Ok, I found that the bug was introduced into std_4rx_0tx.rbf at version
4848. Version 4287 does not have the problem.
Hans
- Original Message -
From: "Johnathan Corgan" <[EMAIL PROTECTED]>
To: "Eric Blossom" <[EMAIL PROTECTED]>
Cc: "Hans Glitsch" <[EMAIL PROTECTED]>;
Sent: Wednesd
HA! REFCLK_REG = 43 for RXB, and 41 for RXA. I had hard-coded 41. Thank you!
I had looked at db_base.py a long time ago when I got one board working, but I
completely forgot about it until your e-mail. Thanks a lot. Now the data
looks good. :D I'll tell our accountant to send you a cons
On Wed, Oct 24, 2007 at 12:16:53PM -0700, Eric Blossom wrote:
> On Wed, Oct 24, 2007 at 02:29:31PM -0400, Jared Jensen wrote:
>
> > I'm brainstorming and I wonder if I setup RXB correctly, but haven't
> > sent some command to gate the data through. Or if there is an
> > additional step when using
On Wed, Oct 24, 2007 at 02:29:31PM -0400, Jared Jensen wrote:
>
> Wow. I'm still not able to get data out of my 2nd DBSRX. I have
> verified the board is good. I modified multi-antenna/multi-fft.py
> to use 2 DBSRX board and the 2rx 2tx fpga build. It works, and I
> can point the boards at di
Eric, thanks for your attention.
If anyone fixes this bug, or has a work-around, please let me know.
Thanks,
Hans
- Original Message -
From: "Eric Blossom" <[EMAIL PROTECTED]>
To: "Hans Glitsch" <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, October 24, 2007 10:50 AM
Subject: Re: [Discuss-
Wow. I'm still not able to get data out of my 2nd DBSRX. I have verified the
board is good. I modified multi-antenna/multi-fft.py to use 2 DBSRX board and
the 2rx 2tx fpga build. It works, and I can point the boards at different
frequencies and see good data. So I know the hardware is work
Eric Blossom wrote:
> I can reproduce it. There's definitely something off with std_4rx_0tx.rbf.
> I've opened ticket:195 http://gnuradio.org/trac/ticket/195
>
> [This is all I'm going to do about this right now.]
Since that RBF has only been re-synthesized a couple of times in the
last year o
On Wed, Oct 24, 2007 at 08:57:11AM -0700, Hans Glitsch wrote:
> Hi,
>
> Without the filter it still has the same behavior. Also, I'm going to try
> this on my faster computer that doesn't have usrp overruns. Right now it
> only has Ubuntu server, so I'm downloading the installer for Ubuntu Des
Hi,
Without the filter it still has the same behavior. Also, I'm going to try
this on my faster computer that doesn't have usrp overruns. Right now it
only has Ubuntu server, so I'm downloading the installer for Ubuntu Desktop
so I can run the spectrum display.
I wonder if anyone on the li
I think the answer you want is:
cvs -d [EMAIL PROTECTED]:/cvs/adroitgrdevel co adroitgrdevel
then ./bootstrap && ./configure as you wish from the gr-bbn subdirectory.
Thanks. Snarfed into:
http://gnuradio.org/trac/wiki/OtherCode
___
Discuss
stevie.glass schrieb:
Hi,
Having a few problems getting GNURadio working on my home PC with the
USRP. Can someone provide some tips to help me get it working again? The
problem usrper has problems finding the USRP; it reports "usrper: failed
to find usrp[0]".
Have you checked the permission
11 matches
Mail list logo