> AB
> --
> *From:* Michael Carosino <m.caros...@gmail.com>
> *Sent:* Monday, November 20, 2017 1:24:17 PM
>
> *To:* Bakshi, Arjun
> *Cc:* discuss-gnuradio@gnu.org
> *Subject:* Re: [Discuss-gnuradio] X310 with 2 WBX in full duplex
>
> I've
r the sampling rate (not the 200e6 one)
> doesn't help.
>
> Thank you,
>
> AB
> From: Michael Carosino <m.caros...@gmail.com>
> Sent: Monday, November 20, 2017 1:24:17 PM
> To: Bakshi, Arjun
> Cc: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio]
:17 PM
To: Bakshi, Arjun
Cc: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] X310 with 2 WBX in full duplex
I've had this error before, can't recall the solution however one thing to try
is setting the DDC block select parameters. On the upper DDC block set block
select to 0 and on the low
mpt, and grc file attached.
>
> Thanks,
>
>
> AB
>
>
> --
> *From:* Michael Carosino <m.caros...@gmail.com>
> *Sent:* Monday, November 20, 2017 12:31:52 AM
>
> *To:* Bakshi, Arjun
> *Cc:* discuss-gnuradio@gnu.org
> *Subject:
; Also, what are DUC input/out rates? What should the "analog bandwidth" be
> set to? Same as sampling rate or 0, or something else?
>
> Thank you,
>
>
> AB
> --
> *From:* Bakshi, Arjun
> *Sent:* Monday, November 6, 2017 2:01:16 PM
jun
Cc: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] X310 with 2 WBX in full duplex
Hi,
I don't believe you need to install Xilinx/vivado/etc - that's only needed if
you want to create your own rfnoc blocks (like I did for the transmitter, but
ideally you avoid this as its a lot o
ros...@gmail.com>
> *Sent:* Thursday, November 2, 2017 10:21:52 PM
> *To:* Bakshi, Arjun
> *Cc:* discuss-gnuradio@gnu.org
> *Subject:* Re: [Discuss-gnuradio] X310 with 2 WBX in full duplex
>
> Hi,
>
> I've successfully gotten the two tx-rx setup on an x310 you've
> descri
Few mistakes I caught after sending it. Center frequencies I had chosen were
out of range for WBX. Fixed now. Also, image file now has proper extension.
Thank you,
AB
From: Bakshi, Arjun
Sent: Thursday, November 2, 2017 9:38:48 PM
To: discuss-gnuradio@gnu.org
Hi,
I'm trying to get two Tx-Rx links running with an X310 with two WBX
daughterboards in it. I've used multi-channel USRP source/sink blocks, but I'm
experiencing latency (L) errors with the connection, and then the application
(GRC) hangs. I've attached an image of my USRP source/sink
