If you can stand the temperature, your usrp should be fine.
Matt
The only additional remark I'll make is that higher temperatures do a
couple of things in the analog section of any receiver:
o The LNA gain will be somewhat lower (perhaps as much as 0.2dB or so)
o The LNA noise tem
ow in July. Will the USRP2 be able to
operate under these high temperatures?
Check it out:
http://www.wund.com/US/AZ/Yuma.html
--- On Thu, 6/30/11, Feng Andrew Ge wrote:
> From: Feng Andrew Ge
> Subject: Re: [Discuss-gnuradio] Max temperature for usrp2
> To: emat...@nd.edu, discuss-gn
http://www.wund.com/US/AZ/Yuma.html
--- On Thu, 6/30/11, Feng Andrew Ge wrote:
> From: Feng Andrew Ge
> Subject: Re: [Discuss-gnuradio] Max temperature for usrp2
> To: emat...@nd.edu, discuss-gnuradio@gnu.org
> Date: Thursday, June 30, 2011, 4:52 PM
>
> Eric, in your 2009 exper
Eric, in your 2009 experiment indicated below, did the USRP2 sustain the high
temperature of 150 F?
Is there anybody else who has tried to use USRP2 continuously at a temperature
above 105 F? Your feedback is highly appreciated.
Andrew
On Mon, Jul 13, 2009 at 1:13 PM, Eric Matlis wrote:
Jordan J Riggs wrote:
The brute-force method to answering your question is probably to look at
the operating temperature ranges in the datasheets for the major
cmoponents. A few things come to mind: the SD card (one of the cheaper
components, I suspect), the ethernet cable, and the resistors. T
Eric Matlis wrote:
Hi all-
I'm about to conduct some measurements on a running GE aircraft jet
engine with the USRP2. The test cell temps could reach 150 F. Is
that going to fry my USRP?
We haven't done any testing at those temperatures (about 66 C), but it
is within the temperature specs
> few things come to mind: the SD card (one of the cheaper components, I
> suspect), the ethernet cable, and the resistors.
You could try using a SanDisk Extreme III SD card. They're engineered
for rough environments; their web site has photos recovered from one
that went up for days in an unteth
anks,
> eric
>
> -Original Message-
> From: Jordan J Riggs
> Sent: Monday, July 13, 2009 3:20 PM
> To: Eric Matlis
> Cc: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio] Max temperature for usrp2
>
> Why not just run some hefty cable from the test environment to
The length of cable would have to be 100 ft; my signal becomes attenuated
excessively.
Thanks,
eric
-Original Message-
From: Jordan J Riggs
Sent: Monday, July 13, 2009 3:20 PM
To: Eric Matlis
Cc: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] Max temperature for usrp2
Why
Why not just run some hefty cable from the test environment to the USRP?
Sounds fun, though!
Jordan
On Mon, Jul 13, 2009 at 1:13 PM, Eric Matlis wrote:
> Hi all-
>
> I'm about to conduct some measurements on a running GE aircraft jet engine
> with the USRP2. The test cell temps could reach 150
Hi all-
I'm about to conduct some measurements on a running GE aircraft jet engine with
the USRP2. The test cell temps could reach 150 F. Is that going to fry my
USRP?
Thanks,
eric
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://
11 matches
Mail list logo
