Hi Marcus and Marcus,
Thank you for the valuable comments given. It made us to shrink all our
focus on OpenBTS. But I see an inactive list in openbts side made me to
wait for there response for a while. That's why I thought to circulate this
in gnuradio list hoping for any assistance to overcome t
The other Marcus here, I was the one that said something about the LEDs:
If your N210's transmit LED is not on, then openBTS simply did not
instruct the USRP to send samples.
Thus, you will have to fix the problem on openBTS side. I'm pretty sure
we went through all the diagnostics that made sense
Hi Marcus,
> Can you ping the N210?
Yes. "ping 192.168.10.2" works fine.
> If you use: uhd_usrp_probe --args addr=192.168.10.2, What happens?
"uhd_usrp_probe" also works fine. Couldn't check with --args. I am away
from the board now for few hours. Until then...
> Is your ethernet interface con
On 04/07/2015 08:14 AM, Zamrath Nizam wrote:
Hi all,
I have recently installed openbts-2.8 on a banana-pi (Processor:
armv7) board to work with USRP N210. Had all the pre-requisite
installations and procedures been done, I noticed that, the
transmitter is not working.
Though this issue seem
Hi all,
I have recently installed openbts-2.8 on a banana-pi (Processor: armv7)
board to work with USRP N210. Had all the pre-requisite installations and
procedures been done, I noticed that, the transmitter is not working.
Though this issue seems to be related with openbts but since they are not