n, though.
>
> --Justin
>
>
>> On Oct 5, 2016, at 2:56 PM, AMER wrote:
>>
>> Dear All
>>
>> I am having two controllers (c1,c2) and multiple switches are connected to
>> both of them. C1 controller needs to be notified when a particular packet
n, though.
>
> --Justin
>
>
>> On Oct 5, 2016, at 2:56 PM, AMER wrote:
>>
>> Dear All
>>
>> I am having two controllers (c1,c2) and multiple switches are connected to
>> both of them. C1 controller needs to be notified when a particular packet
. The switches are connected to both
of the controller, however, i want to use something other than "of.controller"
in the flow-rules that matched those two particular packets, something like "
outport=c1 or c2".
Best regards,
Amer
___
-path". Also,
I read some Docs in the net about disabling kernel path, however, I am little
bit confuse do I need to re-install openvswitch to disable the kernel path. Or
does the kernel path asks for a particular installation steps.
Best regards,
Amer
Sent from my iPhone
Sent from
Dear all
I would like to ask you about how many mpls labels can be pushed per flow in
latest OvS switch version
Best regards,
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
___
discuss mailing list
incoming
flows directly by the fast-path. Or can I disable the user-space mode to force
the OVS to do so?
May you please help me to do so?
Best regards,
Amer
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
Done like a charm
I have separated the actions into two tables
Thanks
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
From: amer7...@hotmail.com
To: discuss@openvswitch.org
Date: Wed, 3 Jun 2015 20:12:30 +
Subject: [ovs-discuss] switch as a sniffer
Hello
Dear all
I have the
with this procedure.
Any help will be appreciated
Best regards,
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
Dear Amal
I apologize, I was in vacation, may you please tell me what was your problem to
have a good documented record and how you fixed it.
Best regards,
Amer
> On Apr 9, 2015, at 2:25 PM, Amal KAMMOUN wrote:
>
> So my configuration was right but the problem was that my OVS-VM
Hello,
I did it and was working fine. Note:
The br0 IP is temporary and will be deleted when you reboot. Also, the IP will
return back to the eth0. I recommend write it in the interfaces configuration
file.
Best regards,
Amer
> On Apr 1, 2015, at 1:52 PM, Amal KAMMOUN wrote:
>
> H
need to search in this archive, I remember someone before few
weeks discussed this issue and you will find my name there.
After this setup connecting each OVS to different controller will be easier.
Best regards,
Amer
> On Mar 31, 2015, at 5:05 PM, Amal KAMMOUN wrote:
>
> Hello all!
&g
Thank you
Done.
Sent from my iPhone
> On Mar 30, 2015, at 6:42 AM, Nicholas Bastin wrote:
>
>> On Sun, Mar 29, 2015 at 8:26 AM, Amer wrote:
>> How to measure the execution time of flow-rules in openvswitch.
>> I want to compare between to settings: Openvswitc
Dear all
How to measure the execution time of flow-rules in openvswitch.
I want to compare between to settings: Openvswitch has 100 flow-rules and
another openvswitch has 500 flow-rules.
Best regards,
Amer
___
discuss mailing list
discuss
-br0 eth2
iface eth0 inet manual
ovs_bridge br0
ovs_type OVSPort
allow-br0 eth3
iface eth1 inet manual
ovs_bridge br0
ovs_type OVSPort
> And the br0 IP as a gateway to the hosts.
Best regards,
Amer
من جهاز الـ iPhone الخاص بي
في ٢٦ جما١، ١٤٣٦ هـ، الساعة ٥:٣٥ م،
ove rules to the bridge h1 can not ping br0(192.168.56.4)
I do not know how to solve this issue?
I do not add the bridges to /etc/network/interfaces, I do not know what is the
appropriate config i did not enable ip forwarding, should i enable it in hosts
and bridges
best regards,
amer
The br0 interface is labeled with LOCAL in bridge show table,
How can I use it in the flow-rules.
When wrote LOCAL I got an error saying LOCAL is not numerical value.
Best regards,
Amer
من جهاز الـ iPhone الخاص بي
في ٢٣ جما١، ١٤٣٦ هـ، الساعة ٨:٠٩ م، كتب Amer :
> nano /etc/netw
2015 at 07:11:42PM +0300, Amer wrote:
>> Do you want me to give one of the Ethernet interfaces an IP address= the
>> bridge IP, without assigning this interface to the bridge.
>>
>> Best regards,
>> Amer
>>
>> م، كتب Ben Pfaff :
>> Well, like
Do you want me to give one of the Ethernet interfaces an IP address= the bridge
IP, without assigning this interface to the bridge.
Best regards,
Amer
م، كتب Ben Pfaff :
Well, like you said, without flows, ping works. So pass through the
> ICMP traffic to the gateway to the IP st
Thank you Ben
The problem is the host need to have a gateway, however, if he can't ping the
gateway, nothing will be forwarded.
