Just a quick note of appreciation - I have just used the plugin/wiki to
set up direct control of my Camrbdige Audio 640 amp via my SB3's
remote, using one very inexpesive 3.5mm to 3.5mm cable.
Slick!
Thanks!
--
bossanova808
-
Hi Browny
The level cannot be changed in software. If you want to change it
you'll need some additional hardware, I guess.
Felix
--
fcm4711
Everyone said: This cannot be done. But one day someone came along who
didn't know about this - and did it. (Source unknown)
---
I know this is an old thread, but I have just tried the 'direct
connection' tip using SB3/IRBlaster with my Onkyo TX-SR605 receiver's
'RI' Connection.
Unfortunately nothing happens :(
I've confirmed the SB3 and plugin are working OK using an emitter.
Having searched around I found the following
I found it! I found it! You are a nice guy, thank you very much, I
appreciate it.
fcm4711;193397 Wrote:
> Theta
>
> IR Blaster settings are under player settings, not under server
> settings.
>
> Happy Easter
> Felix
--
theta
Theta
IR Blaster settings are under player settings, not under server
settings.
Happy Easter
Felix
--
fcm4711
Everyone said: This cannot be done. But one day someone came along who
didn't know about this - and did it. (Source unknown)
-
I used WinLirc software to learn my YAMAHA YSP-800, I rename it to
ysp800.conf and then put it under /mnt/slimserver/Plugin/IRBlaster/ , I
re-start slimserver, I only saw IR-Blaster checkbox is checked in the
http://ip:9000\home\server settings\plugins\, I still cannot see IR
Blaster web page http