s tunnel.py is running perfectly.
> Thanks.
>
> --
> Date: Thu, 8 Jul 2010 13:07:04 -0400
>
> Subject: Re: [Discuss-gnuradio] Re: Help required tunnel.py
> From: ta.tu...@gmail.com
> To: chucklor...@hotmail.com; discuss-gnuradio@gnu.org
>
> I finally fo
being sensed.In digital
folders tunnel.py is running perfectly.Thanks.
Date: Thu, 8 Jul 2010 13:07:04 -0400
Subject: Re: [Discuss-gnuradio] Re: Help required tunnel.py
From: ta.tu...@gmail.com
To: chucklor...@hotmail.com; discuss-gnuradio@gnu.org
I finally found a setting that actually works. So
perfect reception was observed. 0 packets were dropped.
>
>
>
>
> --
> Date: Thu, 8 Jul 2010 11:09:30 -0400
>
> Subject: Re: [Discuss-gnuradio] Re: Help required tunnel.py
> From: ta.tu...@gmail.com
> To: chucklor...@hotmail.com; discuss-gnur
nks a lot,
Tuan
On Thu, Jul 8, 2010 at 10:55 AM, chuck lorres wrote:
> I am using RFX 2400, gnuradio 3.2.2, ubuntu 9.10 and 9.04 on another
>
>
> --
> Date: Thu, 8 Jul 2010 10:48:24 -0400
> Subject: Re: [Discuss-gnuradio] Re: Help required
Chuck,
What hardware are you using?
On Thu, Jul 8, 2010 at 10:38 AM, chuck lorres wrote:
> Hi,
> I have successfully run digital folders tunnel.py.
> However, I am not receiving anything when i run the ofdm folder tunnel.py.
> Whereas the benchmark_ofdm_tx+rx.py is running perfectly.
> I have v
Hi,
I have successfully run digital folders tunnel.py.
However, I am not receiving anything when i run the ofdm folder tunnel.py.
Whereas the benchmark_ofdm_tx+rx.py is running perfectly.
I have varied almost all the available parameters but to no avail.
Please help me out.
Thanks in advance.
Chuc
Juan,
Thanks a lot for your response. I tried stopping at the ifconfig stage and
wait for both PCs to be ready before hitting enter. But all I saw was TX and
no RX. Do you have any idea where the problem might be?
Tuan
On Wed, Jul 7, 2010 at 7:10 PM, Juan Quiroz wrote:
> I have installed deb p
I have installed deb package of GNU radio 3.2.2 for Ubuntu 9.04 and works fine,
with openSUSE 11.1 I try tarball and everything is OK, for openSUSE there's a
rpm package of GNU radio 3.1.3 avalaible in http://software.opensuse.org/search
it's ok too.
Try doing this step by step
Run tunnel.py, i
Did you manage to have an IP/TCP section working? I tried changing both the
carrier threshold and interpolation, decimation values but every time I
tried pinging the other USRP, I got the message 'Destination Host
Unreachable'.
I tried benchmark_tx/rx and always had packet drops; benchmark_ofdm_tx
I did the same question a few weeks ago! You should change carrier threshold to
a higher value, default is 30 db, I changed to 50 db to get a clear connection,
I'm working with openSUSE 11.1 and I'm root user transmitting in first wifi
channel, so I write in console:
user# python tunnel.py -f 24
10 matches
Mail list logo
