Hello All,
I have been using my USRP1 mainly on an older Linux PC with GNU radio 3.3 .
Now I wanted to give it a try on W10 and a modern PC, but when I run a RX
benchmark_rate test with latest UHD 3.15 but also 3.10 the command window gets
filled up with DD messages and number of dropped sam
Hi Andy,
You'll probably want to use gr-satellites instead of direwolf.
https://github.com/daniestevez/gr-satellites
You can record a pass using GNU Radio using a File Sink.
Regards,
Nate Temple
On Sat, Feb 15, 2020 at 6:01 PM Andrew Stamp wrote:
> Hi,
>
> I’m looking for assistance with sett
Answering my own question. Problem was caused by libraries under
/usr/local/lib. I resolved it this way:
roger@homepc2:~$ sudo -i
root@homepc2:~# cd /usr/local/
root@homepc2:/usr/local# tar zcf lib.tar.gz lib/
root@homepc2:/usr/local# rm -fr lib/
root@homepc2:~# ldconfig
root@homepc2:~# logout
roge
Hi,
I’m looking for assistance with setting up a raspberry pi, with Direwolf
and gr-satellites, to receive and decode from the Phoenix cubesats being
deployed on February 17. Specifically, they will be ax.25, using GMSK. Is
it possible to use a raspberry pi to record the audio, and record the
wate
Hello, I apologize in advance If I sound not right.
To follow up on my inquiry:
Well, I get to know how to find the bandwidth, as our constellation
modulator uses some root raised cosine filter, it needs to have a roll-off
factor which in another way excess bandwidth. Bw=(1+alpha)*T =
(1+0.7)*(6250
Hello ,
Regarding the wireshark packet flow stop i think Dr Basti gave a
solution on his website . I think i got it Mr.Marcus Muller , the solution
for the last question but still working on its implementation verification
Thanks and regards ,
Ranganathan Sampathkumar
On Sat, Feb 15, 2020 at
Hello Marcus Muller ,
Thank you so much for the reply . The thing about Rime Stack is rime
stack is a network level stack . So my question is if its network level
stack is that the block thats restricting me from getting other hardware
signals on the Wireshark ?? and I want to let you know that
Hi,
slightly will have to repeat myself:
On 15.02.20 21:15, sampath ranga wrote:
> Hello Everyone,
>
> 1. I was trying for the past few weeks to make the Zigbee Trx
> communicate with the other Zigbee hardware for implementation
> verification . I am not using TelOS b mote with COntiki Firmwa
Hello Everyone,
1. I was trying for the past few weeks to make the Zigbee Trx
communicate with the other Zigbee hardware for implementation verification
. I am not using TelOS b mote with COntiki Firmware instead i am using a
Zigbee dongle as a hardware to make the communication work . My ques
Marcus
I see where I went wrong. I am using ettus because I have an Ettus B210 SDR. as
for setting up the rest I will upgrade to ubuntu 19.10. For my project I
require gr3.8. I am noticing that with several dependencies for 3.7 based
applications are no longer available. so upgrading everything
10 matches
Mail list logo
