Greetings,
Could I set up an ordinary paralel output shift register using vector_sink or
probe_signal?
When I examined both vector_sink probe_signal, process was ended when the
output was displayed.
But, I need an ongoing data acquisition, though I can get different outputs
from both of the
Hi Dan,
Apologies for the delayed reply - life got in the road of my USRP stuff..
thanks heaps, these are exactly the answers I needed!!
Cheers
-Michael
On Thu, Jul 26, 2012 at 1:33 AM, Daniel Labarowski
labarowsk...@gmail.comwrote:
Michael,
1) For 8 bit you change the wire format
tb.start()
while not_finished:
time.sleep(10)
my_data = tb.my_probe_signal.level()
print(my_data)
tb.stop()
You can use gr.probe_signal_vc to grab a vector of data, however
you'll only grab data every 10 seconds in the above example.
This method will only give you occasional snapshots
Hi Felix,
Do you have something in a ready-to-test state concerning the DRM
transmitter?
I got a new DRM receiver (DR111) which shows the MER and SNR of the
reception.
Best regards,
Rafael Diniz
Hi Josh,
That hint with the visibility option solved all my problems. I commented
it out in the
it's
probably not stuck, it's just that after that point, it goes off and
uses apt-get to load all of the pre-requisites, which can take a *long*
time, and is done silently, unless you use the --verbose option.
Thanks! That was the case.
--
Regards,
Smith
Hey All,
How can one go about finding the SNR for a GMSK system ( at the
GMSK demodulator )?
Thanks,
Anay.
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Hi,
I was looking at the gri_control_loop.cc file and notices the
set_frequency() function seemed a little odd. Here's what it looked like.
void
gri_control_loop::set_frequency(float freq)
{
if(freq d_max_freq)
d_freq = d_min_freq;
else if(freq d_min_freq)
d_freq = d_max_freq;
If I am not wrong, I can use gr.buffer with gr.buffer_reader to design an
exact parallel output shift register,
at least the closest one.
Abdullah
From: Ben Reynwar b...@reynwar.net
To: abdullah unutmaz abdullahunut...@yahoo.com
Cc: discuss-gnuradio
