Hello!
I am selling SDR devices, used:
1 x Ettus Research USRP N210
Datasheet:
https://www.ettus.com/content/files/07495_Ettus_N200-210_DS_Flyer_HR_1.pdf
+ 1 x Ethernet cable
+ 1 x Power supply
1 x Ettus Research SBX board rev.5
SBX 400-4400 MHz Rx/Tx (40 MHz) USRP Daughterboard (400 MHz - 4.4
The GNU Radio 3.7.3 Release is in MacPorts, and contains a massive overhaul of
the OSX native audio interface that fixes all known bugs / issues with it as
well as adds device selection by name and other cool features. To update,
you'll want to do the following, minimally:
{{{
sudo port sync
s
On Mar 16, 2014, at 12:00 PM, Attila Kinali wrote:
> I'd be interested in the results of your analysis.
> Heck, i'd be even interested in the raw data :-)
>
> And yes, the insanly stupid PSK modulation scheme of WWVB is a pain for
> everyone. :-(
I switched this reply to the thread I posted la
GNU Radio releases 3.7.3 and 3.7.2.2 are available for download:
http://gnuradio.org/releases/gnuradio/gnuradio-3.7.3.tar.gz
http://gnuradio.org/releases/gnuradio/gnuradio-3.7.2.2.tar.gz
MD5 sums:
a51e1c2860d6b289233e453d4085514f gnuradio-3.7.3.tar.gz
2b2c11c8df0bec0879033ca74b6264a3 gnuradio-
Hi everybody,
I'm trying to install the gr-dvb project from Edmund Tse
(https://github.com/EdmundTse/gr-dvb) on gnruradio 3.5.3.2.
When I launch the ./configure command during the install process, I
get this kind of errors :
LF_COMMAND_CC : command not found
LF_COMMAND_CXX : command not found
LF
On 03/16/2014 05:06 PM, Chris Stankevitz wrote:
Marcus,
Thank you. In gentoo speak, what you said typically translates to
"The gnuradio ebuild has a uhd USE flag. Make sure the uhd USE flag
is enabled." Well, I checked and sure enough it was disabled. I'm
rebuilding now but I'm sure it will
On Sun, Mar 16, 2014 at 12:31 PM, Marcus D. Leech wrote:
> If you're building from source, the source-build needs to know where UHD is
> installed on your system before it can build gr-uhd, since gr-uhd
> links again UHD libraries.
Marcus,
Thank you. In gentoo speak, what you said typically t
On Sun, Mar 16, 2014 at 12:48 PM, Sylvain Munaut <246...@gmail.com> wrote:
> Since you're using gentoo, I think the most likely scenario is that
> the 'wx' USE flag is disabled.
Sylvain,
Thank you for your help. Turns out I the wxwidgets USE flag us set...
but the uhd USE flag was unset. Rebuil
> Q1: Why do I not have uhd_fft on my system?
Since you're using gentoo, I think the most likely scenario is that
the 'wx' USE flag is disabled.
uhd_fft is a python WXwidget application, so if you disabled this, you
will not have it.
Cheers,
Sylvain
_
On 03/16/2014 03:20 PM, Chris Stankevitz wrote:
Hello,
Using gentoo linux I installed uhd and gnuradio with the commands
"emerge uhd" and "emerge gnuradio". According to
http://gnuradio.org/redmine/projects/gnuradio/wiki/HowToUse:
"GNU Radio comes with a large variety of tools and programs...
Hello,
Using gentoo linux I installed uhd and gnuradio with the commands
"emerge uhd" and "emerge gnuradio". According to
http://gnuradio.org/redmine/projects/gnuradio/wiki/HowToUse:
"GNU Radio comes with a large variety of tools and programs... The
most commonly used tools include uhd_fft"
Unf
Hi all,
I am giving link for my draft for the proposal for GSoC 2014. It would be
great if you could give your feedback before i file my final application.
https://github.com/201332539IIITH/GSoC-14/blob/master/Proposal%20for%20GSoc%2014.pdf
___
Discuss-g
Thanks for the tips.
Setting the Max Output bufferin the throttle block did the trick.
Yes, the vector to stream block can be avoided. The default vector
length is 1 in grc.
Now testing works much smoother.
Good to know.
-- Volker
Am 16.03.2014 18:00, schrieb Marcus Müller:
-BEGIN PGP
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Volker,
yes, that is expected behaviour. Most probably ;)
For explanation: Since GNU Radio itself always passes around multiple
items at once (so your work doesn't get called), all throttle can do is
limit the average rate, unless it would consume
On Sat, 15 Mar 2014 20:57:02 -0500
Louis Brown wrote:
> Quite so. I have a GPSDO though, so it's nice to be able to lock to that.
> Last week I recorded WWVB (60 kHz) amplitude and phase for 1 week to monitor
> propagation. Interesting results to see the fades over 6 days Phase was
> futile t
Hi,
> For testing purposes I use
> vector source (byte ) -> vector to stream -> throttle -> [blocks to test]
> In the vector source "repeat" is set to "yes" and the sample rate is set to
> 1024 ( and in the throttle block , too ).
>
> I would expect that the throttle delivers 1024 samples every se
For testing purposes I use
vector source (byte ) -> vector to stream -> throttle -> [blocks to test]
In the vector source "repeat" is set to "yes" and the sample rate is set
to 1024 ( and in the throttle block , too ).
I would expect that the throttle delivers 1024 samples every second. But
I
Hi,
My proposal has been updated on github.
The proposal has been changed a lot according to the comments on Melange.
1.The flow graph has been changed. A new architecture is designed.
2.A state machine is added which explains more details on GSM decoder.
3.The deliverable list has been changed.
18 matches
Mail list logo
