Hi,
> On Tue, 5/12/09, Dominik Auras wrote:
> Could you try to set different fusb parameters? I observed
> that, since the FX2 is less likely to be a bottleneck,
> tuning of these parameters may have greater impact than
> before. E.g. my laptop did an additional 2 MB/s with B =
> 16384 and N = 1
This is a great achievement. I tested it with an old 2GHz P4 laptop (but with good USB controller) and was able to reach about 41MB/sec. The tests were with/without FPGA HB filter in one direction using your pre-built images.
Could you try to set different fusb parameters? I observed that, since
Hi Dominik,
> On Sun, 5/10/09, Dominik Auras wrote:
> Hi!
>
> Well, as I promised, I am going to share my results with
> the community. So here it is:
>
> http://www.dominikauras.de/gnuradio/usrp_fx2.html
> I spent much time on verifying, but of course can't promise
> it is bugfree. So I invit
On Sat, 09 May 2009 18:01:12 -0400, Dominik Auras
wrote:
Hi!
Well, as I promised, I am going to share my results with the community.
So here it is:
http://www.dominikauras.de/gnuradio/usrp_fx2.html
Condensed into a patch file. I have uploaded a few bitstreams and a
binary of the fir
Hi!
Well, as I promised, I am going to share my results with the community.
So here it is:
http://www.dominikauras.de/gnuradio/usrp_fx2.html
Condensed into a patch file. I have uploaded a few bitstreams and a
binary of the firmware, too. There is some documentation on the site
that is mainl
