t: Re: [digitalradio] NBEMS HF testing frequency suggestion
Omar, good evening.
It is a program that uses PSK (31, 63, 125, 250) . It can use regular PSK
for keyboard chats but you can also decide to use PSK with ARQ if you want to
send a text file or email where accuracy is important.
Calling CQ using NBEMS on 14073 + 1000 hz. Will try to go to FLARQ if
anyone using NBEMS copies.
Howard K5HB
Oh dear, fist trial with NBEMS was not a happy one, for me, I'm afraid...
Appart from not knowing my way round the program, which is not the fault
of the program of course, I also had terrible trouble with it missing
keystrokes.
Either it gave lowercase where I wanted uppercase, or it missed sp
I'm just jumping on the NBEMS bandwagon and am wondering if there's a
dedicated place for asking about NBEMS technical issues other than this
list.
Thanks,
John W2KI
NBEMS - Narrow Band Emergency Messaging System
Is anyone familiar with this mode? What type of equipment is needed?
I have an MFJ-1250C. Will this work with this or will I need a different type
of interface?
Thanks!
Rod
KC7CJO
I'm trying to follow the instructions in
VBdigi under Help->Radio email setup.
I navigate to C:\NBEMS\Mail
I put the mouse pointer on the ARQout folder and
hold down the right mouse button and try to drag
it to the menu bar at the bottom of the screen, and
I get the slashed-circle "not" symbol.
Dave,
Do not try to type at the same time you are linked with another station,
because flarq is going to be sending keystrokes to VBdigi, often at the same
time as you try to type. As you point out, NBEMS is a messaging system, not
a chat system. It is also primarily for 2m emergency messaging,
kh6ty wrote:
> Dave,
>
> Do not try to type at the same time you are linked with another station,
> because flarq is going to be sending keystrokes to VBdigi, often at the same
> time as you try to type. As you point out, NBEMS is a messaging system, not
> a chat system. It is also primarily for
I went ahead today and lashed up a temporary set up so I can key up my
old Kenwood TS-440SAT from my sound card. I don't have separate PTT COM
serial port keying (only CI-V rig control not supported by this
software) and so can not use my ICOM 756 Pro 2 for now.
The 440 seems to test fine with
Looking forward to trying the software. Have it installed using sylpheed
software rather than Microsoft outlook express.
The way this sets up, it would be a simple matter to move messages from the
internet to the outbox using flarq is pass the traffic
Hope that I can find Sholto or Terry (or
Testing NBEMS 30M 10140 PSK31 flarq beacon as of 1400Z
John
VE5MU
I have VBDIGI/FLARQ up and running,and there has been a lot of posts
about 30m frequencies.
I do not have a 10Mh antenna so would like to know of frequencies for 14
and 7Mh, so that I can monitor/beacon in the right spots.
Kevin VK5OA
--- In digitalradio@yahoogroups.com, "kh6ty" <[EMAIL PROTECTED]> wrote:
>
> Need a PSK31 channel in addition to the picture channel, both at the
same
> time. That way one could communicate while the picture was being
sent, and
> would be more like a QSO conversation IMHO. The next release of NB
Deschutes County ARES
- Original Message -
From: Rodney
Subject: [digitalradio] NBEMS
NBEMS - Narrow Band Emergency Messaging System
Is anyone familiar with this mode? What type of equipment is needed?
I have an MFJ-1250C. Will this work with this or will I need a diffe
Rodney,
The same interface you use for PSK31 will work. NBEMS is a software
suite. Go to www.w1hkj.com/NBEMS and download the software for your
windows or Linux version.
Skip KH6TY
NBEMS Development Team
Rodney wrote:
>
>
>
> NBEMS - Narrow Band Emergency Messaging System
>
>
> Is anyo
tool box is the
highspeed digital and data ARQ for VHF emcomm and with flidigi software you
dont need a external piece of hardware for the ARQ.
Matt
--- On Fri, 7/31/09, Rodney wrote:
From: Rodney
Subject: [digitalradio] NBEMS
To: digitalradio@yahoogroups.com
Date: Friday, July 31, 2009, 2:
ot;
-- Winston Churchill
Rodney
KC7CJO
Clackamas County Electronic Services, Radio Shop
Electronics Tech 1
--- On Fri, 7/31/09, kh6ty wrote:
From: kh6ty
Subject: Re: [digitalradio] NBEMS
To: digitalradio@yahoogroups.com
Date: Friday, July 31, 2009, 8:44 AM
Rodney wrote:
>
>
> NBEMS - Narrow Band Emergency Messaging System
>
>
> Is anyone familiar with this mode? What type of equipment is needed?
