> IMBE is proprietary and the holder of the rights, DVSI, is very very
> very unwilling to share. You can try to license it from them, but
> experience has shown that they are not interested.
According to:
http://wiki.multimedia.cx/index.php?title=IMBE
the IMBE codec is patented, and here's t
Hi:
I have a problem about USRP daughterboard RFX2400.
I use "tunnel.py" to test if some nodes can communicate with each other in
2.4GHz by pinging function. Say there are three nodes: N1, N2 and N3. N1 & N2
can ping with each other and N2 & N3 can receive the ping packets too. However,
N1 &
On Wed, Sep 24, 2008 at 5:51 PM, Sebastiaan Heunis <[EMAIL PROTECTED]> wrote:
> Brian
>
> Sorry to bother. I have one more question for now. I wrote a Python
> app to generate an input signal, convert it to 12-bit two's complement
> and then bitshift it left by 3 and sign-extend it to get it to t
Brian
Sorry to bother. I have one more question for now. I wrote a Python
app to generate an input signal, convert it to 12-bit two's complement
and then bitshift it left by 3 and sign-extend it to get it to the
representation used inside the FPGA. My question now is that if I
feed this input s
Hi there,
I'm running into clock feedthrough interference at the 5th harmonic of the USRP
oscillator (1088MHz) leaking into the DBSRX board. I found Matt's advice to
Eric Cottrell to change DBSRX C261 and C262 to 4700pF to filter the clock more
aggressively, and while this helped a little, I st
Hi,
I found the am_demod.py and fm_demod.py in the blks2impl folder, but I
could not find the source code for AM modulation and FM modulation?
Can anyone give me a hint for finding both of modulations (AM
modulation and FM modulation)?
Thanks very much for your help.
Jiangfan
> What gain do you have set for the receive side?
Good point - I forgot to mention that I set the gain to 0 via the
--gain=0 switch passed to usrp_fft.py. So I shouldn't be seeing any
clipping.
Also, another detail that I forgot to mention - I didn't consider the
"carrier" at the center frequen
On Wed, Sep 24, 2008 at 7:53 AM, Kell, Scott <[EMAIL PROTECTED]> wrote:
> I put a 9dBm tone in at 50 kHz
What gain do you have set for the receive side? For the BasicRX or
LFRX, this is really the gain of the input driver to the ADC, which
can vary from 0 to 20 db, and effectively changes the fu
George P Nychis wrote:
I was thinking that the SVN structure should be something like:
/
/project_name
/project_name/trunk
/project_name/tags
/project_name/branches
What does everyone think about user directories?
/
/projects
/projects/project_name
/projects/project_name/trunk
/projects/pr
Changeset 9607+9610 broke python bindins, as the enums moved out of SWIGs
scope.
The following patch fixes this:
=== modified file 'gnuradio-core/src/lib/runtime/gr_realtime.i'
--- gnuradio-core/src/lib/runtime/gr_realtime.i 2006-08-03 03:51:51 +
+++ gnuradio-core/src/lib/runtime/gr_realtime
> I then saw the post on the USRP filter response by Firas [1] where he
> showed that for an overall decimation rate of 64 the CIC filter
response
> had better than a 55 dB anti-alias rejection. [2] But I'm seeing only
42
> dB (overall response).
>
> Does anyone have any ideas that explain this 1
IMBE is proprietary and the holder of the rights, DVSI, is very very
very unwilling to share. You can try to license it from them, but
experience has shown that they are not interested.
Kelly
On Wed, Sep 24, 2008 at 5:52 AM, teka yemane <[EMAIL PROTECTED]> wrote:
> Hi guys,
> Does any body has t
Hi guys,
Does any body has the source code and/or the algorithm for IMBE vocoder to
decode P25 signals?
I am doing a project on P25 software radio receiver and I need the IMBE vocoder
source code.
Thanks,
Teka Yemane
___
Discuss-gnuradio mailing
The gr-rds-new processing block, as it is here:
http://digilander.libero.it/iz2eeq/#rds
does not compile under Ubuntu 8.04.
The error is:
/usr/local/bin/swig -c++ -python -I/usr/include/python2.5
-I/usr/local/gnuradio/include/gnuradio/swig
-I/usr/local/gnuradio/include/gnuradio -module rds -o rds.
14 matches
Mail list logo