Sent: 15 December 2015 17:16
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] using USRP to get scattering parameters
On 12/15/2015 11:31 AM, Yan Huang wrote:
Hi all,
I have tried to use USRP B210 and GNUradio to send and receive signal, and now
I want to get the network's scattering
-gnuradio-bounces+eexyh22=nottingham.ac...@gnu.org
[mailto:discuss-gnuradio-bounces+eexyh22=nottingham.ac...@gnu.org] *On
Behalf Of *Marcus D. Leech
*Sent:* 15 December 2015 17:16
*To:* discuss-gnuradio@gnu.org
*Subject:* Re: [Discuss-gnuradio] using USRP to get scattering parameters
On 12/15/2015
> To: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio] using USRP to get scattering parameters
>
> Hi Yan,
>
> that is an extremely broad question; what kind of network analyzer do you
> have in mind?
>
> Notice that you will have to calibrate the B210 r
=nottingham.ac...@gnu.org] On Behalf Of
Marcus Müller
Sent: 15 December 2015 16:53
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] using USRP to get scattering parameters
Hi Yan,
that is an extremely broad question; what kind of network analyzer do you have
in mind?
Notice that you
rcus D. Leech
> Sent: 15 December 2015 17:16
> To: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio] using USRP to get scattering parameters
>
> On 12/15/2015 11:31 AM, Yan Huang wrote:
> Hi all,
>
> I have tried to use USRP B210 and GNUradio to send and receive
Hi all,
I have tried to use USRP B210 and GNUradio to send and receive signal, and now
I want to get the network's scattering parameters. But I don't know how to get
them using the software.
Is there anybody can give me some advice?
Thanks in advance.
Yan
This message and any attachment
; discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] using USRP to get scattering parameters
Hi Yan,
With the same antenna: That is going to be impossible, because you can't TX and
RX on the same port with a USRP.
Also, the TX would be extremely loud and possibly even damage RX.
Calibration
On 12/15/2015 11:31 AM, Yan Huang wrote:
Hi all,
I have tried to use USRP B210 and GNUradio to send and receive signal,
and now I want to get the network’s scattering parameters. But I don’t
know how to get them using the software.
Is there anybody can give me some advice?
Thanks in
Hi Yan,
that is an extremely broad question; what kind of network analyzer do
you have in mind?
Notice that you will have to calibrate the B210 random TX/RX phase
offset after every tune.
Best regards,
Marcus
On 15.12.2015 17:31, Yan Huang wrote:
> I have tried to use USRP B210 and GNUradio to