I have another question along these lines.
How is it used?
How does the ham community coordinate what frequencies
are used for emergency messag
elf into prosperity is like
a man standing in a bucket and trying to lift himself up by the handle."
-- Winston Churchill
Rodney
KC7CJO
Clackamas County Electronic Services, Radio Shop
Electronics Tech 1
--- On Fri, 7/31/09, Rik van Riel wrote:
From: Rik van Riel
Subject: Re
ftrag von Rik van Riel
Gesendet: Freitag, 31. Juli 2009 23:54
An: digitalradio@yahoogroups.com
Betreff: Re: [digitalradio] NBEMS
Rodney wrote:
>
>
> NBEMS - Narrow Band Emergency Messaging System
>
>
> Is anyone familiar with this mode? What type of equipment is neede
Just tried for a second time, and get the same results when trying to
boot from the CD. It loads to a point, then stops, with an error
message that says:
Error, cannot find Puppy on 'cd' boot media.
PUPMODE=1 PDEV1=
Exited to initial-ramdisk(initramfs)commandline...
(the Linux-guru can now debug
>I'm trying to follow the instructions in
>VBdigi under Help->Radio email setup.
>I navigate to C:\NBEMS\Mail
>I put the mouse pointer on the ARQout folder and
>hold down the right mouse button and try to drag
>it to the menu bar at the bottom of the screen, and
>I get the slashed-circle "not" sy
http://w1hkj.com/FlarqHelpFiles/flarq.html
73 de LA5VNA Steinar
always use VOX for PTT if you use the mic input of the
transceiver.
Skip KH6TY
- Original Message -
From: "Rick" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>;
Sent: Thursday, January 03, 2008 4:45 PM
Subject: [digitalradio] NBEMS problem
>I went ahead today
Hi Skip,
I have not been able to display anything on the waterfall for receive
and no random printing to the screen from noise either.
Same thing with both rigs on receive (I can't TX with the Pro 2 since no
rig control to CI-V).
Both sound cards were tried for both programs, switching back and
is anything on the
waterfall.
I've never run into such a problem, so it must be easy to track down.
I'll look for your email
Skip
- Original Message -
From: "Rick" <[EMAIL PROTECTED]>
To:
Sent: Thursday, January 03, 2008 6:10 PM
Subject: Re: [digitalradio]
on the
> waterfall.
>
> I've never run into such a problem, so it must be easy to track down.
>
> I'll look for your email
>
> Skip
>
>
> - Original Message -
> From: "Rick" <[EMAIL PROTECTED]>
>
> To:
> Sent:
Hi Andy,
We have been trying to isolate the problem, but no luck as yet. I do of
course use SC #2 since my SB Live! card is the secondary card.
(Naturally, I tried all kinds of other combinations too just in case,
but no luck there). Other programs, including Digipan, and even programs
I have
Rick wrote:
> When you loaded your software, did you get a warning that a file was
> newer on your computer and that it recommended you keep the file? In my
> case it was one of the system32 files: MSCOMCTL.OCX.
>
>
Yes, that is a known issue. You should have kept the newer file.
Dave (G0DJ
Andrew O'Brien wrote:
> It makes sense to me.
>
> If you have TWO soundcards set in your PC, you need to tell VBdigi the
> soundcard settings you want to use. I have the same setting as you, I
> have an internal motherboard based souncard and a Creative PCI card.
> The "default" Windows souncard i
I definitely kept the newer file, of course. My question was asking the
reverse, as maybe in some cases, the ones not having problems were the
ones who did not have the newer file on their computer. The newer
directX support apparently takes care of the older OCX OLE structure.
From what Skip
Where and when is the testing of NBEMS and Flarq going on? I would like to
do some testing from here.
73
Ted W4ZE
Port St Lucie, FL
From: "Kevin O'Rorke" <[EMAIL PROTECTED]>
To: "Digital Radio"
Sent: Saturday, January 05, 2008 11:10 PM
Subject: [digitalradio] NBEMS Frequencies.
>I have VBDIGI/FLARQ up and running,and there has been a lot of posts
> about 30m frequencies.
> I do not
Several of us were around the 10137 frequency earlier today and tried
various combinations of modes, including NBEMS. We had at least KH6TY,
K3UK, VE5MU, KC7GNM, and WD4KPD. Some attempts at making transfers was
done. I sent Skip one of my standard messages which is the Gettysburgh
Address. It
To minimize interference to others and to have the most success with NBEMS, we
wish for everyone to follow the prescribed contact procedure for using NBEMS.
