I moved the Selector code (i.e. set_wave_select(wave_select)) into the
portion of my code which runs after the flowgraph is running. I still get
the same error.
Jim
-Original Message-
From: Vasil Velichkov
Sent: Wednesday, September 27, 2023 1:55 PM
To: Elmore Family
Cc: discuss-gnur
Jeff,
The freq block is an OOT module. I didn’t think they had a GRC file.
Jim
From: Jeff Long
Sent: Wednesday, September 27, 2023 4:13 PM
To: GNURadio Discussion List
Subject: Re: Index Error: output_index < noutputs
I replaced the Transmit_CESSB block with a Noise Source and Throttle to mak
I replaced the Transmit_CESSB block with a Noise Source and Throttle to
make a valid flowgraph. Did you mean to send freq.grc instead of freq.py?
Disabled that block in the top level flowgraph. In any case, no errors when
running the flowgraph. When I hit PTT, I see noise, and otherwise nothing
(no
Jeff,
I have attached the top level GRC (softrock_QT.grc), the Receive.grc hier block
(feeds the stream to the FT8_Receive block) and freq.py (the OOT module
containing the code that I am questioning).
The Transmit hier block is not pertinent to this discussion.
Note that this is a fully funct
Hello,
Taking a quick look at your recording, I see some kind of pulsed signal
that follows a regular pattern. The signal is on for a period of ~548
usec, then off for two periods of this duration (~548 usec per period),
and then the same repeats forever (one period on, two periods off). This
Hi Elmore,
On 27/09/2023 03.17, Elmore Family wrote:
> I am using a gnu radio flowgraph to attempt to select the appropriate
> Selector Block output as explained below. The following error occurs when I
> run the flowgraph: Index Error: output_index must be < noutputs.
> I forgot to include the
Sorry, it takes too much time to make guesses from fragments of a project.
Could you post a grc file that is runnable and shows the error?
On Wed, Sep 27, 2023 at 11:14 AM Elmore Family wrote:
> Marcus,
>
> I forgot to include the version: 3.9.4.0.
>
> Jeff
>
> Ignore the previous GRC with the P
Marcus,
I forgot to include the version: 3.9.4.0.
Jeff
Ignore the previous GRC with the Python block. I did things differently this
time as you can see in the connections. I also attached the FT8_Receive.grc
file.
Jim
-Original Message-
From: Marcus Müller
Sent: Wednesday, Septem
Hello there all, I hope someone can help me
I am trying to watch some television on CH47 (679.25Mhz)
I am in Slovenia and I am trying to receive and watch Federalna Televizija
transmitting from Bosnia and Herzegovina (BiH)
But there is very anoying signal bothering me, you can see the probl
In the previous GRC you posted, there is a "Wave Select" Python block with
no inputs or outputs. I don't think we have enough info to figure out what
you are doing. As Paul Atreides mentioned, posting a full GRC would help.
On Tue, Sep 26, 2023 at 10:36 PM Elmore Family wrote:
> Paul,
>
> Thanks
Hi Jim,
since we've worked on Selector recently, it would **really** be important to know the
version of GNU Radio you're dealing with!
Best regards,
Marcus
11 matches
Mail list logo
