Tex82 wrote:
> Thanks a lot, problem solved I installed wrong plugin!
>
> Is it possible to show these information through the touch screen
> display?You access the information from the context menu. Artist Info, Album
Info and Lyrics.
Sent from my Pixel 3a using Tapatalk
Okay so I ordered 3x TP-Link AC750 WiFi Extender, and a 50' ethernet
cable and i'm going to wire 1, use bridge mode on extenders to wire 3,
and will report back how they operate.
They're coming tomorrow!
1 Touch
5 Receivers
3 Controllers
2 Radios
Making streaming music in my home a full time
Thanks a lot, problem solved I installed wrong plugin!
Is it possible to show these information through the touch screen
display?
Tex82's Profile: http://forums.slimdevices.com/member.php?userid=72483
View this thread: ht
FredFredrickson wrote:
> The units are on different circuits so I think that rules out that
> option. Also, do you need a 1-to-1 on those? If I want to hook up 4
> devices would i need to occupy 8 outlets?You would need 5 not 8 but if the
> units are on different phases they
wouldn't help.
Se
Tex82 wrote:
> Hi to all.
>
> I just reinstalled Picore Player + LMS on my RPI4. Everything ok, touch
> screen as well. but installing "The song info plugin" the icon for
> song info doesn't appear anymore on the web interface. How can I solve
> the issue? Tried to delete and reinstall the
RobbH wrote:
> Someone suggested HomePlug, aka powerline networking. Have you
> considered that? Depending on the wiring in your house, it might be an
> option.
The units are on different circuits so I think that rules out that
option. Also, do you need a 1-to-1 on those? If I want to hook up 4
Hi to all.
I just reinstalled Picore Player + LMS on my RPI4. Everything ok, touch
screen as well. but installing "The song info plugin" the icon for
song info doesn't appear anymore on the web interface. How can I solve
the issue? Tried to delete and reinstall the plugin several time with n
Hi solved reinstalling everything form zero.
Thanks. Alessandro
Tex82's Profile: http://forums.slimdevices.com/member.php?userid=72483
View this thread: http://forums.slimdevices.com/showthread.php?t=116128
_
FredFredrickson wrote:
> Wired is more of a challenge as this old home just doesn't have the
> flexibility for it.
Someone suggested HomePlug, aka powerline networking. Have you
considered that? Depending on the wiring in your house, it might be an
option.
LMS 8 nightly running on Raspbe
FredFredrickson wrote:
> .I think i'm going to try getting a handful of these and connect to the
> ethernet ports: https://www.amazon.com/gp/product/B093WZ15FR/
>
> Unless anybody has a better recommendation on brand?
I have no experience with them but some people are using vonets for the
radi
Redrum wrote:
> what did the touch do that was one step better?
Don't know - never looked at differences between the two. I suppose
compromises were made to enable running on battery with a reasonable
duration - but it may be something as simple as antenna
design/placement (and no speaker).
markiii wrote:
> all depends on your access. I also hardwire if i can
The wifi coverage is great. I have fire tv sticks in almost the same
place as each receiver, and they get perfect signal.
Wired is more of a challenge as this old home just doesn't have the
flexibility for it.
1 Touch
5 R
Redrum wrote:
>
> with all of the discussion with sb radio wireless issues, what did the
> touch do that was one step better? They seem to be more...stable. It
> seems like there is allot of very recent radio issues. I'm fairly rural,
> so I don't see it.
>
> Jim
Which is a shame as the Radio
bpa wrote:
> Strong signal does not necessarily mean a good quality signal.
> I think there is a lot more "noise" at the edges of channels due to new
> tech/faster standards and so old chips find it hard to decode their data
> stream even from a strong signal.
right, which is why I used "seemi
all depends on your access. I also hardwire if i can
PiCorePlayer 7.1 on Allo Digi One Signaturewith (Lounge)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry Dig+
(Office)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry
DAC+(Kitchen)
Radio (Bedroom)
PiCorePlayer 8.1 wi
bpa wrote:
> At night, lots of thing happen. Power save modes means lower tx/rx
> power, greater interference from neighbours etc., DHCP IP lease
> expire/renew etc.
>
>
>
> Certainly old chips were designed in the expectation of how radio
> bandwidth was being used and that has changed radi
Redrum wrote:
> I (and others) had receiver wifi problems even with a seemly strong
> signal.
Strong signal does not necessarily mean a good quality signal.
I think there is a lot more "noise" at the edges of channels due to new
tech/faster standards and so old chips find it hard to decode the
FredFredrickson wrote:
> I don't want to speak too soon but usually the receivers drop off
> overnight and since my wired test started, it's still going strong.
At night, lots of thing happen. Power save modes means lower tx/rx
power, greater interference from neighbours etc., DHCP IP lease
ex
FredFredrickson wrote:
> .
> I don't want to speak too soon but usually the receivers drop off
> overnight and since my wired test started, it's still going strong. .
I (and others) had receiver wifi problems even with a seemly strong
signal. It also seemed (to me) that the receiver would just
bpa wrote:
> Channel 3 is not a good channel to use as it overlaps with channel
> 1,2,4,5 & 6 and this is just with 20MHz - with bonding at 40MHz and it
> is even worse. So other networks on neigbouring channels can interfere
> with your network and reduce quality of signal - a strong signal do
Cipri wrote:
> Hi Joe,do you have an extra display for Logitech Boom? Thank you
Sure, please drop me a PM with your e-mail address and location and I'll
send you an offer.
Cheers,
Joe
PN me if your Boom / Classic / Transporter display has issues!
Blog:
https://www.blogger.com/blogger.g?rinl
mandryka wrote:
> Thanks to everyone for at least -trying -to help!
Are you sure it fails to go to sleep - or could it be that it does go to
sleep and then immediately wakes?
I have it working fine and sleeping well on Windows 10 and I've used it
like that for years. I have had problems where
Hi Joe,do you have an extra display for Logitech Boom? Thank you
Cipri's Profile: http://forums.slimdevices.com/member.php?userid=72680
View this thread: http://forums.slimdevices.com/showthread.php?t=107535
_
FredFredrickson wrote:
>
>
> The touch is the only one that doesn't disconnect for me.
>
> Both the receivers and radio require rebooting almost daily. The
> touch is weekly
At first I thought it was very telling (wifi as @w3w and @bpa suggest)
that the radio and receivers are the prob
FredFredrickson wrote:
> My 2.4 ghz wifi is on channel 3 and I can confirm with wifi analyzer
> there's nothing else on the channel. I can also confirm I've used other
> channels and other WiFi routers. This issue has been constant for years
> and I've mostly just ignored it.
Channel 3 is not a
25 matches
Mail list logo