Here is an except from the Help in the Flarq application:
Initiating an ARQ connect session
Start by sending a 'CQ NBEMS' or some similar
--- On Fri, 7/31/09, postmaster (do1fwm) wrote:
From: postmaster (do1fwm)
Subject: AW: [digitalradio] NBEMS
To: digitalradio@yahoogroups.com
Date: Friday, July 31, 2009, 3:10 PM
genau deine fragen!
NBEMS - Narrow Band Emergency Messaging System (schon wieder
Sorry for the tardy reply but I only receive a daily synopsis from this group.
If you need help with any aspect of running the NBEMS suite (fldigi, flarq,
wrap) you will receive a more timely response by posting your questions and
problems on the yahoo group dedicated to it's support:
nbems...@
Are you burning the download as a ISO image Dave ?
On 10/20/07, Dave <[EMAIL PROTECTED]> wrote:
>
> Just tried for a second time, and get the same results when trying to
> boot from the CD. It loads to a point, then stops, with an error
> message that says:
>
> Error, cannot find Puppy on 'cd'
Sure am. As I said, it begins the normal boot process typical of a
Linux OS, but errors out after a bit.
I did two separate downloads and burned two separate CDs, and each
shows exactly the same results.
73
Dave
KB3MOW
Andrew O'Brien wrote:
Are you burning the download as a ISO imag
Ted,
I am beaconing on 10.138Mhz (10.137+1Khz) psk63 now. I see there are a
couple of Propnet stations beaconing using psk31 on the same frequency.
Darrel, VE7CUS
On 4-Jan-08, at 6:11 AM, Ted Huf wrote:
Where and when is the testing of NBEMS and Flarq going on? I would
like to do some
So, anyone up to try these out on 30 or 20M? presently on 30
17:30Z
John
VE5MU
uency.
I'll be watching 30m now and will be available for some NBEMS ARQ file
transfers.
73, Skip KH6TY
- Original Message -
From: "Andrew O'Brien" <[EMAIL PROTECTED]>
To:
Sent: Friday, January 04, 2008 6:12 PM
Subject: Re: [digitalradio] NBEMS/Flarq Frequenc
I think it might make sense to use the SAME frequencies as Propnet. This
may make no sense at all to others, so what do you think. I would not want
to interfere with Propnet beacons since they perform a valuable service,
but if we are going to beacon, perhaps we should use the same frequency but
> I'll be watching 30m now and will be available for
> some NBEMS ARQ file
> transfers.
>
> 73, Skip KH6TY
>
>
> - Original Message -
> From: "Andrew O'Brien" <[EMAIL PROTECTED]>
> To:
> Sent: Friday, January 04, 2008 6:12 PM
>
Aren't the PropNet operators monitoring their transmissions? Here in the
U.S. beacons are not permitted below the 10 meter band except for the
special international beacons. I realize that there are scofflaws (or
worse) operating outside the rules, but it does not seem wise to promote
this unle
are you!
Skip
- Original Message -
From: "Rick" <[EMAIL PROTECTED]>
To:
Sent: Friday, January 04, 2008 7:29 PM
Subject: Re: [digitalradio] NBEMS/Flarq Frequencies
> Aren't the PropNet operators monitoring their transmissions? Here in the
> U.S. beacons are no
Being so close to another net frequency is not going to work unless you
provide a proper filter.
Using flarq efficiently you need to
* use a 500 Hz filter or better
* use a distance of 500 Hz.
We have tried to put 2 pskmail servers on a 250 Hz distance but they
qrm'ed each other in such a way t
While in the shack today, I will be FLARQing on 10137 plus 1000 HZ AF.
Andy K3UK FN02hk
On Jan 5, 2008 4:02 AM, Rein Couperus <[EMAIL PROTECTED]> wrote:
> Being so close to another net frequency is not going to work unless you
> provide a proper filter.
>
> Using flarq efficiently you need to
> *
This rather surprises me as I can normally decode PSK31 stations right
next to each other with no problems at all. Even if they are almost
touching each other on the waterfall. And that is using a very wide
filter, typically voice bandwidth, unless I have some very strong
signals that is desens
Most of your questions are answered here:
http://pskmail.wikispaces.com/PSK_arq
73,
Rein PA0R
> -Ursprüngliche Nachricht-
> Von: digitalradio@yahoogroups.com
> Gesendet: 07.01.08 02:37:18
> An: [EMAIL PROTECTED]
> Betreff: [digitalradio] NBEMS e
I wrote an article today about NBEMS for my website... Would someone more
familiar with NBEMS look it over and make sure I got my facts straight, and
didn't anything important out?