However, how can I pass the ICMP packets to the IP stack?
Best regards,
Amer
:
>> On Sat, Mar 14, 2015 at 02:29:07PM +0300, Amer wrote:
>> I have
Hello,
I have 4 VMs, 2 bridges and each one has a host.
My question is:
I need to configure a default gateway for the hosts, however when I added flow
rules to the bridges, suddenly, I can't ping them from the hosts. I know this
is due to the rules.
When the host can't ping the bridge, how I co
Eth0 in VM1 has IP 192.168.1.2
the br0 has IP 192.168.1.1
No one of VM2 interfaces are having an IP except br0.
However, when I tried to ping from VM1 to OVS(VM2) I got no replies.
What the mistake I did on this simple configuration.
Best regards,
Amer
one of its interfaces are having an IP.
However, when I tried to ping from VM1 to OVS(VM2) I got no replies.
What the mistake I did on this simple configuration.
Best regards,
Amer
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org
Thank you
I have fixed it
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
From: amer7...@hotmail.com
To: discuss@openvswitch.org
Date: Wed, 11 Mar 2015 18:35:28 +
Subject: Re: [ovs-discuss] Linear topology in openveswitch
Unfortunately, it doesn't work
I got this error, w
Unfortunately, it doesn't work
I got this error, when I add/modify this command "resubmit\(,2\)"
ovs-ofctl add-flows command takes at most 2 argument
Also, I got the fllowing error when I put the quotation marks ""
ovs-ofctl must specify an action
Best regards,
255.255.0
Best regards,
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
> Date: Tue, 10 Mar 2015 07:19:28 -0700
> Subject: Re: [ovs-discuss] Linear topology in openveswitch
> From: shet...@nicira.com
> To: amer7...@hotmail.com
> CC: discuss@openvswitch.org
>
> On Tue,
found all of my messages broadcasted
at the same time.
I apologize again
Thank you
Sent from my iPhone
> On ٠٩/٠٣/٢٠١٥, at ٧:١٠ م, Ben Pfaff wrote:
>
>> On Sun, Mar 08, 2015 at 11:55:11PM +0300, Amer wrote:
>> I would like to build and configure a linear topology using
out path ports,
is this correct?
Best regards,
Amer
> On ٠٩/٠٣/٢٠١٥, at ٥:٤٧ م, Gurucharan Shetty wrote:
>
>> On Mon, Mar 9, 2015 at 4:06 AM, AMER wrote:
>> Hello,
>>
>> I apologize for mule emails
>>
>> This is what i did and I do not know w
this in each VM
Is this correct? Did I need to add something other than the flow-rules?
Best regards,
Amer
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
> From: a.alghadh...@gmail.com
> Date: Sun, 8 Mar 2015 20:17:02 +0300
> To: discuss@openvswitch.org
> Subject: [ovs-dis
-vsctl add-port br0 eth0
ovs-vsctl add-br br1
ovs-vsctl add-port br1 eth1
Ifconfig eth0 0
Ifconfig br0 192.168.x.z
Ifconfig eth1 0
Ifconfig br0 192.168.x.y
I am going to do this in each VM
Is this correct? Did I need to add something other than the flow-rules?
Best regards,
Amer
Sent from my
Hello,
Dear folks
I read most of the examples on the internet, however, I faced some errors
I want to build and configure a linear topology using openveswitch installed in
4 VirtualBoxs and 2 hosts.
Like the following:
H1VM1VM2VM3VM4H2
Best regards,
Amer
virtual machines inside my virtual
machine or using ovs-sandbox.
I would like to get some basic things.
Thank you
Best regards,
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
___
discuss mailing list
meout = hard_timeout
msg.priority = priority
msg.actions.append(nx.nx_action_dec_ttl())
msg.actions.append(of.ofp_action_output(port = port))
msg.buffer_id = buf
self.connection.send(msg)
Best regards,
Amer
___
discuss mailing list
di
Hello,
Dear all
May please tell me what is the command to do MAC address encapsulation like
MAC-in-MAC.
Best regards,
Sent from my iPhone
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
Hello,
Dear all
May please tell me what is the command to do MAC address encapsulation like
MAC-in-MAC.
Best regards,
Amer
Sent from my iPhone
> On ١٦/١٢/٢٠١٤, at ٧:٤٤ م, Justin Pettit wrote:
>
>
>> On Dec 16, 2014, at 7:04 AM, amer AlGhadhban wrote:
>>
>
.
Best regards,
Amer
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
Hi,
Thank you for the comment, may please tell me how to check that or mitigate
this issue
Best regards,
Amer
Sent from my iPhone
On ٢٩/١٠/٢٠١٣, at ٦:٤٣ م, Ben Pfaff wrote:
> On Tue, Oct 29, 2013 at 03:20:25PM +0000, AMER wrote:
>> I am working in mininet v 2.0 and OVS v 1.10 and
this error
Best regards,
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
37 matches
Mail list logo