Hello,
Yes, as Christiophe mentioned i don't think we have a working version of gr
osmocom that is compatible with gnuradio 3.9.
If your ppa version of gnuradio that you have downloaded is 3.8.2 then you
just need to build osmocom sdr by pulling from its master branch.
You can find the gnuradio
on target with my results... A little baffling to me
> though... linking against OOTs seems like a fairly standard use case but
> maybe it's less common than I thought. It's definitely needed for rfnoc
> though.
>
>
> Mohamed Yaaseen,
>
> The change that worked for me was t
get past the make process also and install it in gr 3.8.
It would be really great...!!!
Regards,
Mohamed Yaaseen
On Tue, 30 Jun 2020 at 16:01, EJ Kreinar via USRP-users <
usrp-us...@lists.ettus.com> wrote:
> Hi gnuradio and usrp-users,
>
> I'm trying to update rfnoc OOT modules for
it useful. Cheers.!
Regards,
Mohamed Yaaseen
On Sun, 28 Jun 2020 at 02:43, Alex Roberts wrote:
> Andy,
>
> I’m not sure how integrate the correlation sync block with gmsk. It
> expects modulated symbols and I’m not sure how to generate a modulated
> vector of gmsk symbols. The
branch
The UHD-3.15 branch of uhd repository is the current stable version and
master branch corresponds to UHD-4.0.0.
Regards,
Mohamed Yaaseen
On Fri, 26 Jun 2020 at 17:51, cherif chibane
wrote:
> Hi Moahmmed,
>
> I am in the process going that RFOC tutorial in:
>
> https://www.yout
even for UHD-3.15-LTS version
Looking forward to your suggestions, tips and answers ..!!
Thanks, stay safe and healthy !!
Regards,
Mohamed Yaaseen
Hello guys,
I am trying to install, gr-clenabled. cmake works fine but I am
getting error during make
/usr/bin/ld: cannot find -lgnuradio-blocks
> /usr/bin/ld: cannot find -lgnuradio-fft
> /usr/bin/ld: cannot find -lgnuradio-filter
> collect2: error: ld returned 1 exit status
> make[2]: ***
streams of 1 Msps each but if I use
RFNoC implementation then my stream will be looking like 0 | 1 | 2 | 3
samples interleaved between channels, so what is rate of this interleaved
stream, still 4Msps ?
Regards,
Mohamed Yaaseen
On Sat, 6 Jun 2020 at 13:17, EJ Kreinar wrote:
> Hi Moha
Hello Guys,
recently I have started looking into the RFNoC platform. I have
successfully installed RFNoC and was able to build fpga images with
default pre-built modules like fft etc. I haven't; however started with the
gain module from "Getting started tutorial" .
My system setup,
It got fixed finally. I just removed the device parameter all together. And
let the block itself decide it.
And it worked like a charm..!
Thanks & regards,
Mohamed Yaaseen
On Thu, 4 Jun 2020, 5:15 pm Mohamed Yaaseen,
wrote:
> Yes, I tried including the "type=x300" in the devic
this issue ? what am I doing wrong here ? Help, suggestions highly
appreciated
thanks in advance !!
Regards,
Mohamed Yaaseen
this issue ? what am I doing wrong here ? Help, suggestions highly
appreciated
thanks in advance !!
Regards,
Mohamed Yaaseen
12 matches
Mail list logo