensweb.com.unid.m
--- In digitalradio@yahoogroups.com, "mac2251" <[EMAIL PROTECTED]> wrote:
>
> Anyone know what the signal is on 14071.944 ? It runs about S8 with
> some qsb, and sounds like high speed clicking noise. Hope its not a
> local problem. Mike K9HCK
>
Its
Anyone know what the signal is on 14071.944 ? It runs about S8 with
some qsb, and sounds like high speed clicking noise. Hope its not a
local problem. Mike K9HCK
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflector : http://grou
---
I want the audio to copy cw. I can control the remote computer
and the rig, but I want the audio to copy cw in my head. It worked
fine without the audio in the ANARTS rtty contest this weekend...Mike
K9HCK
In digitalradio@yahoogroups.com, John Becker <[EMAIL PROTECTED]> wrote:
Thanks to all who answered my questions especially W1MNK and N9VV.
I have Teamspeak on both computers and get the voice announcement
that the link is connected but still no audio. Anyone have any
experience with remote audio, I'm sure I have something configured
wrong but don't know where to s
Has anyone had any luck using VNC or Windows XP remote? I have both
working except I cannot get the audio to the receiving pc. Anyone
else tried either of these and have any luck with the audio ? Mike
K9HCK
Yahoo! Groups Sponsor ~-->
Protect
--- In digitalradio@yahoogroups.com, "mac2251" <[EMAIL PROTECTED]> wrote:
>
> I purchased a new HP computer and installed MixW and N1MM logger.
> The CAT works fine and the receive is fine but no transmit. Speakers
> connected to my outboard sound card have transm
I purchased a new HP computer and installed MixW and N1MM logger.
The CAT works fine and the receive is fine but no transmit. Speakers
connected to my outboard sound card have transmit tones but the 746
shows no power out. I have tried all the settings I can think of but
nothing works. It was
I am trying to get a USB to serial port adapter installed on my pc
running Windows 98se. It shows up in device manager in the com ports
but without a port number. I have installed it on 2 other of my pcs
and both show up on com port 3. Anyone know if there is a fix for
this particular pc?..
Forgive me if this has been covered before, but I couldn't find in
the archieves. I am trying to use USB or LPT ports for rig control
etc. My question is how do I set the particular program to use these
ports when all that is listed is COM ports. I am sure there is a
simple answer but not being
I have a question concerning cw using MixW or Hamscope. Is it legal or
not? I have heard both sides. Anyone have the facts.Mike K9HCK
The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yah
.I recentkly got a hard key interface. My computer has 2 db9
connectors but one is damaged and the other is being used by my
Rigblaster. Is there any way to use the interface with another
connector? I have db9 to db25 cable. Any help would certainly be
appreciatedMike K9HCK
The
Thanks to Skip and Ed for the replies. I found the problem and it
seems to be working fine now. Thanks again..Mike K9HCK
The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/
Does anyone have a USB audio adapter and how did they get it to
transmit? Mine works great for receiving but won't transmit. I
must be missing something obvious. Any help would be
appreciated...Mike K9HCK
The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.19
...Are we having a solar storm or did my antennas come down? I
cannot hear much of anything...Mike K9HCK
The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/
http://dxcluster.blogspot.com";>http://feeds.feedburner.com/DigitalSpotter.gif"; height="67" width="200"
style="bord
21 matches
Mail list logo