Hello,
The USRP2 has a high data rate and it needs a lot of resources, I don't
think that it is a good idea to run both USRP2's on one machine.
Ben Yahmed
Miklos Christine wrote:
Hello,
I don't encounter this problem anymore. Someone else was trying to
debug the code.
Hi,
I do not encounter this problem, the simple_mac run in a correct way for
me. Do you use the latest versions of the firmware and fpga?
Ben Yahmed
Miklos Christine wrote:
Hello Ben,
When I try to run the version of simple_mac that you posted, I get an
error.
It seems like an infinite
from 10.0.0.1: icmp_seq=69 ttl=64 time=15.5 ms
^C
--- 10.0.0.1 ping statistics ---
69 packets transmitted, 55 received, 20% packet loss, time 68792ms
rtt min/avg/max/mdev = 9.695/20.881/52.076/13.669 ms
Ben Yahmed wrote:
Hi all,
I succeeded to make the simple_mac.py working. now it's pi
Good News
I finally succeeded to receive with an USRP2 packets sent with another
USRP2. I tryed to modify the parameters and found the magic combination:
./bbn_80211b_tx.py -f 2.4G -e eth1 -i 24 -r 20
>>> gr_fir_ccf: using SSE
Network interface: eth1
USRP2 address: 00:50:c2:85:30:cb
Us
Hi,
Did you try to send and receive packets between 2 USRP2? I tryed but
without any result. Are you sure that it's working correctly? I will
have a look to the code in more details and tell you if something will
work.
Ben Yahmed
Smith L. wrote:
Hi,
This is what I get when
hacked together and difficult to understand. I'll try to send it
to the list sometime today.
On Mon, Apr 20, 2009 at 2:14 AM, Ben Yahmed
<mailto:maher.ben_yah...@sophia.inria.fr>> wrote:
Hi all,
Thank you Colby for the update. I just run the code and it seems
to work, b
211b_rx.py ?
Ben Yahmed
Colby Boyer wrote:
Hi All,
So I ran a sanity test on the TX and RX functions.
In the tx.py file, I added a file sink to record the data being sent
to the USRP2. In the rx.py file I added a file source to read that
data, rather than reading samples from the USRP2. When I di
on receiving packets between two
USRP2s? When
> RX/TX there is a usrp2::ctor reset db failed error. Could this cause
> problems for the RX/TX? I am using the firmware that was shipped
with the
> USRP2.
>
> Thanks,
> Colby Boyer
>
&
Hi all,
Since I have tested the tx code (bbn_80211b_tx_port2.py), I wanted to run the
bbn_80211b_rx.py inorder to capture the packets sent but I encountred this
error:
# ./bbn_80211b_rx.py
Traceback (most recent call last):
File "./bbn_80211b_rx.py", line 179, in
main ()
File "./bbn_8
Thank you for your help, the error disappeared
Ben Yahmed
Johnathan Corgan wrote:
The issue is with the output signature being declared in the last part
of the above line. It is trying to create a hierarchical block with a
variable number of output ports. This functionality is not yet
Hi all,
I'm very interested in the code you are discussing and as a first step I
installed gnuradio and the svn code taken from
https://www.cgran.org/browser/projects/bbn_80211/branches/usrp2_version
on a fedora core 10 and tried to test the bbn_80211b_test.py, but I
encountred this problem:
11 matches
Mail list logo
