On Sun, Mar 15, 2009 at 9:15 PM, Shabbir Ahmed
shabbirahmed...@gmail.com wrote:
3. Now my question. Is it possible to receive two streams from a single
daughter board on a usrp, one from antenna TX/RX and the other from
antenna RX2. ie.
input 1: subdev(0,0)---TX/RX
input 2:
Hi Eric:
Thank you loads again for your recommendations. I did go through both the
files that you mentioned.
1. For the technique used in *usrp_wfm_rcv2_nogui.py. *We can retrieve
two receive streams from a one daughter board, but this uses only one of the
antennas either the TX/RX or RX2.
2.
Hi Everyone:
I am guessing that my last post was not clear since I didnt get any replies.
So here I go again.
1. I am using two Flex900 daughter cards on a single USRP.
2. I am getting to select two subdevices (0,0) and (1,0) ie. daughter board
A or daughter board B
3. On each subdevice I am
On Thu, Mar 12, 2009 at 09:40:29AM -0700, sHabzbd wrote:
Hi Everyone:
I am guessing that my last post was not clear since I didnt get any replies.
So here I go again.
1. I am using two Flex900 daughter cards on a single USRP.
2. I am getting to select two subdevices (0,0) and (1,0) ie.