Appreciate! - Comment here or in an eMail if you prefer.
73 DE Charles Brabham, N5PVL
Prefer to use radio for yo
Aside from 6M and 2M , where I had good results with NBEMS, I am
anxious to try it on HF. I will assume that the low bands will make
fast PSK too difficult but PSK125 and 63 with ARQ is worth testing on
HF. NBEMS has a nice bacon feature , and a beacon feature too. I
would like to suggest a 2
The NBEMS development team is pleased to announce the availability of a
Windows NBEMS software suite for beta testing.
The NarrowBand Emergency Messaging System (NBEMS) for Windows is a suite of
software programs designed for point-to-point, fast, error-free, emergency
messaging up to or over 1
John I just started my beacon on 10.137 .I have on
message to send.
Russell
--- John Bradley <[EMAIL PROTECTED]> wrote:
> So, anyone up to try these out on 30 or 20M?
> presently on 30
>
>
>
> 17:30Z
>
>
>
> John
>
> VE5MU
>
>
=
IN GOD WE TRUST !
=
Charles,
Where is the article? I looked at the hamradionet.org site and didn't
see it posted there.
73
-Josh KD7PAJ
> I wrote an article today about NBEMS for my website... Would someone more
> familiar with NBEMS look it over and make sure I got my facts straight, and
> didn't anything impo
communications? - Stop by at
HamRadioNet.Org !
http://www.hamradionet.org
- Original Message -
From: "Josh Gibbs"
To:
Sent: Saturday, November 14, 2009 9:47 PM
Subject: Re: [digitalradio] NBEMS Article at USPacket
> Charles,
>
> Where is the article? I looked at the hamra
PROTECTED] On
Behalf Of Andrew O'Brien
Sent: Thursday, October 18, 2007 8:35 PM
To: DIGITALRADIO
Subject: [digitalradio] NBEMS HF testing frequency suggestion
Aside from 6M and 2M , where I had good results with NBEMS, I am anxious to
try it on HF. I will assume that the low bands will make fas
erriam K5RUD
> ARES AEC Montgomery County, TX
> http://TheHamNetwork.net
>
>
> -Original Message-
> From: digitalradio@yahoogroups.com [mailto:[EMAIL PROTECTED] On
> Behalf Of Andrew O'Brien
> Sent: Thursday, October 18, 2007 8:35 PM
> To: DIGITALRADIO
> Sub
@yahoogroups.com [mailto:[EMAIL PROTECTED] On
Behalf Of Andrew O'Brien
Sent: Thursday, October 18, 2007 8:35 PM
To: DIGITALRADIO
Subject: [digitalradio] NBEMS HF testing frequency suggestion
Aside from 6M and 2M , where I had good results with NBEMS, I am anxious to
try it on HF. I will a
Folks,
What is NBEMS please?
Omar YK1AO
- Original Message -
From: Rick
To: digitalradio@yahoogroups.com
Sent: Saturday, October 20, 2007 4:52 AM
Subject: Re: [digitalradio] NBEMS HF testing frequency suggestion
I too downloaded the .iso yesterday and immediately
Narrow Band Emergency Messaging System (NBEMS)
Darrel VE7CUS
On 21-Oct-07, at 8:18 AM, Omar Shabsigh wrote:
Folks,
What is NBEMS please?
Omar YK1AO
t;[EMAIL PROTECTED]> wrote:
>
>Folks,
>
> What is NBEMS please?
>
> Omar YK1AO
>
>
> - Original Message -
> *From:* Rick <[EMAIL PROTECTED]>
> *To:* digitalradio@yahoogroups.com
> *Sent:* Saturday, October 20, 2007 4:52 AM
> *Subject:*
t;
> Omar YK1AO
>
>
> - Original Message -
> *From:* Rick <mailto:[EMAIL PROTECTED]>
> *To:* digitalradio@yahoogroups.com
> <mailto:digitalradio@yahoogroups.com>
> *Sent:* Saturday, October 20, 2007
On Jan 1, 2008 9:23 PM, kh6ty <[EMAIL PROTECTED]> wrote:
>
>
>
>
>
>
> The NBEMS development team is pleased to announce the availability of a
> Windows NBEMS software suite for beta testing.
