Jeff Brower wrote:
> U12 is the PHY. PHYs tend to run somewhat hot, so likely what you're seeing
> is Ok. But, with the top off, you could
> try pointing a large fan at the chip, and see what happens again from cold
> start. If the fan reduces the chip surface
> temperature to the point where
Steve-
> Further to my problem trying to discover the USRP2. From a cold start
> (the USRP2 was left without power since my last posts) I configure the
> GigE port using ethtool and enable TX pause frames (this seems to be
> necessary magic on my PC). I then run this at the command line:
>
> while
Hi,
Further to my problem trying to discover the USRP2. From a cold start
(the USRP2 was left without power since my last posts) I configure the
GigE port using ethtool and enable TX pause frames (this seems to be
necessary magic on my PC). I then run this at the command line:
while true; do clea
Hi,
I have created a new SD Card with the latest trunk image of the FPGA and
the s/w for the WBX and the situation is exactly the same as before.
The host is an IBM T61p Thinkpad running Debian testing. I normally run
Network Manager but have stopped it and brought the eth0 port up via the
comman
Steve,
If you have GNUradio trunk installed, did you update your SD card with
a firmware from:
http://gnuradio.org/releases/usrp2-bin/trunk/
You'll need txrx_wbx.bin
Jason
On Fri, Apr 23, 2010 at 10:56 PM, Steve Glass wrote:
> Hi,
>
> I've just received my USRP2 and WBX. Using the Ettus SD Ca
-
From: "christophe.par...@etsmtl.ca"
Date: Sat, 24 Apr 2010 11:22:31
To: stevie.gl...@gmail.com;
discuss-gnuradio@gnu.org
Subject:
RE : [Discuss-gnuradio] find_usrps "No USRP2 found."
Hi Steve !
Perhaps you'd need to run this before running find_srps :
$ sudo ethtool -A
g de la part de
Steve Glass
Date: sam. 24/04/2010 01:56
À: discuss-gnuradio@gnu.org
Objet : [Discuss-gnuradio] find_usrps "No USRP2 found."
Hi,
I've just received my USRP2 and WBX. Using the Ettus SD Card the USRP2
switches on, six LEDs briefly light and then just D and F remain li
Hi,
I've just received my USRP2 and WBX. Using the Ettus SD Card the USRP2
switches on, six LEDs briefly light and then just D and F remain lit.
Connect the USRP2 directly between T61 and USRP2 and both ethernet ports
have a green LED showing a solid light.
GNURadio trunk is installed so I run f
