Hello All,
Does anyone know where to get clocktamer-1.2 or any similar source with no GPS.
Fairwaves seems to be out of stock.
Thank you.
Respectfully,
H. E. Baidoo-Williams,
GRA, University of Iowa
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gn
scuss-gnuradio-bounces+henry-baidoo-williams=uiowa@gnu.org] On
Behalf Of Marcus D. Leech
Sent: Monday, October 08, 2012 4:36 PM
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] Help on choice of daughter board for 40-50MHz
experiments
> On Mon, Oct 8, 2012 at 11:54 AM, Baidoo-
Hello ,
We are looking for a daughterboard to run experiments within the range of
40-50MHz. We have used the basic Tx and basic Rx before but just for routing
signals to an oscilloscope probe. Has anyone got any experience with actual
transmission and receiving with the basic TX/RX boards? We
Hello all,
I have figured out that the code gets stuck at line 275 of the code attached
thus;
msg = self.rcvd_pktq.delete_head()
Can anyone tell me which module is implementing the received message queue and
any ideas on why it will be empty apart from received frequency not aligned t
I have the attached codes which were working and the uhd_cc2420_rxtest.py was
decoding packets albeit with high error rate. I upgraded to gnuradio 3.6 and
had to change a few commands like changing packet_utils to digital and
clock_clock_recovery_mm_ff to digital_clock_recovery_mm_ff.
Both codes
Hello all,
I am running this command; sudo make install on the UCLA Zigbee PHY and I get
this
wlab@ubuntu:~/gr-ieee802-15-4$ sudo make install
Making install in config
make[1]: Entering directory `/home/wlab/gr-ieee802-15-4/config'
make[2]: Entering directory `/home/wlab/gr-ieee802-15-4/config'
@gnu.org] On
Behalf Of Josh Blum
Sent: Tuesday, June 05, 2012 6:04 PM
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] /usr/local/include/gnuradio/swig/gnuradio.i:31:
Error: Unable to find 'gruel_common.i'
On 06/05/2012 11:00 AM, Baidoo-Williams, Henry E wrote:
> Thanks
Thanks a lot Josh. I changed swigincludedir to
swigincludedir =
$(grincludedir)/swig -I/usr/local/include/gruel/swig
Now I get these errors
wlab@ubuntu:~/gr-ieee802-15-4$ make
make all-recursive
make[1]: Entering directory `/home/wlab/gr-ieee802-15
Hi,
I am trying to run an old application that was working previously but when I
upgraded to 3.6.1 I get the error in the title. Has anybody encountered and
solved this problem?
H.E. Baidoo-Williams
GRA, University of Iowa
___
Discuss-gnuradio mailing
Hi all,
I updated to gnuradio 3.61 and previously working applications are not working.
I tried recompiling the UCLA packet sniffer and I get errors on the make.
It seems there was a similar case that was resolved on this link,
http://www.ruby-forum.com/topic/4040797 , however I can't get where t
Hello Josh,
I realized that the error was coming from this loop in ieee802_15_4_pkt.py
try:
self.callback =kwargs.pop('callback')
self.threshold =kwargs.pop('threshold')
self.chan_num=kwargs.pop('channel')
except KeyError:
pass
so I chan
Hi Josh,
I do not think there is a command line input for any channel line. The input
parameters are these;
mahboob@ubuntu:~/gr-ieee802-15-4/src/examples$ sudo
./uhd_cc2420_rxtest.py --help
linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.003.000-25f0bd5
Usage: uhd_cc
Hello all,
I have been trying for some time now to run your code uhd_cc2420_rxtest.py with
little success on USRP N200. I am using gnuradio 3.5 and Ubuntu 11.10. I get
the messages and error below:
mahboob@ubuntu:~/gr-ieee802-15-4/src/examples$ ./uhd_cc2420_rxtest.py
linux; GNU C++ v
13 matches
Mail list logo
