Hi Marco,
volk_32fc_x2_multiply_32fc is a complex * complex multiplication:
32fc_x2 means it takes two float complex input vectors, and produces one
float complex output vector (the last _32fc).
Best regards,
Marcus
On 26.09.2015 21:05, marco Ribero wrote:
> Hi guys.
> I was performing some benc
Hi guys.
I was performing some benchmarks across different blocks, when I've noticed
a weird thing: the block blocks_multiply_xx doesn't perform a truth complex.
I've looked inside multiply_cc_impl.cc, the loop iterating over the input
calls the method volk_32fc_x2_multiply_32fc. It seems a normal
On 09/26/2015 06:48 AM, Stefano Banti wrote:
Hi all, I would like to experiment with simple_ra but, after
installing it successfully, I got an error starting flowgraph as you
can see below; looking at simple_ra.grc all the ports are obviously
connected, so there is something else which at the m
This is perfectly normal.
Please continue with step 3 as detailed in the README file.
Let us know if you have any further problems.
Achilleas
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnurad
I solved the problem.
The issue was an overdriven amplifier because the output gain was to high and so there are a lot of noise and phantom signals.
Gesendet: Freitag, 25. September 2015 um 23:12 Uhr
Von: "Andreas Ladanyi"
An: "Marcus Müller"
Cc: discuss-gnuradio@gnu.org
Betreff: Re: [Di
Hello Marcus, tks for your reply.
Yes I can upgrade to gnuradio-3.7.7.1 if needed; I cloned simple_ra from
github at:
https://github.com/patchvonbraun/simple_ra and
https://github.com/patchvonbraun/gr-ra_blocks
and followed installation instructions in simple_ra; I made "make
sysinstall" at
Could you update to a more recent Gnu Radio, and UHD?
Also, there's *NEVER* any reason to run these as root if things are
installed correctly.
Also, how did you install simple_ra and gr-ra_blocks? Did you get them
from github, or somewhere else?
On 09/26/2015 06:48 AM, Stefano Banti wrot
Hi all, I would like to experiment with simple_ra but, after installing
it successfully, I got an error starting flowgraph as you can see below;
looking at simple_ra.grc all the ports are obviously connected, so there
is something else which at the moment I'm unable to discover. It happens
both