update or sumthing on FPGA on usrp1 ???
Looking forward to hear from you.
Thanks for your help.
Cheers.
Marcus D. Leech wrote:
On 10/16/2011 05:55 PM, waqasme wrote:
Hi Marcus,
As i mentioned the flow graph signal blocks i have used in gnu radio
companion from that i am getting this out put
Hello Marcus thanks for your reply.. Well the problem is there is not much
documentation available on internet on usurp .. Also I am quite new to gnu
radio and usrp1 ... I tried to play with interpolation and decimation
settings but didnot get the desired ofdm signal .. I am not sure what else I
Hello Marcus thanks for your reply.. Well the problem is there is not much
documentation available on internet on usurp .. Also I am quite new to gnu
radio and usrp1 ... I tried to play with interpolation and decimation
settings but didnot get the desired ofdm signal .. I am not sure what else I
Hello Marcus thanks for your reply.. Well the problem is there is not much
documentation available on internet on usurp .. Also I am quite new to gnu
radio and usrp1 ... I tried to play with interpolation and decimation
settings but didnot get the desired ofdm signal .. I am not sure what else I
Hello all,
I am trying to transmitt and recieve OFDM signal Via USRP1 board. I made
basic simulation in GNU radio a signal source block and then interleave and
then OFDM modulator and then channel model block then usrp1 sink and fft
sink to see the output..In FFT sink at the end it shows proper
and i am using USRP1 board . i hope the above
too diagrams help you to understand my problem.
Thanks and Regards,
Marcus D. Leech wrote:
On 10/16/2011 12:29 PM, waqasme wrote:
Hello all,
I am trying to transmitt and recieve OFDM signal Via USRP1 board. I made
basic simulation in GNU radio
/gnuradio/examples/ofdm/
benchmark_ofdm_tx.py -h
Don't forget the spaces (just copy paste should work)
On Sun, Sep 11, 2011 at 7:19 PM, waqasme waqa...@hotmail.com wrote:
hello Johnny,
I tried that locate command and i have found the location of the files
.here
is the output:
hp@ubuntu
/gnuradio/examples/ofdm/
benchmark_ofdm_tx.py -h
Don't forget the spaces (just copy paste should work)
On Sun, Sep 11, 2011 at 7:19 PM, waqasme waqa...@hotmail.com wrote:
hello Johnny,
I tried that locate command and i have found the location of the files
.here
is the output:
hp@ubuntu
Hello sumit,
I am trying to make OFDM trasmitter and reciever block diagram( with signal
processing blocks available in GNU Radio) in GNU Radio companion. As my
supervisor asked me to make simulation first in GNU radio software then move
on to USRP. i have made this basic simulation model for
for almost 12 hrs... so whts the situation
now.are you able to transmit and receive
waqasme wrote:
Hi Sumit,
Thanks you so much for ur detailed explanation . i really appriciate your
help.
I am following the same steps as you mentioned earlier but iam getiing
this message when i
can change the bandwidth of the ofdm signal by changing the no of
occupied tones or fft length because bw = occupied tones/ fft length
let me know ur results.
Regards
waqasme wrote:
hello sumit,
yah i have replaced the GMSK modulator and demodulator with OFDM
modulator and demaodulator
locate benchmark_ofdm_tx.py
The results will show you where the file is in your system.
Good luck,
Johnny
On Sun, Sep 11, 2011 at 5:55 PM, waqasme waqa...@hotmail.com wrote:
Hi Sumit,
Thanks you so much for ur detailed explanation . i really appriciate your
help.
I am following
the parameters u can play
with.
waqasme wrote:
And sorry to mention in the last mail that i will be suing USRP 1 .
waqasme wrote:
Hi Sumit,
Thank you so much for your quick response. yah i understand what your
saying and i am trying to understand this document but it doesnot help
is in your system.
Good luck,
Johnny
On Sun, Sep 11, 2011 at 5:55 PM, waqasme waqa...@hotmail.com wrote:
Hi Sumit,
Thanks you so much for ur detailed explanation . i really appriciate your
help.
I am following the same steps as you mentioned earlier but iam getiing
this
message when i
/gnuradio/examples/ofdm/
benchmark_ofdm_tx.py -h
Don't forget the spaces (just copy paste should work)
On Sun, Sep 11, 2011 at 7:19 PM, waqasme waqa...@hotmail.com wrote:
hello Johnny,
I tried that locate command and i have found the location of the files
.here
is the output:
hp@ubuntu:~$ cd
its very easy.. :)
may i know what daughter boards do you have...
waqasme wrote:
Hello sumit,
Thanks for your help i went through that document that you refered to,
and i tried to implement that OFDM transmitter part. This document only
explain about OFDM flow graph
Hi Tom,
Thanks for your reply. yah i did use noise block and i am changing the
amplitude in the noise block but it does not make any difference in the
output. You said calculate the SNR value i have to check signal power and
determine the noise power. i dont know how to calculate those values.
And sorry to mention in the last mail that i will be suing USRP 1 .
waqasme wrote:
Hi Sumit,
Thank you so much for your quick response. yah i understand what your
saying and i am trying to understand this document but it doesnot help
much . As you mentioned use the same Tranceiver setup
Hello sumit,
Thanks for your help i went through that document that you refered to, and i
tried to implement that OFDM transmitter part. This document only explain
about OFDM flow graph or transmitter. Is there any other document or
information related to OFDM modulator and demodulator
/01/29/intro-to-gnuradio-and-the-usrp-part-2-visualizing-the-waves/
waqasme wrote:
Hello All,
Does anyone know how to implement OFDM implementation by USING GNU RADIO
COMPANION. Some one told me to use Benchmark_OFDM.py script. But i am not
sure how this will work and how we can put
Hi All,
Does anyone know where we can change the Signal to noise ratio value in GNU
radio companion. i have made one DQPSK simulation for image transfer and now
i want to check the transmission and reception of the image at different SNR
values. I am unable to find any signal block where i can
Hello everyone,
I am trying to implement DQPSK implementation in GRC and trying to transfer
image but i am getting this error message . Also some of my connection are
grey. Can anyone please tell me what does grey connection means? and how to
fix that?
i tried to remove the connection and also
Thank you so much Tom for your quick response.. yes i have found the code
scripts in gnurdio-examples/python/ofdm.
But iam not sure how to implement this code to make simulation in GNU radio.
could you please explain in bit detail how to use this code to make the
tranmission and reception blocks
looking forward to hearfrom you. Thanks for ur help...
Thanks and Regards,
Waqas.
waqa...@hotmail.com
waqasme wrote:
Thank you so much Tom for your quick response.. yes i have found the code
scripts in gnurdio-examples/python/ofdm.
But iam not sure how to implement this code to make simulation
Hi Everyone/Smith,
I am doin my M.Sc. project on OFDM Implementation in GNU RADIO (SDR) via
USRP.
I am quite new to GNU Radio i dont know much about its functions. I am
looking for benchmark_ofdm.py file that i can use to implement the design n
GNU radio and later on transmit and recieve via
in GNU Radio. I will really appriciate if
you kindly guide me how to make this simulation work. Thanks for your help
and for your valuable information. looking forward to hear from you.
Regards,
Waqas.
waqa...@hotmail.com
On Sat, Aug 13, 2011 at 11:38 AM, waqasme waqa...@hotmail.com wrote:
Hi
26 matches
Mail list logo