2011/11/29 Kevin Tien
> Hi,
>
> We're using USRP2s with the RFX2400 daughterboards, and we've recently
> switched from the old USRP drivers to the UHD drivers as per general
> recommendation. However, we've run into a few problems that have us
> stumped:
>
> 1) Previously, our receiver gains were
On 11/29/2011 03:37 PM, Josh Blum wrote:
On 11/29/2011 02:38 PM, Kevin Tien wrote:
Hi,
We're using USRP2s with the RFX2400 daughterboards, and we've recently
switched from the old USRP drivers to the UHD drivers as per general
recommendation. However, we've run into a few problems that have u
Are you selecting the correct antenna? Its possible the default RX
antenna setting is different.
We'll check it out, but we only have the one antenna hooked up...
It'd be interesting to find out that the SMA connector can pick up the
signal! So I gather there should /not/ be any change in receiv
On 11/29/2011 02:38 PM, Kevin Tien wrote:
> Hi,
>
> We're using USRP2s with the RFX2400 daughterboards, and we've recently
> switched from the old USRP drivers to the UHD drivers as per general
> recommendation. However, we've run into a few problems that have us
> stumped:
>
> 1) Previously, o
Hi,
We're using USRP2s with the RFX2400 daughterboards, and we've recently
switched from the old USRP drivers to the UHD drivers as per general
recommendation. However, we've run into a few problems that have us
stumped:
1) Previously, our receiver gains were set to 0 dB and we had no
problem rec
