radio@gnu.org; usrp-us...@lists.ettus.com
제목: Re: [Discuss-gnuradio] USRP DDC and GNURadio Bandwidth Problem
Hi,
I don't want my sampling rate to be 25 kHz. My sampling rate is already 195312
Hz which is I think the minimum sampling rate for X310.
What I want is to filter out the frequencies which are at leas
Hi,
I don't want my sampling rate to be 25 kHz. My sampling rate is already
195312 Hz which is I think the minimum sampling rate for X310.
What I want is to filter out the frequencies which are at least 25 kHz away
from my center frequency. For example I don't want to see a transmission
which is
Hello Ali,
To extend what Marcus has said, here is a link to the UHD manual page about
sample rates.
http://files.ettus.com/manual/page_general.html#general_sampleratenotes
Regards,
Derek
On Mon, May 14, 2018 at 8:54 AM, Müller, Marcus (CEL)
wrote:
> Hi Ali,
>
> just like the
Hi Ali,
just like the console will tell you, 25 kS/s is simply impossible with
an X310; instead, the minimum possible rate was used.
You should probably just configure your X310 to get you e.g. 500 kS/s,
and then resample in digital domain. If you're hesitant to design your
own decimating
Hi to all,
I am using GNURadio to control an X310. I want to get IQ samples for only
25 kHz bandwidth.
When I wrote 25 kHz to the bandwidth line in UHD-Source block in GNURadio,
I still see the signals at 50 kHz or 75 kHz away from the center. My
sampling rate is 195312 Hz. When checked in