My not-so-very old router died so I got a new one, which was set up
after some glitches related to the updated firmware. But working fine
now.
Except I can't seem to get the PiCorePlayer to be recognized. Have
rebooted the Pi, and then tried to connect from my computer through the
relevant IP ad
Further to the above, LMS IS running and I am able to connect to it
through the PcP interface at the relevant IP address (which was changed
slightly). This is through an ethernet connection.
Wifi is working fine, my mobile is connected to it. But it seems that
Squeeze Control is not able to conn
RonM wrote:
> My not-so-very old router died so I got a new one, which was set up
> after some glitches related to the updated firmware. But working fine
> now.
>
> Except I can't seem to get the PiCorePlayer to be recognized. Have
> rebooted the Pi, and then tried to connect from my computer t
Are you using wifi?
It will only connect if the wifi SSID and password are the same
As it is a new router the IP will be different.
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this t
Greg Erskine wrote:
> Are you using wifi?
>
> It will only connect if the wifi SSID and password are the same
>
> As it is a new router the IP will be different.
I'm using wifi only for the controller (Squeeze Control). The router is
connected to the PcP via ethernet, as is my main computer.
RonM wrote:
> I'm using wifi only for the controller (Squeeze Control). The router is
> connected to the PcP via ethernet, as is my main computer. As above.
>
> The phone is set up with the appropriate credentials and sees the router
> through wife just fine.
>
> R.
Wish I could see through m
I had wife in there twice, but only saw and corrected one, at first. I
laughed. I'd like to think it wasn't my subconscious peaking through.
Squeeze Control seems to see the server, see below.
37494
Since that is the actual name I've given it, all should be well. There
doesn't seem to be any w
Jeez, now Squeeze Control has stopped working altogether. "Squeeze
Control keeps stopping". I suppose uninstall/reinstall might be the way
to go, but perhaps it's time to go to Material Skin.
It's been an annoying technological couple days.
R.
LMS on a dedicated server (FitPC3)
Transporter
RonM wrote:
> Jeez, now Squeeze Control has stopped working altogether. "Squeeze
> Control keeps stopping". I suppose uninstall/reinstall might be the way
> to go, but perhaps it's time to go to Material Skin.
>
> It's been an annoying technological couple days.
>
> R.
Oddly enough, after me
Hello!
You can use raspberrypi4.local instead of IP
just check in Tweaks "Broadcast .local" - should be enabled
P.S. I kont like the forum - its not very conveniant - image
verification every time or only for begginers? :/ I jaust wanted to help
:(
---
Wojtulek wrote:
> Hello!
>
> You can use raspberrypi4.local instead of IP
>
> just check in Tweaks "Broadcast .local" - should be enabled
>
> P.S. I kont like the forum - its not very conveniant - image
> verification every time or only for begginers? :/ I jaust wanted to help
> :(I think aft
kidstypike wrote:
> Oddly enough, after messing about with the servers screen, my Squeeze
> Ctrl crashes immediately after starting it, rebooting the phone didn't
> help.
>
> Never mind, I don't use it anymore, I prefer Material skin.
I read this and tried mine, it still works. I have two loca
12 matches
Mail list logo