Hi Matt,
Thanks a lot! So, you means I just need connect between Tx/Rx and leave Rx2
unused for RFX 900. But I want to implement FDD (frequency division duplex),
it should use Rx2. Do I need to make change to hardware? how?
Thank you!
2007/7/6, Matt Ettus <[EMAIL PROTECTED]>:
zhifeng chen wrot
>
> Question. What is "a lot of attenuation" (ballpark?) I have a RFX1800
> transmitting at "20" going into (cabled) a dbsrx with gain "40".
> Between the transmitter and receiver I have 40dB worth of
> attenuators... Would you suggest any different? I learnt the hard way
> on the first dbsrx :)
Message: 2
Date: Thu, 05 Jul 2007 10:10:15 -0700
From: Matt Ettus <[EMAIL PROTECTED]>
Subject: Re: [Discuss-gnuradio] why two switches and two Rx in RFX
...
I use two sets of USRP with RFX900 to test a FDD( frequency devision
duplex) by cable connection. According to my experience, the
zhifeng chen wrote:
> I am wondering why there are two switches in the RFX series daughter
> from schematics. It seems their purposes is different: one for switch
> between Tx and Rx, another switch between Rx and Rx2. So, my questions as:
> 1. we may use one tx and rx enough, why need to use two R
I am wondering why there are two switches in the RFX series daughter from
schematics. It seems their purposes is different: one for switch between Tx
and Rx, another switch between Rx and Rx2. So, my questions as:
1. we may use one tx and rx enough, why need to use two Rx?
2.I follow the python co