dean Wrote:
If you switch from wired to ethernet in setup the player actually
reboots (quickly) and the card is enabled/disabled as necessary.
It's installed and it works beautifully! Thanks for all the help.
Now I can ssh into the PC in my car parked in the driveway, bridged
through
Hi!
http://forums.slimdevices.com/showthread.php?t=17078
/ Baz
--
baz
baz's Profile: http://forums.slimdevices.com/member.php?userid=2194
View this thread: http://forums.slimdevices.com/showthread.php?t=18666
Yes, the settings are preserved but you have to press right on the
remote for all old settings.
What I am missing is a Keep old settings alternative so that you
don't have to spend time (OK, it takes only 20-30 sec) accepting your
old settings for IP-address, DNS etc.
Regards,
Baz
--
baz
Quoting baz [EMAIL PROTECTED]:
Yes, the settings are preserved but you have to press right on the
remote for all old settings.
What I am missing is a Keep old settings alternative so that you
don't have to spend time (OK, it takes only 20-30 sec) accepting your
old settings for IP-address,
dean Wrote:
Yes, if you select to use the ethernet port during setup the wireless
card is disabled and should not transmit.
And if you reenable it, your settings are preserved.
Great - thanks! If I enable it, do some transfers (via bridging), and
then disable it (without a full power
On Nov 30, 2005, at 12:31 PM, LavaJoe wrote:
dean Wrote:
Yes, if you select to use the ethernet port during setup the wireless
card is disabled and should not transmit.
And if you reenable it, your settings are preserved.
Great - thanks! If I enable it, do some transfers (via bridging),