Marcus,
Thanks for the advice, this seems to do exactly what I'm looking for. My
only question is that I've been under the impression that the UHD doesn't
yet support GPIO for the B210. I did recently upgrade to 3.8.5 though so
maybe things have changed?
Devin
On Wed, Aug 19, 2015 at 5:43 AM,
Jeon,
You can add an appropriate constant before the divide and compensate for
it afterward. The exact math will depend on the values coming out of the
correlators.
Jeff
On 08/19/2015 06:50 AM, Jeon wrote:
Let's think about the following auto/cross correlator:
On Wed, Aug 19, 2015 at 2:51 AM, Michael B mibo...@hotmail.com wrote:
I have created a flowgraph, based on an example of Michael Ossmann
https://github.com/mossmann/im-me/blob/master/garage/garage-decode.py,
which takes in a signal, and should output bits.
I need to use the clock recovery MM
(That should be moving averages, not correlators). Also, subtracting
instead of dividing might do what you want.
Jeff
On 08/19/2015 07:25 AM, Jeff Long wrote:
Jeon,
You can add an appropriate constant before the divide and compensate for
it afterward. The exact math will depend on the values
I wrote an out of tree block based on the tutorial and after i compile it,
the block shows up in the list in GRC, but when i drag it into the
flowgraph it erases the whole thing options block and all.
as a workaround, i've also tried editing a working OOT block that i have on
my machine, but when
Hello all,
I know this question has been asked before, several times, but I didn't
find a solution that allowed me to use my OOT blocks without running into
the error stated in the subject of this email.
I scoured through this webpage(
Thank you Jeff. Those are perfect.
Rich
On Tue, Aug 18, 2015 at 3:34 PM, Jeff Long willco...@gmail.com wrote:
Rich,
hilbert_fc.cc and filter_delay_fc both use kernel::fir_filter in a
relatively easy to understand way.
Jeff
On 08/18/2015 04:26 PM, Richard Bell wrote:
Hi all,
Would
Marcus, Nathan, All,
Thanks Marcus I have tried building GNU Radio with Boost 1.49 (that required by
MATLAB)
I've made a little progress, but it's slow going. I got the header files (not
included with the MATLAB release) by downloading Boost 1.49, and building it
and installing it to a
On Wed, Aug 19, 2015 at 10:49 AM, ben Gee grben...@gmail.com wrote:
I wrote an out of tree block based on the tutorial and after i compile it,
the block shows up in the list in GRC, but when i drag it into the
flowgraph it erases the whole thing options block and all.
as a workaround, i've
I'm having some trouble getting my code to compile. I get the following
error:
error: ‘kernel’ does not name a type
kernel::fir_filter_ccf *d_shape_filter;
To my *_impl.h file I added the following:
#include gnuradio/filter/fir_filter.h
private:
kernel::fir_filter_ccf
I tried this out and I'm having some problems. I'm on GR 3.7.8 and UHD
3.8.5, both the newest as far as I know.
What I did was make a flowgraph with a signal generator source and a UHD
sink in GRC. It works before I made any modifications. There are a few
lines in top_block.py that set the
That fixed the problem. Thank you.
Rich
On Wed, Aug 19, 2015 at 11:56 AM, Tom Rondeau t...@trondeau.com wrote:
On Wed, Aug 19, 2015 at 2:17 PM, Richard Bell richard.be...@gmail.com
wrote:
I'm having some trouble getting my code to compile. I get the following
error:
error: ‘kernel’ does
My gut is telling me this is a swig problem. I don't know that it's frowned
upon, but it's not easy to read without some kind of highlighting that we'd
get from github or a gist with files. If I'm correct we'd also need to see
swig/ACK.i (probably missing an include and/or gr swig block magic.
Thank you so much Ron! I will try with the new version then.
Best regards,
Miguel Cordero Limón
Ingeniero de Proyectos/Project Engineer
Área de Aviónica y Sistemas/Avionics and Systems Department
Parque Tecnológico y Aeronáutico de Andalucía
C/ Wilbur y Orville Wright, 17-19-21
41309 La
Let's think about the following auto/cross correlator:
http://i.imgur.com/Fy5hdVj.png
I've placed `divide` because I need to normalize the correlation result.
If we place `null source`, or `constant source with value of zero` right
before the `pad source`, the simplified form of the correlator
Hi all,
I'm having trouble when trying to run a GRC flowchart with the No GUI option.
The thing is that even with the simplest flowchart I get the following error:
can only concatenate list (not str) to list. I've tried all the different
configurations in the Options block but I get always the
It's an issue in that particular version of GNU Radio. I see the same
thing here.
The good news is that the No GUI option works correctly in the latest
release (3.7.8).
Ron
On 08/19/2015 02:55 AM, Miguel Cordero Limón wrote:
Hi all,
I'm having trouble when trying to run a GRC flowchart
I have created a flowgraph, based on an example of Michael Ossmann, which takes
in a signal, and should output bits.I need to use the clock recovery MM block,
which I do not fully understand yet. However, after reading some blogposts, I
am quite sure that I can leave most of the settings
Hi Devin,
You wanted to ramp up/down the external PA: Use the GPIO pins, and the
ATR registers [1] or timed commands issued over the message bus [2] to
change their state
Best regards,
Marcus
[1] http://files.ettus.com/manual/page_gpio_api.html#xgpio_fpanel_atr
[2]
19 matches
Mail list logo