[Discuss-gnuradio] USRP2 Ethernet port does not work

I've been using many USRP2s for my project. Today one of the USRP2s cannot be recognized through Ethernet. Only the green LED on the Ethernet port lights up. I hooked up the Serial debug port and it says, ethernet flow control: SYMMETRIC LANSR: LINK_GOOD ethernet flow control: SYMMETRIC

Re: [Discuss-gnuradio] USRP2 Ethernet link Issues

Thanks again Josh. I re-flashed the the SD card with the images from: http://www.ettus.com/downloads/uhd_releases/003_000_000/images I downloaded the corresponding .deb file and installed it using dpkg. Set the UHD_IMAGE_PATH to /usr

Re: [Discuss-gnuradio] USRP2 Ethernet link Issues

On 03/31/2011 09:29 AM, Praveen Vikram wrote: > Sorry for the late reply, just got into my lab. > > When I start the USRP2, This is what happens: > F lights up first, > then all the LEDS flash > and D and F stay on. > > I tried burning txrx_raw_eth_20100608.bin/u2_rev3-20100603.bin as my fw/fpg

Re: [Discuss-gnuradio] USRP2 Ethernet link Issues

Sorry for the late reply, just got into my lab. When I start the USRP2, This is what happens: F lights up first, then all the LEDS flash and D and F stay on. I tried burning txrx_raw_eth_20100608.bin/u2_rev3-20100603.bin as my fw/fpga on the SD card and even that does the same thing. I'am using t

Re: [Discuss-gnuradio] USRP2 Ethernet link Issues

On 03/30/2011 06:38 PM, Praveen Vikram wrote: > Hi Everyone, > > I am currently trying to play around with the USRP2, but am not even > able to connect to it. > another thing worth checking might be firewall issues and if ping works: http://www.ettus.com/uhd_docs/manual/html/usrp2.html#communi

[Discuss-gnuradio] USRP2 Ethernet link Issues

Hi Everyone, I am currently trying to play around with the USRP2, but am not even able to connect to it. I have the latest UHD and GNURadio installed from git running on Ubuntu 10.04. I'am connecting the USRP directly to the Gigabit Interface on my computer. I used the Firmware/FPGA image from h

Re: [Discuss-gnuradio] USRP2: Ethernet port doesn't work

Do you have a 1000Mb/s port on your pc. USRP2 works only with a 1000Mb/s. - Original Message - From: Tommaso P To: discuss-gnuradio@gnu.org Sent: Friday, March 11, 2011 6:30 AM Subject: [Discuss-gnuradio] USRP2: Ethernet port doesn't work Hi, i'm trying to c

[Discuss-gnuradio] USRP2: Ethernet port doesn't work

Hi, i'm trying to connect the USRP2 by the Ethernet port. It seems as if the port doesn't work. The firmware is properly loaded (D and F lights are on) and the network is properly configurated, but when i try to sniff the USRP2 ethernet port, no data is generated/received. And no light upon the

Re: [Discuss-gnuradio] USRP2 ethernet port change

Go to /etc/udev/rules.d and edit 70-persistent-net.rules (ATTR{address} and NAME), or just remove lines for network interfaces and reboot. Phil From: Shuo Yang To: discuss-gnuradio@gnu.org Sent: Sat, 5 February, 2011 22:20:53 Subject: [Discuss-gnuradio

[Discuss-gnuradio] USRP2 ethernet port change

Hi, I am trying to connect USRP2 with GNU Radio in Ubuntu operating system, but the default ethernet port for USRP2 is eth0 but my computer is eth5 so do you know how to change the default ethernet of computer to eth0, thanks in advance! Best Wishes! -- Shuo Yang, _

Re: [Discuss-gnuradio] USRP2+Ethernet+GNU Radio-Daughterboard

On Fri, 2010-10-22 at 12:54 -0200, Bernardo Gonçalves wrote: > Hello everybody! > > It's my first message here and since I'm a newbie with this subject, I > would like to ask for some suggestions and confirm if it is possible > to do what I propose. > > We've got some USRP2 kits, but the main pro

[Discuss-gnuradio] USRP2+Ethernet+GNU Radio-Daughterboard

Hello everybody! It's my first message here and since I'm a newbie with this subject, I would like to ask for some suggestions and confirm if it is possible to do what I propose. We've got some USRP2 kits, but the main problem is that we don't have any daughterboard yet. Since the Gigabit port wo

[Discuss-gnuradio] usrp2 ethernet

Hi Folks, I know a few of you were having problems with certain gigabit ethernet cards. I've fixed a couple of what I think are relatively minor bugs in how we were setting up the usrp2's ethernet PHY chip to advertise our capabilities. We now correctly advertise: That we ONLY do 1000BASE-T