Hi Patrick,
I bet Thomas (DL9SAU) will be there:
http://www.chaoswelle.de/Benutzer:DL9SAU
and I bet, the Deutscher Amateur Radio Club will be present there.
Thomas is head of the DARC district of Berlin. He's also a CCC
representative, afaik.
br
Markus
dl8rds
Am Donnerstag, den 07.07.2011, 10:
Dear list,
I also purchased a USRP2 for one very important reason. I am a HAM radio
operator (DL8RDS), but I see that this device will open up a completely
new field of technology.
I didn't want to run predefined experiments such as those you can do
with SoftRock or Perseus kind of tools, but I
Same with me. Was was just able to modify the original card. Duplicating
the card didn't work. I ripped it with dd and tried to copy the image to
another sd card, but without success.
A spare card in reserve would be really nice.
BR
Markus
DL8RDS
Am Sonntag, den 14.11.2010, 12:11 -0500 schrieb
u2_flash_tool.py from here:
http://www.mail-archive.com/discuss-gnuradio@gnu.org/msg20924.html
Everything works fine now!
BR && 73s
Markus
DL8RDS
Am Freitag, den 12.11.2010, 04:15 +0100 schrieb Markus Heller M.A.
(relix GmbH):
> Hi Marcus,
>
> I guess this is the reason because nothi
; With classic USRP2 firmware you'll need the firmware image that
> supports the WBX. I'd you're using UHD it should just work
>
>
>
> --
> Principal Investigator
> Shirleys Bay Radio
> Astronomy Consortium
> http://www.sbrac.org
>
>
Dear list,
I got the LFRX / LFTX boards to work, but my WBX board will not work at
all. I can neither receive the slightest bit nor transmit.
The simplest FFT experiment does not show anything.
How do I start to diagnose how it works?
BR
markus
dl8rds
___
Hi Steve,
on my webpage I collected a number of receive and transmit flowgraphs
for all sorts of modulations, but also FM:
http://www.dl8rds.de/index.php/GNURadio_and_USRP2
I also own the USRP2 and the WBX board and I am testing them step by
step.
Please also consider these documents:
http://
Dear list,
does anyone have a flowgraph that permits to receive analog TV?
BR
Markus
DL8RDS
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
t; On 11/03/2010 11:11 PM, Markus Heller M.A. (relix GmbH) wrote:
> > Hi Marcus,
> >
> > great, now I know what was wrong. I didn't expect my dummy load to be so
> > safe. It was a real signal lock :-)
> >
> > For all the others, here's a sh
kus
DL8RDS
Am Mittwoch, den 03.11.2010, 22:46 -0400 schrieb Marcus D. Leech:
> On 11/03/2010 06:57 PM, Markus Heller M.A. (relix GmbH) wrote:
> > I kindof have a similar problem. Guess I havent understood this yet.
> >
> > I want to generate a very basic signal at 10.00
I kindof have a similar problem. Guess I havent understood this yet.
I want to generate a very basic signal at 10.00 MHz. A little up or
down is not relevant, but I want to hear a signal at all. I have a very
sensitive HF receiver right next to my dummy load, so that should work
with a very f
Hi Rachel, this looks like a system overload. The source generates too
much data so that the cpu will not leave any cycles for the rest of the
application.
In the category "misc" there's a block called "throttle". Use it before
the FFT block. It will reduce the number of samples that will go into
Dear community,
I'm looking for a HOWTO that describes how to get the WBX/USRP2 up and
running in a basic application. I already got the LFRX board
operational, but I'm not sure hw to do the same with the WBX.
Thanks ahead
Markus
DL8RDS
___
Discuss-g
13 matches
Mail list logo