Hi
Running SBR (firmware 48), SBC (7.2 r3191), SC (7.2.1 r?)
Would like the lowest volumen to be lower, the jump
from "0=mute" to "1=lowest volumen setting" is to big for
my taste.
I do not know the dB span of the volumen control now.
Would like an increse the volumen span to some more dB.
Th
Hi
I have exactly the same experiense - hence problem with my SB3 Classic.
I bought a second hand Mission Cyrus XPA to drive my speakers with the
feed from the SB's anlogue output. This move was to keep it simple and
get rid of my NAD surround receiver with a number of analoque "ports" I
basically
See this thread: http://forums.slimdevices.com/showthread.php?t=55863
Volume is set by Squeezecenter, and you can change the range by editing
Slim/Player/Squeezebox2.pm (if you're running the .PL version as on
Mac/Linux, rather than the Windows .EXE). The current range is ~50 dB,
and it looks lik
Hi,
Just to let you know if you start using very low volume levels on the
analogue out of SB then it won't be very hifi. The volume is reduced
by shifting bits in the digital domain. Whilst the SB3 has a 24 bit
DAC - it should be OK til you get to 16 bits left, volumes lower than
that will be t
Most elegant solution is to use analog attenuators before the amp.
Then you can use most of the volume range in the SB and get lower noise
floor to.
A resonable level of attentuation is so that full volume on the SB is
as loud as you reasonable want to go (just a tad under clipping the
power amp
Make sure you're using SC 7.3 - it has a different volume characteristic
from SC 7.2.1 - with finer steps at the lower end for the analogue
output from SB2/3.
--
mooblie
Martin at 'HeadSpin' (http://www.headspin.plus.com)
mooblie;368836 Wrote:
> Make sure you're using SC 7.3 - it has a different volume characteristic
> from SC 7.2.1 - with finer steps at the lower end for the analogue
> output from SB2/3.
Hi
Thanks for answers, I use Duet 7.2.1 on Windows.
I will wait for SC 7.3.x (when it is released) before "
Hmm - this is above my knowldge i'm afraid. For instance I don't
understand how the SC - i.e. 7.3 - can influence the characteristics of
the physical interfaces on the feeder (my SB3) and the power amp?!
As said I'm using the SB3 together with a Mission Cyrus XPA power amp
with the following data
I guess I was just en lighted by reading the info-text for the various
settings in SC.
I run SC 7.2 - 2244 and in "Settings/Player/Sound/Sound level for
pre-amp" (or something like that, my text is in Danish - not sure
exactly how it is translated) you can actually specify an attenuation
level i d