Mark Lanctot;408326 Wrote:
Sounds like it then, though this is the first time I've heard of it.
And you know that the remote is transmitting IR? You've looked at it
in a darkened room with a digital camera?
I don't know how or why, but after a couple of months without response
it started
Mark Lanctot;408026 Wrote:
Maybe your IR receiver isn't working? Go to SqueezeCenter Settings -
Advanced - Logging and enable (player.ir) - Infrared Activity Map
Parsing. Press some buttons on the remote and then open the
SqueezeCenter log file near the bottom of Settings - Information.
sd2100;408318 Wrote:
There isn't any warrenty any longer. With the big discounts on SB3
nowadays repair would be overkill.
The SC isn't receiving anything. Could it be the IR receiver in the
box? The box hasn't been exposed to any damage - it just stopped
working proberly and one day it
My problems is, that the Classic don't respond to the remote. I've
received a new remote, so the problem isn't there. The Classic just
shows the time :-( It is however possible to control the unit via
Squeezecenter!
Any ideas what could be the problem and how to fix it?
--
sd2100
sd2100;407993 Wrote:
My problems is, that the Classic don't respond to the remote. I've
received a new remote, so the problem isn't there. The Classic just
shows the time :-( It is however possible to control the unit via
Squeezecenter!
Any ideas what could be the problem and how to fix
It's working now, might be an intermittent problem. The remote does
light up, thanks for the digi camera in a dark room trick. The odd
thing is that after I originally posted this problem the unit started
to work but without the update firmware message. Then the next day the
update message was
tomkiki;405736 Wrote:
However, the classic needs to be upgraded, as the screen is showing the
press brightness button to start upgrade (or something like that).
Well the unit will not respond to the remote, I changed the batteries
but that did not help.
Maybe the classic is unresponsive as
The old Slim Devices remote used to develop problems in the solder to
the IR emitter sometimes, easily solved by re-soldering the connection
from the emitter to the circuit board if you know how to solder and can
pry the thing open.
However I haven't heard of this problem with the new Logitech
I have a duet and a classic. The duet remote works fine, it can control
both units with it. However, the classic needs to be upgraded, as the
screen is showing the press brightness button to start upgrade (or
something like that). Well the unit will not respond to the remote, I
changed the