>
> The NarrowBand Emergency Messaging System (NBEMS) for Windows is a suite of
> software programs desi
7072 (VFO) PSK63 FLARQ beacon every 60 seconds with VBdigi NBECS
ANdy K3UK
Nice work, Skip! Congrats!!!
73,
Dave, AA6YQ
-Original Message-
From: digitalradio@yahoogroups.com [mailto:[EMAIL PROTECTED]
Behalf Of kh6ty
Sent: Tuesday, January 01, 2008 9:24 PM
To: digitalradio@yahoogroups.com
Subject: [digitalradio] NBEMS available for beta testing
Andrew O'Brien wrote:
On Jan 1, 2008 9:23 PM, kh6ty <[EMAIL PROTECTED]> wrote:
The NBEMS development team is pleased to announce the availability of a
Windows NBEMS software suite for beta testing.
I have downloaded NBEMSsetup and unzipped to a temp folder
Any attemp
Kevin,
I think you can trust this setup.exe. It is a Microsoft-generated
installation program that only adds a few Microsoft DLL's to your system and
installs the program files we have created. I'd go ahead and make an
exception for this particular setup.exe.
Skip
KH6TY
> ZoneAlarm Securit
- Original Message -
From: "kh6ty" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, January 01, 2008 8:23 PM
Subject: [digitalradio] NBEMS available for beta testing
> The NBEMS development team is pleased to announce the availability of a
> Windows NBEMS software suite f
Hi Skip,
Just a minor note, some of the Microsoft libraries (dll's) you reference in
the program are older versions. I think you might need to download Visual
Studio SP6B, update the references and recompile? That should stop the "The
file being copied is older than the one presently on your syste
FWIW I always link using MFC in a static library - this way I never need to
ship possibly conflicting DLL's.
Downside - program can be larger, upside - less problems with user support
which can chew up time.
Simon Brown, HB9DRV
- Original Message -
From: "Sholto Fisher" <[EMAIL PROTEC
CTED] Behalf Of *kh6ty
> *Sent:* Tuesday, January 01, 2008 9:24 PM
> *To:* digitalradio@yahoogroups.com
> *Subject:* [digitalradio] NBEMS available for beta testing
>
> The NBEMS development team is pleased to announce the availability of a
> Windows NBEMS software suite for beta testin
Hi Andy,
7072 is not best the freq in my part of the world . Heavy QRM from SSB.
But I will try copy you
of course ;)
73 de LA5VNA Steinar
Andrew O'Brien skrev:
>
> 7072 (VFO) PSK63 FLARQ beacon every 60 seconds with VBdigi NBECS
>
> ANdy K3UK
>
>
Steinar Aanesland wrote:
> Hi Andy,
>
> 7072 is not best the freq in my part of the world . Heavy QRM from SSB.
> But I will try copy you
> of course ;)
>
> 73 de LA5VNA Steinar
>
OK, I've got NBEMS running, and decoding signals on 20M, and I've run
FLARQ and the file folders appear to be OK.
There was a very nice comment in Steve Ford's Electic Technology column
about NBEMS.
He mentions that it is a suite of Windows sound card programs allowing
ARQ exchanges of messages, but one of the compelling features of fldigi
and flarq which make up the suite of programs, is that they work cr
KV9U wrote:
> He mentions that it is a suite of Windows sound card programs allowing
> ARQ exchanges of messages, but one of the compelling features of fldigi
> and flarq which make up the suite of programs, is that they work cross
> platform. No other software of this type has this capability to
Skip,
White noise tests show DominioEX-4 to be a bit more sensitive than MFSK16,
but it doesn't seem to handle HF distortion nearly as well.
I was surprised that it did better than MFSK16 with multipath and was
wondering if you thought the better throughput was due to MFSK16 tuning
issues rath
Hello all,
I just wanted to drop an example of our digital net traffic here using
NBEMS/FLDIGI software.
Skeds and info at www.wpaNBEMS.org. Modes used are Olivia 8/500 for keyboard to
keyboard and short messages such as NTS and MT63 1k Long Interleave for spread
sheets, bulletins, book traffi
There is an interesting article in August QST, pages 73 - 74, about the NBEMS
(Narrow Band Emergency Messaging System) software.
NBEMS can be used to transmit bulletins & binary files using the MT63 digital
data mode over FM simplex or repeaters using accoustical coupling. There is
no need for
79 matches
Mail list logo
