Hi Cinaed,
Thanks for your help.
I am away at the moment and can't try your solution.
I'll be back this weekend and let you know if the method is successful.
Sincerely,
Mansour.
> On 22 Jun 2017, at 20:28, Cinaed Simson wrote:
>
>> On 06/22/2017 05:24 AM, Derek Kozel
On 06/22/2017 05:24 AM, Derek Kozel wrote:
> Hello Cinaed,
>
> I have no experience with the TUN/TAP code or setup, but the B210 is an
> SDR which can only be connected to the host using USB.
Did you try it?
>There is no IP
> address associated with it.
Probably because you haven't given it
Hello Cinaed,
I have no experience with the TUN/TAP code or setup, but the B210 is an SDR
which can only be connected to the host using USB. There is no IP address
associated with it.
https://www.ettus.com/product/details/UB210-KIT
Regards,
Derek
On Thu, Jun 22, 2017 at 10:29 AM, Cinaed Simson
On 06/17/2017 04:26 AM, mansourabadi.mojt...@gmail.com wrote:
> Hi Cinaed,
>
> Sorry to miss the previous email.
>
> I need to clarify that B210 USRP is connected to the PC though USB cable.
> That's why my Ethernet cards are disabled.
>
> Meanwhile I have been trying different things and I
Hi Cinaed,
Sorry to miss the previous email.
I need to clarify that B210 USRP is connected to the PC though USB cable.
That's why my Ethernet cards are disabled.
Meanwhile I have been trying different things and I noticed the followings:
1- Packet Encoder/Decoder blocks work fine with GMSK
Incidentally, all you need is a $20-$30 Ethernet switch with 5-8 ports,
and 3 CAT-6 Ethernet cables - twice as long as you think might need.
Then plug 1 one cable into each of the 3 device and plug the other end
the of all the cables into the switch.
Configure them as below and you should be
On 06/15/2017 08:15 AM, Mojtaba Mansour Abadi wrote:
> Hi,
>
> These are the output of the commands:
>
> PC1:
>
> enp0s31f6 Link encap:Ethernet HWaddr f4:8e:38:b3:42:db
> UP BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>
Hi,
These are the output of the commands:
PC1:
enp0s31f6 Link encap:Ethernet HWaddr f4:8e:38:b3:42:db
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
: Cinaed Simson
Sent: 14 June 2017 00:39
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] TUN/TAP PDU not working
On 06/13/2017 12:41 PM, Mojtaba Mansour Abadi wrote:
> Hi Everyone,
>
>
>
> I am trying to connect two PCs using B210 USRPs and tunnelling method.
&g
I don't know exactly what you mean by bringing up interfaces.
Let's say I assign 192.168.200.1 to PC1.
For sure I can ping 192.168.200.1 on PC1.
But from PC2, this destination is unreachable.
I don't know what the issue could be. Since. I'm just a Linux user (not an
expert) I have no clue where
On 06/13/2017 12:41 PM, Mojtaba Mansour Abadi wrote:
> Hi Everyone,
>
>
>
> I am trying to connect two PCs using B210 USRPs and tunnelling method.
>
>
>
> After going through examples and documents I came ups with the attached
> flowgraph.
>
>
>
> I run the flowgraph on both machines
11 matches
Mail list logo