Re: [slim] Harmony Remote and Power Cycling SB3

2008-02-01 Thread whdean
I have a Harmony 659 that I use with my SB3 - When I run into an odd command, I use the original remote and do the learning process with the original remote and, in this case, its Power button. I would rename it Power-WHD (using my initials in the name). That file is saved into the Harmony datab

Re: [slim] Harmony Remote and Power Cycling SB3

2008-01-31 Thread SteveEast
My 659 doesn't show this problem either. To my untrained eye, it looks like your 659 is sending a pause and power toggle when you switch the SB off. Since the SB was already paused, that will act like a play command. I suggest you check the Harmony setup for the appropriate activity. It sounds

Re: [slim] Harmony Remote and Power Cycling SB3

2008-01-31 Thread oriordan
Any experts able to parse this to give me some suggestions on what to do next? -- oriordan oriordan's Profile: http://forums.slimdevices.com/member.php?userid=3698 View this thread: http://forums.slimdevices.com/showthread

Re: [slim] Harmony Remote and Power Cycling SB3

2008-01-29 Thread oriordan
Here's the output: this is from turning on, pressing stop, and then turning off using "Listen to Music", Stop, and then "Off". I don't press Play at any point. It looks like the Harmony is sending some stuff that the SB doesn't recognize 2008-01-29 19:28:12.8234 IR: 768940bf -> code: power 2008-

Re: [slim] Harmony Remote and Power Cycling SB3

2008-01-29 Thread seanadams
I'd suggest turning on IR debugging in slimserver to see exactly what it's sending. -- seanadams seanadams's Profile: http://forums.slimdevices.com/member.php?userid=3 View this thread: http://forums.slimdevices.com/showth

Re: [slim] Harmony Remote and Power Cycling SB3

2008-01-29 Thread oriordan
It works fine when I use the power button on the SB remote. That was what led me to believe it's a Harmony issue. >From a symptom point of view, it's almost like the Harmony is sending a "Play - Power Off" sequence when powering off and a "Power On - Play" sequence when powering on. -- oriorda

Re: [slim] Harmony Remote and Power Cycling SB3

2008-01-29 Thread whdean
Same here - My Harmony 659 works fine in that configuration. What happens when you send the Power signal from the regular SB3 remote? - Does it act differently - That should be the determinant as to whether or not it's the Harmony causing the issue. Thanks ... -- whdean

Re: [slim] Harmony Remote and Power Cycling SB3

2008-01-29 Thread Rick B .
Interesting, as I use a Harmony 659 as well and don't have this problem. Are you sure it's a Harmony issue and not a Slimserver issue? -- Rick B. Rick B.'s Profile: http://forums.slimdevices.com/member.php?userid=8973 View

[slim] Harmony Remote and Power Cycling SB3

2008-01-28 Thread oriordan
I have a Harmony 659 which works fine controlling my SB with one exception. My SB is configured to "Pause on power off/Remain Paused at Power On". However when I use the Harmony to turn the system off, I can see that it is sending some command to restart playing right before powering down. When I