Hi Larry,
I don't have experience with the N310 but I have used the X310 with a
TwinRx card. I had a Gnuradio flow setup to capture both channels into
files. 10Gbit network. Executing the Python script from Gnuradio
resulted in captures being stored as two INT16 IQ files. When I looked
at
Hi Larry,
Which carrier frequency do you use for your tests? Something like 2.4GHz?
do the 4 receive channels have a stable phase between them? i.e. if you
don't move the transmit antenna or your RX array, the phases do not change?
I assume you have 1 TX antenna and 4 RX antennas. I would
On 06/29/2021 04:51 PM, Larry wrote:
Hello everyone,
I am having an issue with achieving a phase-synchronous RF
configuration using an N310 with an Octoclock and a linear antenna
array. What I believe should be the expected results of this setup is
that each AD9371 should receive synchronous
Hello everyone,
I am having an issue with achieving a phase-synchronous RF configuration using
an N310 with an Octoclock and a linear antenna array. What I believe should be
the expected results of this setup is that each AD9371 should receive
synchronous signals aligned in phase, with a