Hi,
I am testing the carrier sense mechanism on USRP based on code from
benchmark_tx.py and tunnel.py. My scenario is to receive packets from two
distinctive nodes simultaneously at the third node. I am prefixing the
payload with sender node name to identify the sender.
When I am trying to send
Hi,
I am facing a problem with benchmark_rx.py. On receiving side, sometimes its
reporting problem with unpack module for payload. I have used the same
program previously too and didn't have any issue with the same. I am
confused what can be causing this problem. For you information, I am using
, 2008 at 4:59 PM, Shirve [EMAIL PROTECTED] wrote:
Hi Zhenghao,
Thank you for your valuable reply. I appreciate it. As per your supplied
information, I will start looking for CSMA code in tunnel.py, though if
you
can send me your code, it will be quite helpful too. I hope that using
tunnel.py code
.
Zhenghao
On Wed, Oct 22, 2008 at 6:19 PM, Shirve [EMAIL PROTECTED] wrote:
Hi,
As per the current status of GNU Radio, I got to know that there is no
MAC
(CSMA) implementation. Therefore I am not sure if I can get the signal
from
signal processing blocks of GNU Radio about the carrier
Hi,
As per the current status of GNU Radio, I got to know that there is no MAC
(CSMA) implementation. Therefore I am not sure if I can get the signal from
signal processing blocks of GNU Radio about the carrier sensed by USRP
receiver.
Please help me in this regard.
Till now I am able to locate
Hi,
I am trying to get some audio signal (radio signals in the range of 89-107M)
from am_rcv.py, but getting following dump. Am i doing it correctly ?
Otherwise what could be the other possible reason for this? Help me to sort
out this problem.
gnuradio-3.0.4/gnuradio-examples/python/usrp$
Thank you Eric.
It worked out nicely.
With Regards
-Sachin
Eric Blossom wrote:
On Wed, Oct 31, 2007 at 03:47:45PM -0700, Shirve wrote:
Hi All,
I am a starter for software radio. I have made the setup (USRP hardware
RFX1200, Basic-Tx and Basic-Rx daugherboards from ettus and Ubuntu 7.04
Hi All,
I am a starter for software radio. I have made the setup (USRP hardware
RFX1200, Basic-Tx and Basic-Rx daugherboards from ettus and Ubuntu 7.04
with all the dependencies installed as per gnuradio-wiki build guide) with
gnuradio-3.0.4 stable release version and tested the USRP hardware
